ZYC800 Hammer Pile Driver Hydraulic Static Pile Driver for Sale
Lower Energy Consumption:
>>We use variable hydraulic systems with low loss and constant power in this series of products, so that energy consumption decreases by 30% and working efficiency increase by 60%.
>>To ensure the high working efficiency of the whole machine, we use hydraulic systems with big power and great flow, the pile driving mechanism with multi-speed control and being quick in getting ready for operation.
>>To ensure the high reliability of our products which engineering machines should possess, we improve the design and use very reliable materials or components which we select carefully in the process of purchasing.
>>For example we use inverted cylinder as a supporting leg which has become a patent in our country so as to avoid the easy breakage of cylinder which was the case with traditional design.
Convenience in dismantling, transportation and maintenance:
>>Since we have constantly improved our design of pile drivers for more than 10 years, every part of the machine is easy to be taken apart, which provides convenience in transportation and maintenance.
>>Compared with the pile drivers made by other companies, ours are more convenient to be taken apart and shipped as the connection and lay out of the long boat and the short boat are different.
>>Take the driver's cab for example; it can be opened at the middle so that the lifting arm of the crane can pass through it during transportation. Besides, the side piling mechanism can be taken off so as to reduce the length of machine to be shipped and greatly reduce the weight of separated units in transportation.
>>Our products are multi-function static hydraulic pile drivers with embracing pile driving, top-pressing pile driving or both at the same time because they are well combined with each other.
>>Our products have bigger capacity of side piling and corner piling than those of other companies, and the power of side or corner piling reaches 60% of the middle piling.
>>Our pile drivers can work with a variety of piles, square piles or round piles or other shape of steel piles, no matter thin-walled round concrete piles or thick-walled ones.
Systemization and Maximization:
>>Our company has developed 14 models of pile drivers with the capacity of 60 tons to 1200 tons and each model is classified into 4 kinds according to its function with the maximum tonnage of 1200.
Flexibility in Designing:
>>To keep up with the development in the engineering machinery of the world, we will integrate all useful high technologies from machine-building, electricity, hydromechanics and electronics into our products and meet different individual needs of our customers.
>>For example, we can, if any customer requires, install a position-controller for the crane, and a digital screen showing the tonnage of piling force, etc.
>>The design of inverted cylinder as a supporting leg which avoids the radial force on the piston extends the life-time Of the cylinder.
The patent number is ZL01249443.7.
>>Embracing pile driving or top-pressing pile driving or both are used in operation with one machine.
The patent Number is ZL02139875.5.
|Rate piling pressure(KN)||8000|
|Corner piling space(mm)||2850|
|Pile hanging length(m)||15|
|Main dimension(m)||Work length||14.00|
1.Which payment terms can we accept?
Normally we can work on T/T term or L/C.If you choose T/T,30% payment is required in advance and 70% balance shall be settled before shipment often,it rang a little.
2.How long will our price be valid?
We are friendly dealer, never greedy windfall profit, our price remains stable,except the exchange rate and the increasing labor cost and material cost.
3.What are our advantages compared with manufacturers?
a.Detailed training-We can provide training services to different users. The training sessions include product training,operating training, maintenance know-how,standard and so on to fulfill your individual needs.The training can be conducted at client’s site.
b.Available after service-With our global distributor network, you are guaranteed with fast deliveries and services if you submit your requests.
- Q:What's the special use of a pile driver?
- Moreover, the torque of the hydraulic power head is 2-3 times as much as that of the ordinary three ring power head. It is more suitable for complex formation than the traditional long spiral, and the construction efficiency is more efficient. Long spiral drill in the type piling machine is the use of a more extensive, and for starting current understanding, we can get better in the construction layout, so as to avoid the occurrence of the voltage is not enough at the time of construction.
