Stainless Steel Sanitary Fitting Water Manifold DN50x3/4 304
- Loading Port:
- Huangpu
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
WELCOME to visit our stainless steel pipeline products here(^_^)
Press fitting system joins pipe without welding or bolting. The components fit by crimping through the use of a special pressing tool. An O-ring that is inserted in the fitting ends of the pipe ensures a leak-proof connection. Press fitting system is the trend of pipeline industry. It is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc.
For the size, now we have 3 series:
1. Out diameters: 16.0, 20.0, 25.4, 32.0, 40.0, 50.8, 63.5, 76.1, 88.9, 108.0 (GB/T 19228.2-2011)
2. Out diameters: 15.88, 22.22, 28.58, 34.0, 42.7, 48.6, 76.1, 88.9, 101.6 (JIS G3448-1980)
3. Out diameters: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108 (EN 10312:2002)
Technical information:
-- Material: Stainless steel 304 and 316L available.
-- Max working pressure 1.6MPa (equal to 232 psi), testing water pressure: 2.5MPa (equal to 362.5psi).
-- Working temperature from -20 to 110 degree centigrade (with Chlorinated butyl rubber O ring),
-- Suit medium: Cold water, hot water, compressed air, gas, oil etc
The product features as below:
1, thin wall stainless steel pipe could last for 70 years, it is the same life time with normal buildings.
2, no smell, no rusty.
3, recycle material
4, avoid welding, avoid fire dangerous.
Contact us for more details!
- Q:Beauty stuffClothingSafetyStuff for funanything! :]
- I would write ,lay face down in an old walmart plastic bag ,and fold it over several times,then place it in another walmart bag and tie the handles tight and toss in the garbage can.,,,,,,,,,,,,,,,,
- Q:Well here's da deal, I've done quite alot of research on this and i know that da XI2 is hands down best. but im a college student in north Dakota(were it snows and have ice like crazy!) i wana spend on this smartly. If i go with a set of generals im gona save like $130 but i want good traction too since i put a decent amount of time on the road and my car is lexus sc300 RWD (i know what u thinking but It's the only 1 i have and love it!). My concern is will a set of general STUDDABLES( altimax arctics without studs) will deliver what i want? i drive fast but since it started to snow couple of days ago im driving insanely slow and still i have problem since i have all season tires on it now. i want to drive in a decent pace in city and at least 70-80 on highway. Guys what do you think??? that extra $130 will be worth while spending to help my driving? or i can getaway with a set or cheap generals???
- If you don't already know the answer to this question, then you should not be breeding your dog. Get her Spayed. She will be happier and healthier in the long run. Don't add to all the dogs, that are being Euthanized in shelters everyday, because there are not enough homes to go around and adopt them all! Breeding should only be done by those who are breeding for the right reasons and who know what they are doing. You breeding your dog, would be putting her life at risk, because of the fact that you have no experience breeding.
- Q:When lightning strikes the ocean why don't all the fish die?
- cut out joint and replace with shark bitefittings.easy to install,they just slide on pipe.
- Q:I am planning on doing a science project that involves dry ice and the fog that it creates. Will the fog set off smoke alarms? (I can t find any clear answers)
- Maybe they lived in the Montana State University-Billings dorms for a while. The fire alarms would often go off at 3 in the morning on the worst days for weather out of the year, for reasons such as a pipe froze and dripped water on the control panel or a random glitch in the system. This would sometimes happen more than once in a night. It became nearly impossible to take the fire alarm seriously. Especially considering that in the probably 15 or more fire alarm soundings they experienced during the four years I was there, NONE of them were for an actual fire! The closest thing to an actual fire was some burnt toast in the cafeteria. No actual fire, just a thin cloud of smoke and a barely perceivable black circle on the ceiling. I can't say that I really take any fire alarm seriously after that. I take notice when I start seeing smoke.
- Q:I was shooting a film at school using a fog machine and the fire alarm went off. However I am not positive it was the fog machine that set it off because 2 janitors ran by the room and I heard that they thought it was smoke and pulled the alarm, I am not sure though. Anyways we told a teach after all 3 thousand students where out of the school that it was probably the fog machine. Anyways we talked to the principal about it and he said he would let us off because it was an accident and a teacher knew about it plus we told a teacher it was us. Well he said that the fire department might fine the school for the alarm going off without an actually emergency and the school would make my group pay it. The principle said once a student pulled the fire alarm before as a prank and had to pay $1000 for the fire department coming. Is this legal and would I have to pay this? Any input would be helpful
- Yes. That is why straps, clamps and clip designed to fasten copper piping are ''clad'' with a thin coat of copper.
- Q:In the Bible, does God ever strike down with lightning people who have lightning rods on their tents?
- I agree with danny of attacking it from the back side to avoid tiling versus drywall. If you do not have a soldering torch or you are not confident in trying to solder, go to any hardware store and ask for a product called Sharkbite fittings. they install by just pushing over the pipe. That's it. You can come out the other end of the sharkbite fitting with copper or cpvc. I use them all the time. They are the greatest thing out there. i prefer to use cpvc to come out of the sharkbite and because there is no soldering involved, and the cpvc pipe and fittings are cheaper then copper. If you do use the sharkbites it is critical to have a straight cut on the pipe, so invest in a small copper pipe cutter.
- Q:The third red wire on the harness used to interconnect fire alarms so that they all sound when one is activated. Can I use the Ground wire to interconnect the two?
- I was fixing Mobile Homes in Alaska and then got a job drafting, so i went from being cold to a nice warm office
- Q:Detailed point. I'd like to add some knowledge about it.
- The ends of the pipe shall be flush. The pipe should be flush in sawing grinding wheel and other tools, and burr cleaning and high pressure air blowing after use.When installing, the coaxiality of pipe and joint body should be kept as far as possible. If the pipe deflection is too large, it will cause sealing failure.The pre assembly force should not be too large. The inner blade of the clamping sleeve is just inserted into the outer wall of the pipe, and the clamping sleeve should not be deformed obviously. When the pipeline connection, and then according to the specified tightening force assembly. The tightening force of the phi 6-10mm card sleeve is 64-115N, Phi 16mmr 259N, Phi 18mm is 450N. If the sleeve is badly deformed at pre assembly, it will lose its sealing effect.(2) prohibit adding sealant and other fillers. In order to obtain better sealing effect, the sealant is coated with sealant, and the sealant is poured into the hydraulic system, causing the hydraulic components, such as damping holes, blocked and so on.(3) when connecting the pipe, the pipe should have enough deformation allowance to avoid the tensile stress of the pipe.(4) when connecting the pipeline, it should be avoided to be subjected to lateral force; the lateral force will cause the seal to be too lax.
- Q:Have you ever had a day where you view everyone else as dogs and you are the fire hydrant?
- Surge protectors help protect electrical equipment.
- Q:and then you can hook the other side to your clothes, etc, so you can wear it?
- Flanges are flat plates attached to the ends of pipes and associated fittings such as valves, auto mufflers, etc. Their purpose is to provide an attachment surface for bolting two such fittings together. An ordinary flange has a hole to accommodate flow through the fitting; a blind flange has no hole and is used to close off a fitting with a mating flange. See the ref.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Stainless Steel Sanitary Fitting Water Manifold DN50x3/4 304
- Loading Port:
- Huangpu
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords