Resin C9 Petroleum Hydroleum for Adhesives and Ink
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1 Structure of Petroleum Resin Description
It is aromatic hydrocarbon resin, light yellow granular, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity.
2 Main Features of the Petroleum Resin
Softning point from 90 to 140, Light Colour, Granule, Better Fluidity, Transparent, Low Smell, Excellent antiaging Property, Quick Drying, Good Smudge Resistance
3 Petroleum Resin Images
4 Petroleum Resin Specification
| C9 | INDEX |
| Color (in 50% Toluene) | from No 7 to No.18 |
| Soften Point (DC) | 80-90; 100+/-5; 110+/-5; 120+/-5; 130+/-5; over 130 |
| Acid value (mgKOH/g) | 0.5max |
| Iodine value (g I2/100g) | 60-120 |
| Ash value | 0.1% max. |
| PH value | 6-8 |
Usage of C9:
1. Coating production: Used in paint and reinforced latex coating, also applied in oil soluble coating.
2. Rubber treatment: Used as adhesion booster.
3. Adhesive production: Used in adhesive, especially for melting glue and pressure-sensitive glue.
4. Printing ink production: It can be dissolved in hydrocarbon resin, it owns high soft point and stable performance, so it can be used in ink.
5. Paper making industry: Used in paper sizing agent.
6. Other application; Used as oil field water treatment agent & slurry additives, pitch modified agent.
| C5 | Index |
| Color (in 50% Toluene) | No.4-5 |
| Soften Point (DC) | 80-90; 90-100; 100-110; 110-120 |
| Acid value (mg/KOH/g) | 0.5% max. |
| Iodine value (g I2/100g) | 20/120 |
| Ash value | 0.1% max. |
Usage of C5:
1. Road marking paint: It can improve on the brightness, bonding, water and weather-resistance and may perfection for the dispersing and drying of any pigments.
2. Rubber: It goes compatible with both natural and synthetic rubber and characterized as adhesive, softening and reinforcement, it functions as an ideal for manufacturing of tyres and processing of any rubbers.
3. Adhesive: It is compatible well with high polymerization based substances, and is characteristic of excellent and stable bonding and heat resistance and changes retardant with both time and temperature.
Other application: It is also widely used in fields of oil ink, paper bonding, sealant etc.
5 FAQ of Petroleum Resin
1) How to control the products’ quality?
We have always placed great emphasis on quality control to ensure that excellent quality level is maintained. Moreover, the principle we always maintain is "to provide customers with better quality, better price and better service".
2) Can you provide OEM service?
Yes, we work on OEM orders.
3) What information should I let you know if I want to get a quotation?
1, Type of the products
2, Color Number(if have)
3, package
4, Quantities
5, Please send us some pictures for checking if possible so we can do best as your request. Otherwise, we will recommend relevant products with details for your reference.
4) How many days will sample be finished and how we control the sample charge?
Samples will be sent within 5 working days after we are in receipt of the payment. The sample charge is free, but the charges of shipping will be paid by the customer. You can pay the shipping charges by telex transfer(T/T),Payeasy.
- Q: A warehouse with 40,000 square feet is filled with five products. The pie chart described below gives the space used by each product. How much warehouse space is taken up with lumber? Lumber 18.4%, Pipe Fittings 12.0%, Electrical 8.6%, Flooring at 25.2%, and Appliances 35.8%.
- Part adornment, part anti-plastic statement, these nickel- and lead-free cornstarch-resin-based bracelets by EverybodyGreen were designed to aid environmental non-profits, as well as raise public consciousness about eco-friendly alternatives. Strung on organic hemp cord and embellished with a Go Green charm made from recycled brass, the bracelets come in coordinating sets of three ($15), in color themes with names such as berries, crystal, ocean, and dusk.
- Q: I'm planning to use a pole saw for tree trimming. The safety instructions, which came with the saw, say to use heavy-duty rubber gloves for protection against vibrations and outdoor hazards. What specific outdoor hazards is the rubber intended to protect against? How thick does the rubber need to be?
- Sanding it will make it opaque. But you would be using sandpaper of finer and finer grit, and then use a polishing paste for resins and that would make it clear again. It's a lot of work though. I haven't tried how well some clear coat works on top of resin, but it could make the process easier. The problems with not seeing your object clear may also be related to the exact shape of your sides. If they are not flat but warped you wouldn't see it really clear either. If you look through glass which is really uneven (either old windowglass or glass from a jar) you are not going to be able to see through it very clearly either because light gets refracted a bit different if the glass has different thickness/curvature.
