Mottled Cast Iron

Hot Products

FAQ

Gate valve DN65 what does that mean?
Caliber 65, refers to the size of the gate valve, you want to buy it?
Generally, how big is the diameter of the installation flange plate gate valve?
Under normal circumstances:Flanged gate valves for piping over DN50,DN50 (below) can be made of wire or gate valves, or flanged gate valves (flanged valves or welded gate valves)
Valve flange drawing n- up to what
A bolt hole used to indicate a flangeThe value of N indicates the number of bolt holesUp to the numerical representation of bolt hole size
Does the relief valve have a gate valve?
The pressure reducing valve group is composed of an adjustable pressure reducing valve, a pressure gauge, a copper valve, a Y filter, a rubber soft joint, a spring pressure gauge, a pressure gauge, an air valve, a pressure gauge and a bent pipe.
The valve safety valve check valve + + + = exposed part of a water pump adapter? Five
There is integration now.Pump adapter SQ100. All contain.
The difference between flanged gate valve and common gate valve
Flange valve: English name; Flange Gate Valve is the gate opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. Gate has two sealing surface, the most commonly used mode gate valve of the two sealing surface to form a wedge, wedge angle with valve parameters vary, usually 50, medium temperature is not high when 2 degrees 52'. Wedge gate valve can be made into a whole, called the rigid gate; can also be made to produce micro deformation of ram, in order to improve its process of deviation, make up the sealing surface angle in the process, the gate is called the flexible gate.Ordinary gate valve: mainly used to connect or cut off the medium in the pipeline, not applicable to regulating medium flow. Gate valve applies to pressure, temperature and caliber range is great, especially for medium, large diameter pipesThe most important difference: flange gate valve and ordinary gate valve is different, flange gate valve quality, durable, easy to install, but higher prices, generally used for large pipelines. Ordinary gate valves are used for small caliber, easy to change places.
Notes on flat gate valves
Use, maintenance, maintenance and precautions1. valve before leaving the factory have made strength and sealing test, the use of all connections should maintain the initial state.2. this series of valve operating handwheel is marked with open and close rotary direction, and the upper part of rod is equipped with open and close height gauge for regulating indication.3. when the valve and pipeline welding, the valve should be opened, appropriate to protect the neck with moisture, minimize heat conduction, to prevent damage to the sealing packing parts.4. when the valve is closed, the lever shall not be used. When the gate is closed to the top, the handwheel shall be turned 1/2 so that the gate is in a floating state.5. in the use of the valve should be regularly to the valve cap injection grease joint into the quantitative grease.6., the valve in use, such as vulnerable parts and leakage, should be replaced in time.7., the valve in the overhaul process, the cavity should be cleaned, the assembly should be added to the transmission parts of grease.8. valve storage during the shutdown, the gate should be in the closed position, long-term storage should be placed in ventilated dry place, regular inspection and maintenance.
What does "Z45W-10T" mean?What does each letter stand for?
For type PN10 Z45W Brass Gate ValvesZ is the valve type code, which represents the gate valve;Driving mode is hand wheel (code name omitted);4 is the connection form code, which represents the flange;5 is the gate valve structure form code, represents for the dark pole wedge rigid single gate;