Stainless Steel Strainers

Hot Products

Cast Iron Gate Valve Standard or Nonstandard: Standard Structure: Gate Pressure: Medium

Cast Iron Gate Valve 15--60days Standard Structure: Gate Pressure: Medium

GATE VALVE AWWA/ ANSI NON-RISING STEM RESILIENT SEATED DUCTILE IRON

Cast Iron Gate Face to Face Dimensions:DIN3202F5 Structure: Gate Pressure: Medium

GATE VALVE SOCKET ENDS NON-RISING STEM RESILIENT SEATED DUCTILE IRON DN50 - DN300

Cast Iron Gate vPackaging & Delivery Standard Structure: Gate Pressure: Medium

globe valve ； CLASS150--900 gate valve ;

GATE VALVE KNIFE DUCTILE IRON DN50-DN2000

Cast Iron Gate Valve Resilient Seated Flanged Gate Valve Structure: Gate Pressure: Medium

cast iron gate valve wooden box outside Standard Structure: Gate Pressure: Medium

FAQ

What is the difference between gate valve Z41T and Z45T?

Z41T is a dark pole gate valve, and Z45T is a plain rod gate valve,

What are the working principles of the electric gate valve?

You see what type of electric valve, is integral or ordinary type, if the overall type Denso took power on the line, is generally 380V and 220V power supply, and then according to their own needs and then open the signal line, in place and closing in place and remote control line, valve position feedback signal 4~20ma over torque protection, fault signal. Ordinary type electric valve should be equipped with the control box, the motor is the true story and the inversion, and in general to a trip signal signal is normally open and normally closed, closed in place are normally open and normally closed two points according to their own needs wiring, three lines and then open and close control of the line of control there are also 4 lines to control some manufacturers, as well as the valve position, some three lines connected with the potentiometer, some installed valve position transmitter is connected with two lines, and over torque protection fault signal.

Function of gate valve

Valve strengths: (1) fluid resistance is small, due to the valve inside the valve channel is straight, and the medium flow through the valve does not change its direction of movement, so the fluid resistance is small. (2) the opening and closing moment is small, opening and closing more effort, as the gate valve opening and closing, the direction of movement of the gate and the direction of the media movement vertical, compared with the cut-off valve, valve opening and closing more effort. (3) the direction of the movement of the media is not limited, no disturbance, no pressure reduction, the media can flow in any direction from both sides of the gate valve, and all can achieve the purpose of use, more suitable for the direction of the movement of the medium may change in the pipeline. (4) the length of the structure is relatively short, because the gate of the gate valve is vertical inside the valve body, and the stop valve clack is horizontally placed in the valve body, so the length of the valve is shorter than the cut-off valve. (5) the sealing function is good, when the full opening, the sealing surface is less eroded. (6) when fully open, the sealing surface is less eroded by the working medium than the cut-off valve. (7) the shape is relatively simple, the forging technology is good, and the scope of application is wide.

What is the difference between a flanged gate valve and a wire gate valve?

Flanged gate valves are flanged and must be welded to the flanges of the pipe, bolted together

Yes, soft sealing gate valve can reach 25 kilograms, Fujian light valve company has this type of soft sealing gate valveAnonymous browsing | 28 times

Soft seal butterfly valve seal is good, but can only withstand up to 16 pressure, or the plastic can not stand. A short period of time is OK, and it's also related to the workmanship and quality of the factory. The quality is poor.

Why? God, can you explain to me in detail why?

Pump outlet, check valve, gate valve.Gate valve plays a regulatory role, is the main pipe. Such a sequence can ensure that the water flow during power failure does not cause damage to the gate valve.

What kind of valve is gate valve? Is it different from the cut-off valve?

Gate valve and the role of the cut-off valve, are playing a role in isolation. The difference is that the gate valve and the cut-off valve are constructed differently. Fluid from the gate valve flow and flow direction is straight, there is no change in direction, but in the cut-off valve is from the bottom of the valve flow into the flow from the upper part of the spool.

What does gate z41t-10 150 mean?

According to JB/T308-2004 "valve type programming method"Z gate valve4 flange connection1 Ming wedge single gateT sealing cover material is copper alloy10 nominal pressure PN10PN16 below no marked valve body code, body material is gray cast iron150 nominal size DN150