Rusted Galvanized Steel

Hot Products

construction building materials steel profile galvanized metal stud and track

Galvanized Profiles for Dry Wall Galvanized Profiles

Drywal steel profile/Good construction material

Steel Profile-Drywall Grid System for Partition

Gypsum Board Steel Frame or Keel Light Keel

Cold Rolled Steel Galvanized Profiles Drywall C Channel steel sizes

Galvanized steel profiles U/C channel for drywall

Factory Supply Light Steel Keel T-Bars Galvanized Ceiling T Grid Good Quality Galvanized

Galvanized stud for gypsum drywall metal stud and track

Cold formed Profile Steel Drywall for ceiling structure

FAQ

What is the pros and cons of a brick or a gypsum board?

Wall, then the sound is very important, otherwise the side of the talk there all heard, this wall is very embarrassing. Light gypsum board, of course, can not be soundproof, the key is to choose the appropriate sound insulation cotton, and now people are more popular in the interior decoration is the gradient of sound-absorbing cotton, from environmental protection, fire, sound-absorbing efficiency and other considerations, gradient sound-absorbing cotton are present Home, office decoration more appropriate, such as the larger domestic conference center are using this sound insulation material.

With light steel keel gypsum board do partition wall price how to count?

Baoqing about 25, all 100-130 (material pricing).

Light steel keel partition wall construction process is what

Light steel keel partition wall - → installation of the door hole box - → installation along the top keel and along the keel → vertical keel sub-file - → installation of vertical keel - → installation of horizontal keel card - → installation panel - Sewing practice - → face layer putty paint (or paint).

Light steel keel gypsum board wall height is how to determine

D = <l 240 Parameter Description: d: Maximum deformation of the component under uniform load, unit mmq: Uniform load, unit Pa, test In the composition of the material, the cross-sectional nature of the wall stiffness coefficient: EI value of the test to determine the length of the wall The use of 15mm plate instead of 12.5mm plate, the wall stiffness EI can be increased by 33% 2. The keel spacing from 600mm to 400mm, wall EI value increased by 50% 3. The keel spacing reduced from 400mm to 300mm, the wall EI value increased by 50% 4. keel on the wall than the non-buckle wall, EI value increased by 60% 5. Use type I keel than the use of C-keel, EI value increased by at least 100%. The effect of thickness on the EI value is very small relative to several other factors, EI is called bending stiffness, 75 keel spacing is 400, double-sided single layer 12mm gypsum board wall EI = 4.6 × 1010 according to the actual test EI value of the structural partition system: (unit: N.mm2, 1010)

The room to remove the partition, can not retain the original light steel keel gypsum board ceiling?

It is possible that you said that the wall above is a beam, so that when you remove the wall, the gap between the two ceilings to do a false beam to solve. But if this place did not beam, then we must consider the demolition or not split!

In a layer of 6 meters high in the big room, do 2.8 meters high light steel keel partition. Big room to do mineral wool board ceiling, how to connect the two?

Can be directly connected, but not solid. How are they all know what they are.

What is the light steel keel gypsum board partition? What are the characteristics?

1. Wall shrinkage deformation and board cracks: the reason is the vertical keel tight top and bottom keel, no extension of the amount of stretch, more than 2m long wall is not controlled deformation joints, resulting in wall deformation. The wall should be left around the gap 3mm, which can reduce the temperature and humidity caused by the deformation and cracks. 2. Light steel skeleton connection is not strong, because the local node does not meet the structural requirements, the installation of local nodes should be strictly in accordance with the provisions of the law. Nail spacing, location, connection method should meet the design requirements.

4 m long prefabricated board can do light steel keel double gypsum board wall?

Yes, because the prefabricated board toughness is better, and its specifications are not the kind of chunks, if the chunk can withstand the weight will be reduced in the middle of the possibility of falling to increase .. Light steel keel wall itself The weight is not heavy, coupled with the ceiling is also force, then the weight of the ground will be reduced accordingly