Product Description:
Features：
The scissors mechanical lifting structure is used to ensure high stability when the platform is lifted up.
wide work platform and high bearing capacity enlarge the aloft work area and ensure sevral people work at
the same time.in this way，it improves the efficiency of aerial work and guarantees the safefy.The power
source can be：AC 380V （custom configuration），AC 220V，DC，manual hydraulic power,manual-electric power.
Code | GTJY-6 | GTJY-8 | GTJY-10 | GTJY-12 |
Platform height（m） | 6.10m | 7.92m | 9.75m | 11.75m |
Work height（m） | 8.10m | 9.92m | 11.75m | 13.75m |
Platform size（m） | 2.20m x 1.00m | 2.25m x 1.00m | 2.25m x 1.00m | 2.25m x 1.00m |
Guardrail height（m） | 1.10m | 1.10m | 1.10m | 1.10m |
Storage size（LxWxH） | 2.45m x 1.20m x 1.75m | 2.50m x 1.20 m x 1.80m | 2.50m x 1.20m x 1.85m | 2. 50m x 1.20m x 1.85m |
Unfolding size | 2.25m x 1.70m | 2.30m x 1.85m | 2.38m x 2.00 | 2.45m x 2.15m |
Function |
Carrying capacity | 450kg | 400kg | 350kg | 350kg |
Raised/drop speeds（m/s） | 0.25m/s | 0.25m/s | 0.25m/s | 0.25m/s |
Machine weight（kg） | 1250kg | 1500kg | 1850kg | 2150kg |
Tyre（solid&no mark） | 10寸 |
Walk | Human pulling |
Motivity |
Motivity source（battery） | 2.2kw 220v/AC | 2.2kw 380/ac | 2.2kw 24v/DC |
Hyraulic pressute system capacity（L） | 15-20L |
Also can choose driving wheel （will charge plus） |
Total machine length will be increased 0.38m，total machine weight will be increased 200kgs after match with driving wheel. |
- Q:Where do the elevator motors go?
- Abstract: the shear fork type electric elevator is a special equipment for high altitude operation. The it scissor mechanical structure, make the lifting platform lifting Has high stability, wide operating platform and high bearing capacity, make the work high above the range is bigger, and is suitable for many people work at the same time. It makes high-altitude work more efficient and safer. It is a special equipment for high-altitude operation. Characteristics: the lifting mechanism adopts high strength manganese steel. There is a safety protection device that prevents the elevator from overloading. Safety valve shall be set up to prevent rupture of hydraulic pipe. An emergency reduction device with a power failure. The product is suitable for high-altitude equipment installation, maintenance, etc. According to different requirements can choose different dynamic form (such as: three-phase ac power supply, single-phase ac power supply, dc power and diesel power, etc.), and with manual hydraulic equipment, can be in a power outage or lifting work as usual, no power supply and can add adjustable platform, can extend to the desired location on the length of the platform, so as to improve the work efficiency. It is the ideal of modern high building and equipment, which is necessary for the production of high-altitude safe civilization.
- Q:When the hydraulic platform drops, it feels very shaken and unbalanced. Please answer?
- When you're completely down you don't have any oil pressure 【 full fall and then can't operation, full blocked ah 】 after turn off the motor Oil pressure is lifting the audience chamber pressure in gravity Driving hang on Don't let the weight of it Electricity pen again under pressure relief valve core inferior vena no pressure The cylinder is not the same as the cylinder, but the circuit is directly in the gas path
- Q:How to use the elevator to be safer and more efficient
- Annual maintenance Check all hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. Remove the hydraulic oil, remove the oil strainer and remove the oil strainer, clean it up and then put it back in the tank. Be familiar with 'ten notices' 1, pay attention to the agencies should regularly check and adjust the brake of the brake and the clearance between the brake wheel, flexible and reliable. The clean surface, there should be no dirt, in case of dirt must wash with gasoline or thinners. 2, pay attention to removing the hydraulic tank of fuel cap, remove the cap around earth, unscrew the cap, remove residual impurities in the joint area (not rinse in order to avoid water seeping into the tank), confirmed to open the cap. 3, pay attention to the elevator remove the hydraulic tank of fuel cap, filter cover, test hole, hydraulic tubing parts, cause the system oil when exposed to avoid dust, remove the parts to open completely clear before first.
- Q:What is the price of the hydraulic platform
- Mobile I have dozens of it are common, such as 0.3 T - 0.5 T - 3 M price about 15000 yuan 3 M is 18000 yuan 1 T - 4.5 M is 21000 yuan price basic like this, look at your own ability to discount.
- Q:What is the main shaft of the horizontal milling machine
- The main shaft variable speed has the impulsion device, facilitates the speed change, the machine tool can brake quickly and effectively. 4, machine tool of important transmission parts are made of alloy steel, easy to wear and tear of the parts are made of wear-resisting material, guide model, and the service life of the machine to have enough.
- Q:The tomb raider was not able to pry the gear in order
- When I play this card for a long time, also I am getting rid of the four is only the past, the front three gear easy to find, the fourth in 3, 4 layer between the right of the lift, there is a hole, was blocked by a few boards, you can go out from there the fourth also make it
- Q:How to use the ball screw platform?
- A, before use, should read the instruction manual, elevator are pass strict inspection before they go out and debugging, the various technical indicators have reached the requirements of design, thus reading takes the manual carefully before using, strictly follow the steps.
- Q:How does a button in the PLC control the elevating platform
- Click on the rise to the top, and then the bottom? This can be used to refer to a button that controls an electric motor The elevating platform must have the upper and lower limit, and can not stop in the middle. Not safe.
- Q:Seven tons of lift should be fitted with the straight screw and motor
- Can be judged according to the accuracy requirement of lead screw grinding or rolling, depending on the load and its acceleration can choose servo power right away and screw the maximum load capacity (do longer engineers can intuitive judgment the diameter of the screw and large), so that you can around the power of the servo motor of the different speed and different lead screw to match, so there will be several different schemes: high speed servo motor with small lead screw (sometimes deceleration machine), big inertia servo with lead screw. Under the condition of the machine cost to determine, from two to three scheme choice, choice of method is to choose low cost, with high stability, cost effectiveness and cost are the same common and suppliers have a spot. If the single from choose the ways of the servo and screw usually have an intuition, like 3000 revolutions of servo goods on the market the most sufficient, screw is according to the supplier's inventory.
- Q:What are the elevating institutions
- Four-wheel mobile elevators and two rounds of traction elevator, car modification lift, storage battery lift, self-propelled elevator, lifting height range from 4 m to 18 m
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
