Stainless Steel Pipe Fittings Butt-Welding 180° Long Radius Bends
- Ref Price:
-
- Loading Port:
- Dalian
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Features standards and products of our butt welding fittings:
Features of butt welding fittings:
1. High class materials
Our products only use high class raw materials of carbon/alloy steel pipes made from NKK or MANNESSMANN equipment for ordinary, high pressure, low/high temperature,boiler and other purposes.
2. Uniform wall thickness and perfectly round
This can be achieved by our particular technical knowhow and our quality control program.
3. Accurate dimension
Efficient piping work can be made only with fittings of correct dimensions and shapes. Our fittings are finished to have accurate straight/ plane ends, beveled angle...etc. to applicable standards by means of two or three spindle beveling machines.
Standards of butt welding fittings:
Our welding fittings are manufactured in compliance with the following appliance standards:
ASME B16.9 ASTM A234 MSS-SP43 WPHY60 JIS B2311 DIN2605
ASTM A403 MSS-SP75 WPHY65 JIS B2312 DIN2606
ASTM A420 WPHY42 WPHY70 JIS B2313 DIN2616
ASTM A860 WPHY52 DIN2615
Manufacturing method and process:
BUTT-WELD FITTINGS ASME B16.9/MSS SP-75
180° Long radius bends：
Packing of butt welding fittings:
FAQ of butt-welding fittings:
1) Q: What’s your main product? Which kinds of products are more competitive in your product range?
A: Our main products are steel flanges, pipe fittings and steel pipes.
Competitive Items: flanges in stainless steel, carbon steel, alloy steel and punching carbon steel
Butt welded pipe fittings in stainless and carbon steel
2) Q: what’s your largest size of flange and fitting? How long is the production cycle?
A: The largest flange we could produce is 80’’ and the largest fitting is 50’’.
In general, we spend 20-25 days in a 20-ton order. If necessary, we could make it shorter.
3) Q: Could you produce according to the drawings?
A: Sure. We could produce according to the provided drawings, which include forged and casted items.
4) Q: What kind of certificates do you have?
A: We have ISO, TUV, API,SGS,BV etc. fittings in stainless and carbon stee
Malleable Iron ,Stainless and carbon steel pipes
- Q:I keep seeing those movies where the killer has a car that is filled up with water on the inside and their victim is inside dead as if they were trapped inside the car and drown. But the car isn't submerged in a pool or lake it is as if the killer put a hose in it and drown them. Can it be so simply done or do you have to water seal your car get all fancy like that? Just the random thought of the day.
- Why you smoking drugs in the house for?
- Q:What is swagelock fitting?
- I think people put a little too much faith in satellites. I expect they are a tool for augmenting all the other means of monitoring the weather. Obviously the big advantage of satellites is they move around very quickly, and one satellite can cover a very large area, but imagine trying to take the temperature of something100 km away. You could use blackbody radiation, but only at night and only if there was no cloud cover. You would still be affected by the varing optical properties of the atmosphere. Maybe it's no wonder that James Hanson can get such contrarian results from satellite data.
- Q:This is for my reflective paper I have to write about. Topic is about using the concept of metacognition to write a reflective paper about being an English student.
- In colder climates those pipes are down below frost line, you'd probably be safe. Still that doesn't guarantee you are home free. Why not excavate one of the heads, dig down along side and see how deep the lateral pipe is. Also note which way the pipes run. You may have to do a little look see on several heads to get an idea how the underground laterals run. If you bust some pvc pipe by accident, you cut out the booboo and glue in a replacementwith fittings on either side. Some pipe lets you repair with a compression fitting. Good experience as soon or later you'll have to repair something.
- Q:how are electromagnetic waves detected???
- Set his car on fire. I'll bet they'll find the hydrant real quick then.
- Q:I have decided to put him in diapers/nappies and all drynites and adult nappies but they just leak I want advice on baby and toddler nappies, I asked him and he has NO problem at all with baby nappies as long as they don't leak like drynites and other nappies. Like I said before his waist size is 28 and his hip size is 30. I have tried some pampers easy ups size 6 on him but his *male reproductive organ* is a bit too big in them, mainly when he gets boners. I am thinking of buying Huggies little walkers size 6, pampers baby dry or a libero nappy. The doctor says that it will last for about 1 more year, maybe less. Please tell me which nappies/diapers to buy and I just listed some that I found in my local shop above. We need to buy them in a shop because we always have a problem with ordering from the Internet.
