Product Description:
Product description of unsaturated polyester resins
product code:UPR196,for general purpose hand lay-up usage;
UPR196 is a common unsaturated polyester resin with medium viscosity and high reactivity,applicable to the manufacture of common steel glass products, cooling columns, containers of dilute acid etc.
Specification of FRP Grating
1.Orthophthalic
2.General pupose resin
3.Good impregnation to glass fiber and mechanical property
Technical Indexes of Liquid Resin |
Item | Unit | Value | Standard |
Appearance | | Transparent Sticky Thick Liquid | Visual |
Acid Value | mgKOH/g | 16-22 | GB2895-82 |
Viscosity(25°C) | mPa.S | 380-620 | GB7193.1-87 |
Gel Time | min | 5-9 | GB7193.6-87 |
Non-Volatile | % | 62-68 | GB7193.3-87 |
Thermal Stabilityility | h | ≥24 | GB7193 .5-87 |
Images



Features
Performance Indexes of Resin Casting Substance |
ItemItem | Unit | Value | Standard |
Barcol hardness ≥ | Barcol | 38 | GB3854-1983 |
Tensile strength ≥ | MPa | 60 | GB2568-1995 |
Tensile modulus ≥ | MPa | 3000 | GB2568-1995 |
Elongation at break≥ | % | 3.0 | GB2568-1995 |
Flexural strength ≥ | MPa | 88 | GB2570-1995 |
Flexural modulus≥ | MPa | 3100 | GB2570-1995 |
Impact strength ≥ | KJ/m2 | 8.5 | GB2571-1995 |
H.D.T ≥ | °C | 73 | GB1634-1989 |
Note: Environmental Temperature for Experiment: 23±2°C; relative humidity: 50±5% |
FAQ:
1. Why Choose us?
CNBM is a stated own company, provide the guarantee for the best quality, best service and safety business.
2. How will we guarantee the quality?
a, ISO 9001-2008 quality control system;
b, Strict and regular quality control in production;
c, Inspeciation when loading into container before shippment;
d, Sample stock for one year for quality tracing and record.
- Q:I have just bought a 2000 Fiat Brava SX 80, but I was told by the dealer not to rely on the factory fitted alarm it comes with. I have seen several different kits you can buy on the internet that allow you to install a separate alarm, and I quite like the look of the ones that give the car remote central locking (I only have central locking, not remote).Does anybody know if these kits are actually worth it, how hard they are to fit, and any recommendations?Thanks!
- Hi, It's very easy to use a fire extinguisher. But the most important thing is to take care about this. But if you have any damaged extinguisher then you can sell it on halon.us. I think it will be helpful to you. Thank you.
- Q:What Catholic priest first harnessed eletricity for mankind through a lightning rod?
- go to a marine store, west marine, boaters world, whatever. ask for the manager, ask him if he or if he knows of an employee that has built a small boat because i guarantee it was finished with EPOXY RESIN and FIBERGLASS CLOTH. the price of the resin and cloth will pale with the amount of time you will put into building a sturdy boat that will now last you a life time. fiberglass is easy..(once you learn the basics) go to youtube and watch people doing fiberglass work. once it's on and lightly sanded and varnished it looks like bare varnished wood.
- Q:People drive too fast in my neighborhood and I'm concerned for the children's
- First, P.S. The word mold especially when referring to resin, clays, various liquids/gels, etc, means a negative 3-D shape into which a material is cast. The hardened cast resin/clay/etc is then removed and used alone. Otoh, the verb to mold something in general parlance can just mean to shape it, but in art/etc it usually means either making a mold or casting in a mold. **You could use that but has disadvantages. .
- Q:Team Rhode Scholars faced team hell no to many times.Ambrose said:It's about right and wrong. The wwe champion cm punk had to defend his championship agianst 2 guys he already defeated.That's wrong. Then we stepped in, if it happened to ryback or cena we would have done the same thing.if ryback was champion for 365 days and punk try to ruin ryback party we would have defended we would have been on rybacks behalf.Being champion that long in this era, that's a huge milestone that should be celebrated right?Is the shield working for punk?Is Team Hell No innocent?
- the US is not after pakistan. we've had an on again off again relationship with them in our campaign against terror. we actually end BILLIONS of dollars over to pakistan in order to aid their government and humanitarian efforts. having said that, there is a lot to worry about with them the pakistani government does not have much control outside of islamabad. moreover, pakistan is a nuclear power, so, if islamabad were to fall, al-qaida would have access to nuclear weapons, which, i'm sure you'd agree, is BAD the US is not accusing pakistan of harboring OBL, but at the same time, it is suspicious that Osama was able to live in such an extravagant manor in one of Pakistan's most populated cities without notice from the pakistani government. there may be a logical explanation as to why that is, but the US is entitled to hear it. this was a MAJOR lapse of oversight on the pakistani part.
- Q:Are the suits that firefighters wear fire resist?
- click on the subcategory in list at top of page (about 2/3 of the way down) called IN PERMANENT CELLS to at least see some suppliers for pendant trays, cabachon settings, etc, etc. My Jewelry page (under J in the alphabetical nav. bar) should also have links for regular online jewlery suppliers like Fire Mountain Gems, etc. HTH, Diane B.
- Q:Any tips would help thanks! )
- A composite resin veneer is like a porcelain veneer but a tooth shaded bonded composite filling material is formed, hardened, shaped, and then polished over the tooth . It is done in one appointment and is about 1/3 the cost of porcelain veneers. However they lack the strength and resistance to staining that porcelain does. So the result is that their life expectancy is not as long and they will have to be re done more often.
- Q:You see a firefighter aim a fire hose from 4ft above the ground at a window that is 26 feet above the ground. The equation h-0.01d+1.06d+4 models the path of the water when h equals height in feet. Estimate, to the nearest whole number, the possible horizontal distances d (in feet) between the firefighter and the building.
- buy a bigger car or park where there are no speed bumps or stop complaining
- Q:What kind of material is the resin made of?
- Resin classification:1, according to resin synthesis reaction classificationAccording to this method, resins can be divided into polymers and condensation polymers. Polymers are polymers made by addition polymerization, and their chain structures are chemically identical to those of monomers, such as polyethylene, polystyrene, and polytetrafluoroethylene.Condensation polymer is a polymer prepared by condensation polymerization. Its structural unit is chemically different from that of monomer, such as phenolic resin, polyester resin, polyamide resin and so on.2, according to resin molecular backbone composition classificationAccording to this method, resins can be classified into carbon chain polymers, hetero chain polymers, and elemental organic polymers.A carbon chain polymer is a polymer composed of carbon atoms of the backbone, such as polyethylene, polystyrene, etc..A chain polymer is a polymer consisting of atoms of two or more elements, such as carbon, oxygen, nitrogen, sulfur, etc., such as POM, polyamide, polysulfone and polyether. Organic polymer refers to the main chain does not necessarily contain carbon atoms, mainly by silicon, oxygen, aluminum, titanium, boron, sulfur, phosphorus and other elements of the atoms, such as organic silicon.
- Q:How do you fix a bad day (or at least make it better)?
- Have fun! (Trust Rio Grande's products, they're the best jewelry supply site!)
- Q:EVA material is plastic or rubber?
- EVA resin is a copolymer of ethylene vinyl acetate, ethylene vinyl acetate (VA) content in 5% ~ 40%. compared with polyethylene, EVA in molecular chain was introduced in vinyl acetate monomer, thereby reducing the high crystallinity, improved flexibility, impact resistance, filler compatibility and heat sealing performance, is widely used in the foaming shoes material, functional films, packaging film, hot melt adhesive, wire and cable and toys and other fields.
1. Manufacturer Overview |
Location |
|
Year Established |
|
Annual Output Value |
|
Main Markets |
|
Company Certifications |
|
2. Manufacturer Certificates |
a) Certification Name |
|
Range |
|
Reference |
|
Validity Period |
|
3. Manufacturer Capability |
a)Trade Capacity |
|
Nearest Port |
|
Export Percentage |
|
No.of Employees in Trade Department |
|
Language Spoken: |
|
b)Factory Information |
|
Factory Size: |
|
No. of Production Lines |
|
Contract Manufacturing |
|
Product Price Range |
|