High Performance Basalt Fiber Chopped Strand Mat with Roving Woven Fiberglass Cloth
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 4000 kg
- Supply Capability:
- 100000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Basalt Fiber Chopped Strand Mat High Performance
Products Description
Basalt fiber chopped strand mat in the basalt interspersed single fiber disorder interlaced to form a non-directional three-dimensional porous structure. As a result of 7-9μm smaller fibers, large surface area, porosity is about 80%, non-boron, can be used for advanced air filtration and purification, thermal acoustic insulation materials, hot-rolled steel mirror, aluminum and high temperature soft bedding materials.
Applications of Basalt Fiber Chopped Strand Mat
Advanced air filtration system; electronics industry filtration, sound absorption, heat insulation, anti-vibration system; chemical, toxic and harmful gases, smoke and dust filtration systems;
car muffler, ships, ship insulation, thermal insulation, noise reduction systems
Product Traits
1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products;
2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter;
3.Excellent flexibility ensures good mold ability with no spring back at sharp angles;
4.Fast and consistent wet-out speed in resins and rapid air lease reduce resin consumption and production cost, and enhances productivity and mechanical properties of the end products.
5, The composite products have high dry and wet tensile strength and good transparency.
6, Optional for high strength with stiff mat for panel laminating and midle strength with soft mat for hand layup.
Basalt chopped strand mat Specifications
Model | Thickness (mm) | Width (mm) | Bulk Density (g / m³) | Areal density (g/m2) | Length (m / roll) |
TX6-500 | 6 | 1000 | 100-200 | 500 | 40 |
TX8-750 | 8 | 1000 | 140-200 | 750 | 30 |
TX10-950 | 10 | 1000 | 140-200 | 950 | 30 |
TX25-1750 | 25 | 1000 | 140-200 | 1750 | 20 |
FAQ
1. How long will you get reply?
Any inquiry will be replied within 24 hours. Usually we will reply within 12 hours.
2. How long is warranty period?
We provide 3 year warranty period.
3. What is your MOQ?
Our MOQ is 4000 kgs.
- Q:Nominal interpretation of fiber reinforced concrete
- Mix composite materials with random and uniform distribution of short fiber in cement concrete, including steel fiber reinforced concrete. Technical specification for fiber reinforced concrete structures CECS.
- Q:Production process of glass fiber tube
- The tube is made in continuous movement of mandrel. It should be feed into steel mould fixed in bearing. After continuous filament winding and centrifugal casting process finishes,the number of pipe manufacturers using reciprocating fiber winding process is more than that of other two production technology. After the resin in products has been solidified, you should inject unsaturated resin with catalyst at the one side of steel mould. This process is that pipe passes through a feeding station whcih aims to supply resin presoak twistless roving. There are mainly three manufacturing techniques of glass fiber pipe. Reciprocating fiber winding technology (belonging to the fixed length method). The main material includes glass fiber reinforced materials and sand. Auxiliary angle (wingding angel) is controlled by the ratio of impregnating vessel movement speed and mandrel rotate speed. Pipe usually solidifies under high temperature. With the help of centrifugal force, its applicability is very good. Continuous filament winding process(belongs to continuous method). Impregnating vessel movement is controlled by computerization machine. With the number of the layers increases gradually, inner tube form a smooth plane due to the centrifugal force and mandrel gets out of glass?reinforced?plastics pipe. Centrifugal casting process (belonging to the fixed length method). Tube made in this way, is also known as glass fiber reinforced plastic sand pipe. Reciprocating filament winding process In this process
- Q:The difference between EPS and GRC, advantages and disadvantages, construction technology, key points, the scope of application.
- Fissure is easy to leak water in the cold temperature. Flat connector does not absorb water with a little amount of coating and short production cycle (about 7-12 days). GRC decorative elements is heavy. Due to its shorter installation, it does not require very specialized workers. There is no problem under the temperature of plus or minus 50 degrees Celsius. It has excellent waterproof performance. It has pore and is not easy to chap, but it is easy to deal with and carry with good toughness. If you want to refit it, you need to do some waterproofing work. The connector can absorb water and the material used for producing is belongs to stiffness material with less crack. Finished products features with lightweight, crisp, poor uniformity. High-level job is difficult to process without leakage. Cracking phenomenon is serious and can be cut. Hot bridge is different to control with protective layer features with weathering resistance. Its weight account for 10% of the traditional non light components. Large deformation period is slow. It can be bended moderately. It features with freezing and?thawing resistance and little deformation. It is easy to install and crack so that it needs to be trimmed. It is easy to be linear deformation.
- Q:The safe operation of glass fiber twisting frame
- The operator is responsible for hook wrap, decollation, changing roving and cleaning. Doffer is responsible for cleaning. Both of them needs skills.
- Q:The difference between glass fiber plain cloth and glass fiber woven roving.
- According to the weight and width, there are many models including 200 g, 400 g, 600 g and 800 g. The width of 900, 1000, 1270 and 1400 are commonly used. The width is from a few centimeters to 3 meters and the weight is from 60 to 800.
- Q:What does fireproof bag used for ?
- It is made from cotton.
- Q:How to make a glass fiber reinforced plastic?
- The answer is no. The glass fiber reinforced plastic grille can be made with a mold, so it would be very easy to do it, while by manual, it would be troublesome, and do not have compressive property.
- Q:What are the advantages of glass fiber reinforced plastic antennas? What's the difference between an ordinary antenna and an ordinary one?
- SMC and its molded products have the following characteristics: light weight, high strength, precise size, good batch quality and zero shrinkage. With a surface level, mechanization, a high degree of automation, applicable to high surface quality requirements, large output, uniform thickness of the product.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
High Performance Basalt Fiber Chopped Strand Mat with Roving Woven Fiberglass Cloth
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 4000 kg
- Supply Capability:
- 100000 kg/month
Offcanvas right
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords