Auto Lift/Scissor Car Lift/3T 4T 5T Model
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 20000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Features
Load Capacity:3.5Tons
Power Supply:380V/50HZ
Horse Power:4HP
Power:2.2kw
Max Lifting Height:1750mm
Platform length:4500mm
Min height:150mm
Secondary Jack lifting Height:500mm
Lifting time:60sec
Net Weight:2Tons.
Features.
1.Turntable is mobile and available for kinds of cars.
2.All the chromeplate cylinders are import from TaiWan.
3.On the ground design.
4.All the pumps,seal kits of cylinder,ball valves are import from Italy.
5.Wile switch is added,it is controlled long distantly.
Specification
Item No. | CMSL3.0A |
Lifting capacity | 3000kg |
Lifting height | 2000mm |
Minimum height | 300mm |
Overall Width | 1880mm |
Length of Platform | 1550-1750mm |
Runway width | 540mm |
Lifting time | ≤75s |
Lowering time | >30s |
Motor | 220V/380V 50Hz/60Hz 1Ph/3Ph |
FAQ
1. Why should I choose CNBM scissor car lift?
There are several reasons you should strongly consider purchasing a CNBM Lift:
Top raw materials from only the finest plants
Only professional cost-effective equipment
Low prices with high quality revenue producing products
Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
The best customer service. Quick reply within 24 hours and more.
Great Warranty
2. How safe are your scissor car lift?
Our 2&4 post lifts have been tested and CE certified for safety . They also meet the American
and Australian Standard.
3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.
4. What type of fluid is required for my scissor car lift?
We recommend use of a SAE10 hydraulic fluid that meets an ISO 32 specification, approximately 3 gallons / 12L are required.
5. Are CNBM scissor car lift designed for commercial use?
All of our lifts can be used in commercial applications without any problems.
6. Do you offer any custom designs?
Yes,CNBM Lift provide OEM/ODM services to top range partners.Produce a superior product for you by your designs.
- Q: .. uld superconducting coils be mounted beneath a car to repel it against the force of gravity?Theoretically if it worked, the coils would act as permanent magnets so that relatively little energy would be needed to lift the car against the force of gravity.
- Still interesting. ( g ) However you may wish to consider the construction of the super colliders or the mega collider of Hadren. ( g )
- Q: How much does it Cost to get a car lifted for 22 inch or 24 inch rims?
- Varies all over the place. Much of the cost is based on the car itself. Front drive cars are much harder to lift, so much more $$$.
- Q: Danous Estenor may sound like the name of a character from a Tolkien novel, and he may look like a grizzly bear who could maul anyone who crosses his path. At 6-foot-3, 306 pounds, he probably could, actually. Off the field, though, the South Florida offensive lineman is more of the gentle giant type, more likely to channel his natural power to more productive ends — such as last February, for example, when he hulked out on a 3,500-pound car to save a man trapped underneath. From Friday‘s St. Petersburg Times:
- Natural, but an extreme example. First, he did not lift a 3500 lb. car. He lifted a corner of a car which had 60% of its weight in the front end. The lift was a matter of just inches and for a moment. It was done with the assistance of two other men. The actual weight could have amounted to something like 800 lb., which a 300 lb. man could lift momentarily for a few seconds. That's especially true with an adrenaline surge. My mother was barely over five feet tall, but she suffered from schizophrenia. In some of he manic episodes, she demonstrated a strength that was astonishing. She once swatted a half-in. diameter steel bar aside with one hand, bending it as if it were a coat hanger. I had to use a sledgehammer to duplicate the feat. That's not to detract from the heroic rescue, but it certainly didn't require the aid of an invisible magician
- Q: I want to lift the car about 1.5 all around without losing ride comfort.
- Probably, but you wont get any more than that, what kind of car?
- Q: how a hydraulic lift works when it lifts a car up in the air?
- There is a cylinder in the floor with a pipe going to a pump and a reservoir. The pump compresses oil and pushes it into the cylinder which is 1 ft in diameter. The area of the bottom of the cylinder post is about 113 sq in. (Pi* R^2) If the pump pressurizes the oil to 100 psi it can lift 11,300 pounds. Your car only weighs about 5000 pounds fully loaded so the lift can easily lift it. when they let the oil go back to the reservoir the car comes down.
- Q: hubby wants a car lift - lol - cant afford one - i have about 400.00 to work with - i need something that he can use to get the car off the ground about 2 feet - any ideas??? plz hurry - his 40th bday is in a week!
- Hello, okorder okorder / Anyway, I think ramps will be your best bet but you will probably have to utilize a combination of a ramp system, wheel cribs or jack stands, or a bit of them all. Personally, the wheel crib and wheel block setups are what I prefer instead of jack stands as I have seen jack stands fail (very scary and dangerous when that happens obviously). I hope this helps!
- Q: I have been dying to put a lift on my 99 jeep grand cherokee and was wondering what the basics of lift/suspension kits were.basically, a run down in everything you need to know to lift your suv/truck
- Suspension lifts They are designed to be a complete suspension replacement. Many kits include new front and rear coil springs, new shocks, front and rear lower control arms, front and rear upper control arms, cross-member front and rear adjustable track bars, front and rear brake lines, front and rear bump stops, rear shock relocation mounts, front sway bar disconnects, rear sway bar links, front track bar drop bracket, rear track bar bracket, and a drop pitman arm. Parts and labor not including tires and wheels around $2500.00 dollars
- Q: when he lifts like say a car wouldnt it rip that bionic arm off?
- Steve Austin was fitted with the highest bionic technology of the day. Keep in mind $6mil in the mid 1970s was probably the same as $30-$40 mil today. His bionics were designed to make him better, stronger, faster. So when they designed his bionics, I'm sure that they took things like that into consideration.
Send your message to us
Auto Lift/Scissor Car Lift/3T 4T 5T Model
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 20000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