- Q: As far as lock washers, seals, gaskets?just basic parts, thank you
- aluminum pipe to hold the fuel. ceramic fiber blanket (used in wrapping car exhaust pipe). copper wires to wrap the whole system. (no glue)
- Q: So far I have just a helmet and some gloves, I've seen 2 bad wrecks in the past week, so I'm thinking I should problly get more stuff just incase, what would you guys recommend? Oh and one thing, I can't stand wearing tight clothes I get extremely clostraphobic, so keep that in mind, and is there armor I could buy to just wear under my clothes? If there is could you also recommend some brands to check out?
- The resin is a hell of a lot harder on your lungs and throat than clean pot smoke, so your body is going to react more. Lily, the plastic never gets hot enough to burn, so your point is moot.
- Q: Using unsaturated resin to make glass fiber reinforced plastic products, without adding accelerant, only curing agent, can I? What is the function of accelerant?
- The curing reaction of unsaturated polyester resin is free radical polymerization, and its curing agent is actually an initiator, usually organic peroxide.
- Q: Ok, so im moving to a house where there is NO outdoor hose hook-up. There is however, a big basin style sink in the basement. I have an intex pool that i want to set up there.. how could i fill it with the sink? Can i get a faucet adapter and hook a hose up to it somehow?? HELP! (
- Too many employees says everything they let you go to better the chances of the company's survival saying you're at fault may help with their unemployment account averages.
- Q: The neighbor hood I live in has an association that recently took it upon themselves to install speed bumps throughout the property. But they neglected to put up any signs stating that there are speed bumps ahead. I was wondering if this was in violation of any laws? People who ride motorcycles could be injured if they failed to see these speed bumps ahead. (which are black rubber with no reflective paint)
- The resin is never going to set unless it reaches at least 60-70 degrees F.That should assure the working time you need as it may run into several days or more.Once it finally does set it will harden normally.
- Q: i plan on getting snake bites soon and i was just wondering if the studs come in different sizeslike some of them look huge and i dont like that at all. i'd like them pretty small and neat , will that be possible right away or do i have to get bigger ones first?
- Some people are ok with this, I personally am not. My man threw away EVERYthing that had to do with any of his exes and gave me permission to do the same if I came across anything. However, I had another ex and he had a tote full of pictures and whatnot - which apparently HIS ex never had a problem with. I guess if he has never cheated on you and the fact that he was honest with you - maybe there is a compromise but really - now that you are married, what is the point in keeping it and would he be ok if you had stuff like that? A discussion should be had!
- Q: I have a 1969 house and the back side of the roof has a very flat pitch. I talked to a roofer that did his mom's house up the street, which is the same style as mine, and did rubber roof on the backside where it is less then the 2 inch rise/ft for shingles. I later read more on rubber roofing and I know that the petrolium in the asphalt shingles would destroy the epmd rubber if they touched but is there a proper way to make a seam at the roof cap to go from rubber on the flat backside to the cap and have asphalt front side?The roof is leaking in several places and did a lot with one bad snow storm that caused ice damming on the flat side. I was told a rubber roof would pretty much solve that problem. I have vaulted exposed beam ceilings with no attic and no insulation cavity so heat loss is excessive. I have also been searching for solutions to increase the R value of the roof. Right now all thats there is the birch on the inside, 2 inch buffalo board, then the shingles.
- -you can put polymer clay charms in your resin -try to not buy paper based stickers -I got mine for about $25 for 250 ml (both bottles) -you should buy some candy moulds -And you should mix your mixture really well and slowly to not form air bubbles. Push
- Q: My smoke detector in my hallway has been going off for NO reason. No smoke, no nothing. I'm sure its a smoke detector and not a carbon monoxide detector. Three weeks ago it started to go off, and then it stopped. Today it went off with a single beep. A few minutes later, it emitted three beeps, then one. It just goes off at random times and is annoying the crap out of me. Can anyone tell me the problem?
- The problem with making a perfect sphere is getting the resin into the mold and getting the result out. There either has to be a small opening to inject or pour the resin in, leaving a slight flat spot on the sphere or a tube like path through the mold, which result in a stem to be cut off and polished down. To really make perfect spheres with little or no ridge around the ball and little or no follow up work, you would have to have the holes machined in steel and provide a flush mechanism to push the balls out (or the mold off the balls) - holes in the mold to eject with air pressure would leave a little dimple. A sphere has parallel sides - no relief right at the equator - to the mold will want to hold on to it. With a silicone rubber mold it would be flexible enough to pull off the result and perhaps could be made by molding a glass marble and then cutting through the mold to the glass to get the two halves and make a nearly perfect seamless match. Making the usual half mold, keying it, putting separator on, and putting the other half mold material in place is more likely to make a seam line but is certainly less involved than getting steel machined to perfect half spheres.
Send your message to us
Resin C9 Petroleum Hydroleum for Adhesives and Ink
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
