Launching Gantry / Beam Launcher
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
This machine can combine 900 ton tyre trolley to work for double-line high speed Railway Bridge with box beams in the length of 20m, 24m and 32m. |
- Q:Such as Title ah.....I am sorry that the steel structure
- 84798990 commonly used Longmen bridge erecting machine84798990 improved Longmen bridge erecting machine84798990 improved double beam bridge machine84798990 automatic bridge erecting machine84798990 ordinary Longmen bridge erecting machine84798990 common type of double guide beam bridge machine
- Q:100 tons of bridge crane can lift 100 tons beam
- Need to load 10%. If you say that the 100t is the rated load of the bridge crane, there is no problem with hanging 100t weights.
- Q:What are the advantages and disadvantages of the overhead bridge erecting machine compared to the lower bridge erecting machine
- High lifting height, easy installation. But in the transition to the higher requirements of the road (height, width, bearing capacity, etc.).
- Q:Bridging machine which consists of four parts
- D, brake system - including parking brake, working brake;E, steering system - including the upper and lower hinge body, steering cylinder and the corresponding operating mechanism;F, the work system - including the bucket, the big arm, the rocker arm, the connecting rod and the correlation pin shaft;G, hydraulic system, including hydraulic system, hydraulic system, hydraulic system, hydraulic system, hydraulic system, hydraulic system, cooling system, lubrication system;
- Q:Self-propelled bridge erecting machineMore than 80 tons of self erecting machine price is about how muchKnow the trouble to provide point information!
- Vertical and horizontal electric bridge operation, high efficiency, centralized control, simple operation, convenient transportation and other field weight reduction, 30? 0%, the equipment utilization coefficient, l, skew bridge can be erected at any angle, the radius of curved bridge erection > =250 meters, and only 3 days, the working efficiency can be increased by more than 50% of the machine. Now in the highway on the application, the effect is good.
- Q:How much is a bridging machine
- Bridge erection machine is mainly composed of steel structure, lifting, walking and other components, of which the proportion of steel structure
- Q:Purchase of special equipment, the use of units of evidence is the use of special equipment license?Where is the place of use or production?
- It should be where you use where to apply for registration
- Q:What is the technical parameter of 30m/100t fixed guide beam of bridge erector?
- Car (horizontal) walking speed (m/min) 3.15 3.15 3.15Bridge machine through hole velocity (m/min) 5.566Beam transport flat car speed (m/min) beam flat car speed 6.6m/min, return speed 13m/min (variable frequency speed)Deflection of work (mm) maximum deflection 706034Longitudinal forward cantilever deflection 800630350Adaptive bending radius (m) 350300200To adapt to the incline angle of 0~45 degrees 0~45 degrees 0~45Machine power ~104kw ~92kw ~77kw
- Q:I would like to ask what types of bridge machine
- There are also based on tonnage points, highway bridge machine general tonnage is relatively small, generally less than 300 tons. The railway bridge erecting machine, especially the high speed railway bridge erecting machine, has a relatively large tonnage, 450 tons and 900 tons. Some manufacturers of bridge machine can be used for public rail, this bridge is generally suitable for the erection of ordinary railway bridge.
- Q:I would like to know the working principle of JQ IV 160t/40m bridging machine?
- The guide beam is composed of double girder truss, a connecting pin, a connecting frame, the front rear connecting frame, wire rope fixing rack etc.. The guide beam is arranged on the lower part of the central assembly (including 2 active flat, middle, middle oil shake rolled flat top), tail assembly (including 2 tail oil top and tail legs and tail bearings), front assembly (including 2 sets of active front roller, flat, flat front beam wave temporary support, front). The upper part of the two guide beam is welded with a track, and the track is provided with 2 longitudinal shift flat car assemblies. The guide beam is arranged inside the platform, or via bridging machine can go through temporary support from Taiwan to the top cap.The longitudinal moving flat car assembly is a single track active flat car, each longitudinal shift flat car assembly is controlled by the electric circuit to realize the longitudinal walking. Can be used alone, can also be used online.The moving car is composed of two parts: the walking mechanism and the lifting mechanism. The lifting mechanism is used for hoisting and the traveling mechanism realizes the lateral displacement.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Launching Gantry / Beam Launcher
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords