Reinforced Concrete With Frp Bars

Hot Products

FAQ

Who knows, how is the glass reinforced septic tank connected with the municipal pipe?
Septic tank (Hu, F, NCH) is the treatment of nightsoil and to filter precipitation equipment. The principle is that the cured material decomposes at the bottom of the tank, and the upper hydration object flows into the pipeline to prevent the pipe from clogging and has enough time to hydrolyze the solidified object (such as excrement and urine). Tank (septic) refers to the division of living sewage sludge, and anaerobic digestion of sludge structure of small structures.
Winding method of glass fibre reinforced plastic pipeline anticorrosive glass fiber cloth
When the length and width of glass fiber mesh are not enough, the method of lap joint must be adopted to improve the tangential bearing capacity of the joint, so as to effectively overcome the radial tensile stress, bending force and bending shear stress. The lap length of the glass fiber cloth at the joint is generally 50 to 100mm, and the joint of each glass fiber cloth should be at a certain distance from the adjacent joint. The longitudinal and transverse joints between adjacent layers shall be greater than 300mm, and the distance from the same seam shall not be less than 500mm.5) paste made of circular duct, glass cloth along the radial 45 degree angle to the direction of cut cloth; conical paste products, according to the fan-shaped cloth.
Where are the advantages of FRP pipes? Long life?
Corrosion resistant and pollution-freeFRP pipes are resistant to acids, alkalis, salts, seawater, untreated sewage, corrosive soil or groundwater, and the erosion of numerous chemical fluids. Glass steel pipe props are non-toxic, stainless, tasteless, water quality without two pollution, and no need for anti-corrosion good features, therefore, in the water supply and drainage industry has been widely used.
How can I make up the broken glass fiber?
If the glass fiber reinforced plastic pipe is broken, how do you fix it and repair it better?. It's better to replace it. I wonder how much pressure you use for fiberglass pipes. The proposal is to replace the pipeline.
Slurry circulation glass fiber reinforced plastic pipe
The slurry circulation FRP pipe project has long service life and is safe and reliable. The pipeline is durable and the safety factor is above 6. The pipeline life can reach up to 50 - 100 years. For example, the water supply pipeline from Shenzhen to Hongkong was built on the side of Hongkong, long 50KM, respectively, two kinds of glass pipes with inner diameter, 2.2m and 1.7m, which were installed and used so far in 1965, and they were left intact.
Is it possible to touch the water when the glass fiber reinforced plastic pipe is polished?
Because the resin curing mechanism of FRP products is resin, resin agent, resin curing agent together to react, and release a lot of heat, this process does not affect the curing process because of a small amount of water and at the same time, if you have a little bit of water molecules would because of the large amount of heat emitted by evaporate, so does not affect the bonding of glass and steel that will not affect the glass steel pipe interface
Would like to ask about the plastic lined steel pipe, steel pipe, glass steel skeleton, the advantages and disadvantages of each ceramic pipe, to know a friend told, very grateful!
Plastic lined steel pipe of strong corrosion resistance, heavy quality, need to be made, on-site installation, if the size deviation cannot be installed. The price is more than 5 times more expensive than that of FRP
How to install FRP pipe correctly
And glass fiber reinforced plastic parts (three, elbow, etc.) in general, the best way is on-site bonding, quality stability and convenience.