PVC Profile and Window and Door Frame and Plastic Frame Factory

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
10 m.t
Supply Capability:
100 m.t/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

Product Description for PVC UPVC Profile

  

 

A casement window is hinged at the side and opens outward. It provides excellent ventilation,at times literally reaching out and catching the breeze. It looks like a narrow picture window because, unlike double hung or sliding windows, it has no rail to obstruct the view.

 

Some casement windows are simply pushed open, but most have a hand crank. Screens are placed on the inside of the window, where they're more protected from the elements. If you're installing windows over a sink, countertop or appliance, a casement window with a crank can be the perfect solution.

 

One of the things to look for in a casement window is how far it opens. The best open up perfectly perpendicular to the house for maximum ventilation

They are opened with a cranklever, or cam handle, which is placed around hand height or at the bottom and serves as a window lock.

A crank, stay, or friction hinge is necessary when the window opens outward, to hold the window in position despite wind.

Often the glass panes are set in a rabbeted frame and sealed with beveled putty or glazing compound to secure the glass.

 

 

 

 

 

 

 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Specification for steel profiles
At present, the smallest domestic steel profile section for the 60 series, a screw-connected window called steel-plastic composite doors and windows,
Q:Is the powder produced when the crushed plastic is crushed?
1, plastic shredders and power units to be installed firmly. If you need plastic crusher long-term fixed operation, it should be fixed on the basis of cement; if you need plastic crusher flow operation, the unit should be installed in the angle made of iron on the base, and to ensure that the power machine (diesel or motor) and plastic The pulley groove of the crusher is in the same plane of rotation. 2, after the installation of plastic crusher to check the Department of fasteners fastening, if loose to be given to tighten. Also check the belt tightness is appropriate. 3, plastic shredder before starting, first hand rotation of the rotor, check the claws, hammer and rotor operation is flexible and reliable, broken room with or without collision phenomenon, whether the direction of rotation of the rotor and arrows in the same direction, Plastic crusher lubrication is good. 4, do not casually replace the pulley, to prevent the speed is too high to cause the explosion chamber explosion, or too low speed affect the efficiency of the pulverizer. 5, plastic shredder should be maintained after the first start idle 2 ~ 3min, no abnormal phenomenon after feeding work. 6, the work should always pay attention to the operation of the plastic crusher, first of all, to be uniform to prevent the blockage of waste room; Second, do not work for a long time overload. If you find a vibration, noise, bearing and body temperature is too high, such as spraying out of the phenomenon, should immediately stop checking, troubleshooting can continue to work.
Q:The development of steel profiles
China's steel production capacity has reached 5 million tons / year. Most manufacturers can not fully play the capacity, there is a serious overproduction and homogenization of competition. China's steel profiles common national standard is GB / 8814-2004, access to national inspection-free enterprises are also referred to this standard production. Different from Europe and the United States, China's single type of profiles, the market is the bulk of the 60MM Pingkai doors and windows series of profiles and 80MM push-pull series of doors and windows profiles. The above two specifications account for more than 80% of the total consumption.
Q:How to identify the installation of plastic or plastic
According to the characteristics of profiles, the profiles are roughly divided into European and American two. European doors and windows of its characteristics are: profile formulations still use the traditional lead salt heat stabilizer, a small number of countries and enterprises began to use environmentally friendly organic tin heat stabilizer; main section of the profile profile is generally designed for three or four main chamber, The total number of chambers to 6 to 8, wall thickness is generally 2.5 ~ 3.0mm. Doors and windows with fan-fan frame structure, fan section larger, with pulley, can be removed; built-in glass, dry mosaic; window open in the foreign under the hanging window-based, a small amount of sliding window.
Q:The state of high-rise residential building doors and windows materials are not allowed to use steel profiles are expressly provided?
The state of high-rise residential building doors and windows materials are not allowed to use steel profiles should be allowed. We are a lot of these are more than 20 layers of plastic steel `` also used.
Q:It is good for aluminum alloy
It is also good for aluminum alloy. The strength of the aluminum alloy is three times the strength of plastic, wind pressure strength than plastic two high. Aluminum alloy frame cross-sectional area of only steel 1/3, window frame weight is much lighter. Plastic doors and windows due to the strength of the material and low steel, although the steel lining by adding enhanced, but its wind pressure and watertight performance than the aluminum alloy window two levels. Just because the plastic window steel lining is not in its profile lap angle to connect the complete frame system, window frame, fan four corners and the T-shaped plastic angle of penetration is relatively low, so the high-rise buildings should be used with caution.
Q:How many meters of a conch plastic steel profile
You ask what is the use, to do is to open the window or push and pull, and generally 6 meters large amount of work can go to the factory to ask them how long pull
Q:China 's top ten brands of steel profiles in 2014
Vikavica plastic doors and windows are produced by the German company of Vicat plastics in Shanghai. In the eastern coastal provinces of China occupies a considerable market. Is one of the top ten brands of steel doors and windows in China. It is a foreign - funded enterprise. It is one of the large - scale steel - making windows and doors enterprises directly under the Ministry of Construction of the new world. Companies in China's northeast Liaoning Anshan, China's steel doors and windows is one of the top ten brands.
Q:What is the difference between plastic doors and windows and steel doors and windows?
According to the characteristics of profiles, the profiles are roughly divided into European and American two. European doors and windows of its characteristics are: profile formulations still use the traditional lead salt heat stabilizer, a small number of countries and enterprises began to use environmentally friendly organic tin heat stabilizer; main section of the profile profile is generally designed for three or four main chamber, The total number of chambers to 6 to 8, wall thickness is generally 2.5 ~ 3.0mm. Doors and windows with fan-fan frame structure, fan section larger, with pulley, can be removed; built-in glass, dry mosaic; window open in the foreign under the hanging window-based, a small amount of sliding window. American doors and windows: the main formula for the use of environmentally friendly organic tin heat stabilizer, to avoid the production, processing, use of lead salt toxicity of the drawbacks; development for the multi-cavity section, the second is to reduce the profile wall thickness, 1.80mm; while increasing the number of internal reinforced steel and the chamber, the chamber generally have 9 to 13. In addition to reducing the strength of profiles, but also improve the thermal insulation and sound insulation effect. The sliding window for the frame package fan, improved the sealing and safety performance, cancel the fan pulley, reduce the fan section at the same time, the window lighting performance has been improved. Developed a standard installation method for pulling windows and new mounting wings.
Q:Fence material outside the plastic inside is iron or steel this material called
Ordinary steel profiles will be deformed, the color is relatively monotonous, usually white, if you want to change the color will add PVC with the film, a long time the PVC film will fade. Automotive supplies industry in the use of steel, the material requirements are relatively high, the most typical is the engine chassis protection board, has been widely used by most riders. Plastic steel is also used in the production of tapered roller bearing cage. Plastic cage has: 1, reduce the friction and roller slip, reduce the working temperature; 2, improve safety and performance; 3, fail safe mode, not stuck.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range