- How do you know who has rental insurance and who does not? Obviously, since the fire was your fault, you are responsible for the damages. Is it the apartment owners that want you to pay the damages or the renters below you or both? If this is a large sum of money, you may want to speak to a lawyer about your responsibilities to see if you can be responsible for others deductibles on their policies only and not the full amount of damage costs. As an added noteto all renters reading this, renters insurance is really quite reasonable, compared to this. Check it out. Call your auto insurance co. about renters insurance. I really don't know how you can get out of paying for damage caused by a fire in your apartment. As for the landlord having insuranceprobably do, don't know if they have to file this claim or not with their insurance because when they do, their insurance premiums will most likely rise. Even if they do file, there will be a deductible to pay, could be over $1000. You would be responsible for that too. As I said, speak with a lawyer and find out how much you are responsible for. If you do nothing, they will take you to court and I expect you will lose.
- Q:i bought an alarm that i would connect the actuators to but i just want to know if i would need to get different door panels (from a neon that had automatic locks to begin with or i can just install generic ones wherever i want on the doors and that would be fine too? or is it possible to still have the manual button lock and be able to use that while in the car..if anyone did this before was there any cuttin of the door required or its a fairly simple installation.thanks
- This I believe there are others that use a level to work the clamp and pull it tight. They are common for connections that must be made quickly and often like those used for gasoline tankers at your local gasoline station.
- Q:As shown in Figure six, the angle of the edge distance 71mm, diagonal 80mm, about 34mm high; and its connection of the pipe joint exposed a small section, measured its outer diameter is 57mm; through these parameters can see the pipe joint screw size is how much? Or see the specifications of the hose.To take something in this, it is not convenient to disassemble temporarily, that can check through standard size, I do not know the check which standard, hose and pipe joint standards are many, I do not call up this kind... Please explain to the master, this call what, check what standard, how to check, through the above parameters can get out what size, etc., thank you very much!! PS: the key is size. Now you're going to do the connection
- Hydraulic joint standardHydraulic pipe fittings - thread standard twoClassification of threadsThe 1. threaded internal and external threads two;2. according to the shape of teeth can be divided into: 1) triangular thread 2) trapezoidal thread 3) rectangular thread 4) sawtooth thread;3. by line, single, head and multi thread;4., according to the direction of rotation, two kinds of left and right threads, the right is not marked, left plus LH, such as M24 * 1.5LH;5. according to different uses are: metric common thread, thread sealed pipe thread, non threaded sealing pipe thread, 60 degrees taper pipe thread, metric taper thread, etc.
- Q:Inspired by another question I asked just recently.
- I'm not big on pipe dope.I use teflon tape, less messy
- Q:PPR pipe joints did not plug in the melt, in the end will leak?
- 6, the pipe and fittings into the fuse, heating according to the designated time;7, after heating, remove the pipe and pipe fittings, immediately connected in the pipe and pipe fittings connected with timely, if the position is wrong, can do a certain period of time in the mediation, but shall not exceed 5 degrees across the rotation angle;8, the connection is completed, both hands must grip the pipe and pipe fittings, to connect the rich cooling time, cooling to a certain extent, you can let go, continuous arrangement of the next section of the pipe.Three, after the completion of the pipe connection, should be on the wall or ground with colored paint to show the pipe position, to prevent the two decoration damage to the pipeline. If the water supply pipe is concealed, a strong supporting point shall be made to go through the floor so as to prevent the standpipe from accumulating and flexing, and to produce displacement stress at the uppermost branch pipe and cause damage to the branch pipe.
- Q:I'm in an apartment, and have been having trouble with my toilet fill valve. I had a leak into the tank which necessitated me turning off the toilet valve several times, and I guess that loosened the nut on that valve a bit, because I got drips coming out of that valve onto the floor. Instead of calling maintenance, I decided to try and fix it myself, and took a wrench to the nut on the toilet valve. I turned it and stopped the leak, but I also turned the toilet valve about a centimeter to the right, meaning that it pivoted about a centimeter clockwise in relation to the wall. I have no outward signs of a leak inside the wall, nor can I hear any leakage, but I'm just concerned that I may have damaged the piping in the wall somehow, and that it might be dripping or leaking without me knowing it. How is the piping usually set up inside the wall for a toilet valve?
- Why does everyone keep forgetting that the college football season is now 12 games? As for the 'Cocks, their non-conference schedule outside of Clemson, like every other SEC school, is a joke (Wofford, Florida Atlantic, Middle Tennessee), so all of those are wins. They go to Clemson, and that's always a war. In conference, they avoid Alabama, LSU, and Ole Miss. They have possibly the easiest road schedule in conference possible, going to Mississippi State, Kentucky, Vandy, and Florida (well, Florida's a loss, but the other three should be easy wins). Georgia, Tennessee, Auburn, and Arkansas come to Columbia. I'm going to say 9-3, with losses at Clemson, at Florida, and at home to either Georgia or Auburn.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Stainless Steel Pipe Fittings Butt-Welding 180° Long Radius Bends
- Ref Price:
-
- Loading Port:
- Dalian
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