- Q:Pile foundation
- Sinking into the pile foundation - Hammer Sinking Pile into the pile, the main construction methods are: Hammer Sinking Pile, vibration pile, static pressure pile and immersed pipe pile. The hammer sinking pile is generally applicable to medium density sand soil and cohesive soil. Because the pile driving hammer will sink the pile and hit the pile against the impact energy of the pile hammer, so the general pile diameter can not be too large (not more than 0.6m), and the buried depth is not greater than 50m.
- Q:Requirements of waveform guardrail column piling skills training program and training program.
- B, anti blocking blocks, wave beam, end installation(a) after installing the upright column, the bracket (block block) can be installed. The bracket (stop block) is fixed between the wave beam and the upright post through the connecting bolt. The bracket (block) shall be adjusted to make it in place before tightening the connecting bolts.(b) the wave beam is spliced with each other by a splicing bolt and is fixed by a connecting bolt bracket (an anti blocking block), and the direction of the overlap of the roadbed guardrail and the corrugated beam is the key of the installation, and the installation is carried out in strict accordance with the drawing. The direction of overlap shall be consistent with the driving direction. The wave beam should be adjusted continuously during the installation. Therefore, the connecting bolts and the splicing bolts should not be tightened too early so that the long holes in the corrugated beam can be adjusted in time during the installation process so as to form a smooth alignment and avoid local irregularities. When the alignment of the guardrail is considered satisfactory, the bolt can be screwed at last. The connecting bolt between the bracket (stop block) and the wave beam should not be screwed too tight, so that the temperature stress can be adjusted by using a long round hole.(c) the end beam is spliced with standard section guard bars through splicing bolts. The construction method of the end beam is basically the same as that of the wave beam.
- Q:What kind of pile driver, rotary drilling machine can drill under medium weathering rock layer?
- The Xugong power head, wylong machinery mechanical lock rod rotary drilling rig Yuchai engine and can be weathered rock and sediment layer in the layer below, backfill soil drilling construction
- Q:Types of pile drivers
- The hammer into the exhaust valve reversing by manual control, can also be installed in the side with the hammer and hammer lifting flange lever automatic control, impact stroke two ways can adjust the hammer. Three diesel hammer body is made of cylinder and piston, similar to the working principle and the single cylinder two stroke diesel engine into the cylinder combustion under high temperature and high pressure atomized diesel combustion chamber by injection pressure generated by the detonation driven hammer working. According to the structural form of diesel hammer rod and cylinder type separation. The guide rod type diesel hammer is pressed on the pile cap with a plunger as a hammer seat, and the cylinder is used as a hammer head to move up and down along the two guide rods.
- Q:Principles of piling
- Because of the buildings on the ground if you want to build on the ground, the ground will bear great pressure, we must ensure that the ground has enough resistance to stress strength, it is often difficult to do, so we must reinforce or improve the ground under way on the ground to bear, so I think in the pile foundation, make the most of the weight of buildings to the position below ground deep through the pile foundation, because this position is much larger than the ground bearing capacity.As to how deep the pile should be, it depends on the distribution of the ground beneath the ground (technically called the geological structure layer). If it is enough to withstand the pressure of the building, the pile hits here, and if not, it must continue to deepen.
- Q:What kind of pile driver should be used for piling on the beach?
- There are many kinds of piling methods, and different pile drivers are chosen according to different waysIt is better to use a diesel hammer, a pile driver, or an immersed pipe filling pile on a beachThe pile can be operated or tracked
- Q:What is a car pile driver? I hear it's easy to use.
- Yeah, yeah. You're talking about wheels. I am now using a wheeled screw, not only easy to move, the speed is very fast, is a powerful brand of Shandong piling machine, also known as force pile driver.
- Q:How do I maintain the hydraulic pile driver I bought?
- Pay attention to the following: the type of project to be used;
- Q:Precast pile, artificial dig hole pile, sinking pipe filling pile, spiral drilling pouring pile and powder spraying pile.
- This needs to see you later there is no project, and later works can consider buying.Of course, a comparison can be made between purchase and lease before purchase.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range