Non-Clog Submersible Sewage Water Pump for Irrigation
- Ref Price:
-
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Horizontal Centrifugal Double Suction Water Pump
1.Structure of Horizontal Centrifugal Double Suction Water Pump Description
Horizontal Centrifugal Double Suction Water Pumpis used for transporting pure water (particles density shall be max.1%by volumeand granular size shall be max 0.1mm in dimeter) of the liquids with physical and chemical properties similar to pure water. Type MD pump is applied with wear resist material, especially suitable for mineral drainage. The particles density shall be max. 1.5% (Max. of the granular diameter is 0.5 mm).The liquid temperature ofD, MD pumps shall be lower than 80°C.
2.Main Features of the Horizontal Centrifugal Double Suction Water Pump
• Compact structure, good appearance, low construction
•Operation stably, same inlet and outlet
•Convenient installation and maintenance
•Customized design is available, OEM and ODM are welcomed.
•Horizontally and vertically installation as different pipeline system
3.Horizontal Centrifugal Double Suction Water Pump Specification
Item | Multistage Pump |
Multistage Pump | Horizontal Multistage Pump For Pure Water |
Model | CMD |
Material | Cast iron,Stainless steel |
Mode | Horizontal |
Color | Blue |
Temperature | <=80°c< span=""><> |
Seal | packing seal |
Theory | Centrifugal Pump |
Structure | Multistage Pump |
Usage | Water |
Power | Electric |
Standard or Nonstandard | Standard |
Fuel | Diesel |
Pressure | High Pressure |
Application | Hot and cold pure water |
Outlet Diameter | 40-500mm |
Capacity | 6-1250 m3/h |
Head | 75-1800m |
Rotation Speed | 1450-2950r/min |
Power | 5.5-2400kW |
Certificate | ISO9001 |
Feature | High efficiency,Easy maintenance |
4.FAQ
① What is your product range?
Centrifugal pump, slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, single stage
pump, double suction pump, industry pump, oil pump, paper pulp pump, mud pump, self-priming pump, pipe
water pump, boiler water pump, etc.
② Are you a manufacturer?
Yes, we have been in manufacturing and marketing industry centrifugal pump over 20 years.
③ What information should I let you know if I want to get a quotation?
Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also
provide the pump model you are using now, price will be calculated as per the pump model, if not, we willrecommend relevant product for reference.
- Q: how do u know when u need to replace ur water pump or how do u know when its not working??? thanks
- You'll know when your engine overheats especially when the temp gauge hits H. If you suspect it isn't working just get it replaced and save your engine damaging itself due to overheating.
- Q: I have a 2000 Chevy Malibu with 123xxx miles on it. I notice coolant being leaked on the floor heavily and my car gets hot driving. It leaks when the car is on and stops when it is off. Could it be a water pump? What r the signs of a bad water pump?
- Doubt it is the water pump, it is more likely the lower intake manifold gaskets are leaking. This is a common issue on the 3.1L Malibu. NOTE: DON'T drive it like this, you may do serious damage to the engine. Better take it in for a Cooling system pressure test.
- Q: how do i take water pump off took all hoses and bolts i think off dont know whats holdin it on how many bolt hold it on i know the seal can hold it on ther but it wont budge even when i use block of wood and tap with hammer
- This Site Might Help You. RE: how do i take off water pump on 97 lt1 camaro? how do i take water pump off took all hoses and bolts i think off dont know whats holdin it on how many bolt hold it on i know the seal can hold it on ther but it wont budge even when i use block of wood and tap with hammer
- Q: I want to buy a tree spraying rig for my property but would like to know its theoretical capabilities first. The rig has a gas powered diaphragm pump capable of delivering 20 GPM @ a maximum pressure of 300 psi. The hose coming from the pump is 150' long and is 0.75in diameter. It has a solid stream nozzle that measures 0.1875in diameter. What would the maximum theoretical elevation that this setup could deliver a steady stream of water? The nozzle would be aimed at between 45 and 60 degrees from horizontal.
- well water exerts about 1 atm pressure (15psi) for each 33 feet of depth so 300psi is about 10 atm meaning that your pump could support a column some 330ft high then figure what pressure you would need to make your spray effective and subtract 33ft per 15psi this is only a ballpark estimate losses in hoses will be significant
- Q: it is a mazda b3000 pick up v6,it is coming from behind water pump,but it is not all the time, i would think that if pump is going it would be all the time, but it will go bone dry for a few dayswhen it does leak it leaves about an 8 inch spot on the driveway,temp gauge goes to its regular spot and does not move,any suggestions would be helpful,thanks
- stop feeding the neiborhood cats antifreeze thats why there looking mangey look let the car warm up or top it off and come back you have to figure when it leaks dont check it when its hot have it replaced dont overlook the obvious dont work with out jack stands dont operate on just a jack and wear your safty glasses check the chilsons website use metric
- Q: I am trying to change my daughters 2004 Grande Am water pump because people tell me it is squealing. We purchased a replacement pump and blue gasket glue. I know to remove the Serpentine belt (not sure which pulley to reduce tension on) then I need to know which bolts to un-tighten, won't the pump turn as a use the wrench? Is there a good video available on changing out the water pump? I've done maybe 5 water pumps in my lifetime all on V-8s with rear wheel drive, so they had easy access. Does anyone know the steps of removal or can someone point to a video of removal replacement?
- better make sure it,s not the belt squealing and not the pump. usually when a water pump goes out they will leak. i would be checking the belt first.
- Q: i just moved into a house that has a small (about 40 gal) pond. i wanted to put fish in it. i have everything but the water pump. i've been looking around and i've found many solar fountain heads (about $30) that are pretty cheap and then i found a solar oxygenator for $100. which one would help the fish more? flowing water or just oxygen?
- To be quite honest, they are roughly the same thing. For a small pond all you need is something to agitate the surface of the water. the carbon dioxide/oxygen exchange only occurs on the surface therefore a small fountain that agitates the surface would work, or a small air pump that causes bubbles. Both are just fine.
- Q: WHERE IS THE WATER PUMP LOCATED ON A 1995 HONDA CIVIC
- on the engine, in the front
- Q: Okay so we have a water pump outside instead of city water. A few days ago we noticed that it would turn off like always once the tank was full but then just would never turn back on. It was odd to us since it would always turn on and off at appropriate times. Now its on maybe 10 seconds and it shuts off. I took off one of the clear hoses it has and notices a green ooze inside it. I cleaned out the ooze and tapped some of the pipes in hopes of some more of it coming out. Since we have had a leak there is green stuff which i am guessing is lime, on the side of the tank. I'm also guessing this must bee the green ooze. What should I do? Now there is no water whatsoever being pumped and the time it does turn on very little water passes through. To me it sounds like something is blocking the pipes but if I pay hundreds for someone to come replace the pipes and check out the motor I dont want to end up with this problem again. If anyone has any information as to helping me I would so greatly appreciate it.
- do you have shallow or deep well its the middle of summer the well could be dry you might have lost your prime on your pump there will be a bolt for priming take bolt out pour water in to hole untill full restart pump if pump doesnt fill up you might a stuck foot valve.
- Q: Hi! I need to find out what kind of water pump I need to buy for an 1978 Swinger RV we just bought to refurbish. I've searched the internet, but nothing seems to tell me what kind I need.
- I believe they used a Dodge chassis for the swinger, now all you have to do is figure out which engine you have.
Send your message to us
Non-Clog Submersible Sewage Water Pump for Irrigation
- Ref Price:
-
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
