Fiberglass Insulation Malaysia

Hot Products

Supply The metal wiredrawing plastic profile

glass steel sewage pipe

PVC UPVC Profile , Window and Door Frame Manufcaturer

PVC and Plastic Profile ,Window and Door Frame Factory

Double color coextrusion profile for window frame

PVC UPVC Profile and Window and Door Frame Factory

Plastic Profile and Window and Door Frame Factory with HIgh Quality

Glass steel water supply pipeline

Fiberglass pipe insulation

FRP grating, grating cover

FAQ

Fence material outside the plastic inside is iron or steel this material called

Generally refers to steel profiles. Plastic profiles are used for the production of doors and windows with PVC profiles, as early as the late 1950s has been in Germany, China began in 1983 from the beginning of the 20th century, the late 90s began universal application. Because simply use PVC profiles processing doors and windows strength is not enough, usually in the cavity to add steel to enhance the stability of doors and windows, so the profile of the steel interior made of plastic doors and windows are often called steel doors and windows. With the extensive use of steel doors and windows, PVC profiles for the production of steel doors and windows are commonly known as steel profiles.

Will the model of steel profiles (such as 88-type extrusion profiles, 80 extrusion profiles) is based on what to develop ah

Press the bottom width. Plastic steel profiles are made of polyvinyl chloride (PVC) resin as the main raw material, plus a certain proportion of stabilizers, colorants, fillers, UV absorbers, etc., by extrusion of the profile. Ordinary steel profiles will be deformed, the color is relatively monotonous, usually white, if you want to change the color will add PVC with the film, a long time the PVC film will fade.

Plastic steel profiles how to open the mouth of the best illustration and the formula there are cross-port V to answer to a comprehensive ah

Plastic profile V-head saw is mainly used for steel-type 90-degree V-mouth cutting, the internal equipment by the two motors, two pieces of blade. Start the V saw when the two motors at the same time driving into a 90 degree saw blade, the steel profile cutting a 90 degree V port. Saw the saw speed, saw no burr, smooth surface. easy to use. The equipment is running smoothly. High precision. The depth of the V-shaped steel profile is half of the large surface height of the stitch (welding flux).

What is the amount of plastic profiles

Plastic window frame and sash with lap way to seal, fan and the box part of the overlap called the amount of overlap. The industry standard does not specify the amount of lap. For the flat window, lap is generally between 8 ~ 10mm. If the conditions permit, the amount of lap as much as possible to choose a larger, so that in the installation and use, even if the frame fan overlap position slightly dislocation, but also to ensure that the seal between the frame fan. Using different hardware, but also affect the amount of overlap factors. If the use of ordinary handle, frame fan lap can choose a larger, if the use of transmission handle, frame between the need for a certain gap between the installation of the drive, so the amount of lap would have to be smaller, otherwise, installed on the fan Of the transmission is easy to touch the window frame, affecting the sash switch. Therefore, even with the same profile, the lap should also be determined separately.

Steel windows and aluminum windows compare which is more expensive

Lighting performance: Plastic window window lighting performance than the aluminum window difference, the block of a single component shading area than the aluminum window about 10%, vision and decorative effect is poor, is not conducive to building energy saving.

How plastic embossed profiles are made

Preheat To improve the processing performance of the molding compound and shorten the molding cycle, etc., the molding of the molding material before the first heating operation.

It is good for aluminum alloy

It is also good for aluminum alloy. The strength of the aluminum alloy is three times the strength of plastic, wind pressure strength than plastic two high. Aluminum alloy frame cross-sectional area of only steel 1/3, window frame weight is much lighter. Plastic doors and windows due to the strength of the material and low steel, although the steel lining by adding enhanced, but its wind pressure and watertight performance than the aluminum alloy window two levels. Just because the plastic window steel lining is not in its profile lap angle to connect the complete frame system, window frame, fan four corners and the T-shaped plastic angle of penetration is relatively low, so the high-rise buildings should be used with caution.

What is the material of steel

Plastic steel profile referred to as steel, the main chemical composition is PVC, it is also called PVC profiles. Is widely used as a new type of building materials, because of its physical properties such as rigidity, flexibility, corrosion resistance, excellent anti-aging properties, is usually used as copper, zinc, aluminum and other non-ferrous metals excellent substitutes.