Mechanical Scissor Lift

Hot Products

Power Stacker CL series CL1212 CL1217 CL1226 CL1232 CL1032

CMAX Manul Scissor Lift from 300kg to 1000kg

STACKER PRODUCT SERIE - Hand Platform Stacker

Self propelled access platform--HR21

Power Stacker--CLF series CLF1016 CLF1025 CLF1030

Power Stacker-RSP13 ZAPL controller Ride-on design

STACKER PRODUCT SERIE - Hand stacker - - MS - E 1016

15M Trailer mounted platforms

Stationary Scissor Lift SJG3-7

Manual Scissor Lift

FAQ

Is the elevator moving faster or slower?

Lifting platform should comply with the law of the People's Republic of China machinery industry standard JB/T9229.1, JB/T9229.2, JB/T9229.3, lifting platform in general can be divided into fixed lifting platform, mobile lifting platform, self-propelled lift platform, lift car. Working environment temperature 15 + 40 ℃, general requirements workbench rising velocity should be 6-9 m/min, falling speed should be not more than 6 m/min. Lifting platform type different calculation slightly different;

How to maintain the platform?

My company has, our brand: niu power Throughout guangdong, there are 57 dealers across the country. Check it online, it's ok to buy it, but at least it will give you advice and contrast!

Operation and attention of electric elevating platform car?

Non-professional personnel shall not adjust the overflow valve, the hydraulic system of each component is within the prescribed work under pressure, adjust the overflow valve, may lead to abnormal operation of hydraulic system. There are unnecessary injuries to people, machines and objects; Before any part of the hydraulic system, the pressure oil should be discharged before the pressure oil gusts out. E, the corresponding moving parts shall add some lubricating oil to extend the life of the bearing. F, check the oil and oil position of hydraulic oil. The platform rises all the way. In this position, the hydraulic oil should be 40-50mm above the bottom of the box. If the hydraulic press is dark, sticky or gravel, it is found that 120 # hydraulic oil should be replaced in time.

How to use the elevator to be safer and more efficient

Constantly check the operation of the various agencies is normal, have no noise, if find fault, the elevator must be eliminated in time. 2, check the connection of the ministries, such as loose should be tight. When the compression of the connecting bolts should be in body check firmness, slightly shaft must have a split pin all connections, and to open fully. Always check all electrical wires and cables for damage. Make sure to cover and replace damaged parts in time. When the motor is overheat, stop the engine in time, and then keep running after the failure. The motor bearing lubrication is good.

How do you remove the horizontal universal elevator milling cutter

Tie rod and the threaded part of the milling cutter is too short, removing cutter bar back a loose, threaded connections even fewer number of buttons, easily when tapping threads dozen hair, and make the cutter not screw down, or make the damage of tie rod.

What can be done when the hydraulic platform is down?

Your reason is simple: the oil always goes to the small oil tank, causing the load to be light first, and the cylinder is out of sync. The solution in the economy is to buy a synchronous shunt valve for the oil supply of two cylinders. In the transfer valve A or B, one is solved

Safety operation of hydraulic platform

The driver shall be responsible for monitoring the distribution of the goods on the platform as uniformly as possible to prevent partial load and to prevent overload operation. The platform does not allow people to carry dangerous goods, such as inflammable and explosive devices, and to ban people from climbing as they rise, as well as artificial shaking. Drivers in the platform are strictly forbidden to leave their posts and to wipe, lubricate or repair the platform. When the work is finished, the driver should cut off the power supply and lock the control panel to leave the job and fill in the record of the transfer. 31 malfunctions, platform, or lose the normal work, should immediately notify the maintenance personnel to repair, if found to have dangerous or may cause personal mechanical accident, should immediately stop using, the total power cut off room and report to management department, just can use after repair and check in detail.

The hydraulic platform is compared with the normal lift platform

Light weight, good maneuverability, suitable for one-man operation. The special mast strap-roller device, which is stable and stable.