Annealing Cast Iron

Hot Products

GATE VALVE AWWA/ ANSI NON-RISING STEM RESILIENT SEATED DUCTILE IRON

GATE VALVE RISING STEM WEDGE DUCTILE IRON DN40-DN600

Cast Iron gate Valve Standard:DIN Structure: Gate Pressure: Medium

GATE VALVE NON-RISING STEM METAL SEATED DUCTILE IRON JIS

Cast Iron Gate Medium Temperature Standard Structure: Gate Pressure: Medium

GATE VALVE FLAT API PN16/ PN25/ PN40 /PN64

gate valve ； CLASS150--2500 gate valve ;

Cast Iron Gate Face to Face Dimensions:DIN3202F5 Structure: Gate Pressure: Medium

Cast Iron Gate vPackaging & Delivery Standard Structure: Gate Pressure: Medium

cast iron gate valve wooden box outside Standard Structure: Gate Pressure: Medium

FAQ

What is the wedge type gate valve wedge is what mean

B. wedge type single gate, it is the whole wedge gate. In the process of opening and closing the sealing surface is prone to scratches, easy to make the temperature change gate wedge live. It is a gate used for normal temperature, medium temperature and various pressures. C. wedge double plate, which is composed of two gates composed of spherical top hinged into wedge-shaped gate. The advantage is that the accuracy of the cover angle is lower; the sealing surface of the gate can be compensated by adding shim at the top of the seal; the temperature changes are not easy to cause the phenomenon of the card master, nor should it be abraded. Because the gate is movably connected and has more parts, it is easy to bond in the viscous medium and affects the sealing. Especially when the upper and lower baffles are corroded all the year round, the flashboard falls off arbitrarily. It is usually used for water, steam and gas pipelines.

How big valves and fittings need flange installation, such as gate valves, DN50, DN80 and the like?.

See, you choose 100 of the pressure is not high, you can not flange

What do gates, Z15T-10, Z15W-16T, Z45T/W-10, Z41T-10 mean?

Z15T stands for manual, internal thread connection, dark wedge single gate. The sealing surface is made of copper alloy. The nominal pressure is PN1MPa;Z15W-16T for manual, internal thread connection, dark wedge type single gate, the valve body material is copper alloy, the valve seat sealing surface material directly processed by the valve body, nominal pressure is PN1.6MPa;Z45T/W-10 stands for manual, flange connection, dark wedge single gate. The valve body is made of copper alloy, and the valve seat face material is directly machined by the valve body. The nominal pressure is PN1MPa;Z41T-10 stands for manual, flange connections, plain wedge single gate, sealing surface material is copper alloy, nominal pressure is PN1MPa.According to domestic valve model standards, the valve model is by the valve type, gate valve drive mode, gate valve connection, gate valve structure, sealing material, valve body material code to indicate

Z41T one 10 gate valve and Z44T one, 10 gate valve difference

Z41T one, 10 is single gate, Z44T one, 10 is double gateAccording to the provisions of the JB/T 308-2004 valve type programming method:Z== gate valve4== connection: flange type1== structure: Rigid single gate4== structure: Rigid double gateT== sealing surface material: copper alloy10== pressure rating: 1.0MPa

greater than DN50 of the pipeline butterfly valve?

I don't know why it was designed. Provide you with some information you refer to, I do not know if it works for you1, stop valve and gate valve are very expensive, more than DN50 can make a lot of money2, butterfly valve is only more than DN50, no small, there may be, but I almost can not see the market.3, like DN150, DN200 such cut-off valve, gate valve is very large, and the butterfly valve is relatively light, installation can save the cost of the block, the valve itself saves too much money.4, but most of the butterfly valve used for a long time are closed.

What is the allowable leakage rate of the gate valve D?

In GB/T 13927, the leakage rate of the valve is divided into 10 grades, namely: A, AA, B, C, CC, D, E, EE, F, G class. And stipulates that when the order contract does not specify, the metal sealing valve according to D requirements.

What are the differences between the gate valve and the cut-off valve?

Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, is not suitable for regulation and throttle. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used wedge gate valves form a wedge. The wedge angle varies with valve parameters, usually 5o. Wedge gate valve can be made into a whole, called the rigid gate; can also be made to produce micro deformation of ram, in order to improve its process of deviation, make up the sealing surface angle in the process, the gate is called the flexible gate. Valve closed, the sealing surface can only rely on medium pressure to seal, that is to rely on medium pressure to the gate sealing surface pressure to the other side of the seat to ensure the sealing surface seal, which is self sealing. Most of the valve is forced seal, that is, when the valve closes, to rely on external force to force the gate to the seat, in order to ensure the sealing surface sealing.A stop valve is a valve that closes the valve and moves along the center line of the valve seat. According to this form of valve movement, the valve seat opening change is proportional to the valve stroke. Because of the valve stem to open or close the trip is relatively short, but very reliable cut off function, and because changes in the valve seat and the valve stroke is proportional, is very suitable for flow regulation. As a result, this type of valve is ideal for use as a shut-off or regulator and throttling

What is an inverted seal gate valve?

It refers to the middle part of the valve sealing valve valve sealing surface, the valve cover has a sealing seat, which is the valve and stem as well as the joint of the valve rod and the valve cover (i.e. internal stuffing box at the bottom of a sealing structure).