Polished Porcelain Tile Crystal Jade Serie White Color JX6002
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Crystal Jade Serie White Color JX6002 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
Why Us:
• More than 9 years tile exporting experience,RMB 200 million sales every year.
• More than 13 years tile factory running-well management experience.
• Excellent quality and Competitive price, OEM is available.
• Widely professional exporting experience all over the world.
Trade Terms:
• Payment: T/T 50% in advance, balance against copy of T/T,Weston Union, L/C etc.(Payment can be negotiale, kindly to
contact us)
• Production Lead Time: 15- 20 after deposit paid.
• Shipping Methods: by sea, samples can be sent by express.
• FOB Shipping Port: Foshan, Heshan
• If you want to deal with EXW/CIF/CNF term instead of FOB, please specify. Otherwise, FOB price will be quoted under
inquiry.
Our Service:
• Your inquiry related to our product & price will be replied within 24hours.
• Well-trained & experienced staff are to answer all your inquiries professional in English.
• Working time: 24 hours on line
• OEM is highly welcomed.
• Your business relationship with us will be confidential to any third party.
• Good after-sale service offered, please get back if you got question.
Suggestion:
Please kindly check the packages after you receive the goods, if you got wrong products/ quality problem/ short q'ty, please
get back to us as priority. Please note that you need to send us pictures of the defective items concerning this, and we will
consider to replace or refund accordingly.
- Q: i need to cut a hole in ceramic floor tile. i have tried many things such as dremel with different ceramic tile cutting attachments and a carbide hole saw.what should i try next?
- Grinds that carbide right off the bit, doesn't it? One of the previous posts has one technique, that being, drill a small hole in the tile (carbide, diamond-tip) at a slow speed with some sort of lubricant such as water (also cools the bit, but don't electrocute yourself) on the tile. Then you would thread the carbide grit hacksaw blade through the hole and hook up a hacksaw frame and cut away - - slowly. Then the tile will usually break when you are almost done. There are tile hole saw blades made, but they are not cheap, as they wear out relatively quickly. They will work up to a few inch diameter size. If it's any bigger than that, you'll probably want to find someone with a water-jet machine, like a countertop fabricator - person. A water-jet cuts just like it sounds - with water. It'll cut stone up to several inches thick. Hope that helps
- Q: I need some guidance on hanging new wall tiles in my bathroom.1) can I tile over the existing tiles2) what are the pro‘s/con‘s of ready mixed adhesive against mix your own3) is all grout standard waterproof or do i need specialist stuff4) do you tile all the walls then replace the suite or put the new suit in first then tile? bearing in mind i hope to tile over existing tiles.5) is it true you shoudl first replace your bath, fill it with water and leave it overnight to level?Any guidance would be much appreciated......
- 1. Tile can be done over clean well bonded tile only 2. You should only use a premixed adhesive in a non wet area only. Any areas such as a bath tub or shower enclosure a cement based thin set ( thin sets are all cement based) Mastics or premixed adhesive are water based and will dissolve or lose their bond over time in a wet area.Although there are some premixed thin sets but I don t trust them and have never used them since its so much cheaper to use and mix thin set. 3.Standard grout is cement based and IS NOT water proof at all! Only your epoxy grouts are.. 4 Tubs or shower base must be in before tile. Stools optional unless your doing floors which you only said walls. The exception is if your doing behind the stool as in a wainscot. 5.Putting water in a tub will not level it. Follow manufactures suggestions on this since they vary from maker to maker and styles. Water in a tub is recommended only when caulking the tile edge at the tub. Let caulking dry and let water out. Any questions you can e mail me through me avatar and check my qualifications there. GL
- Q: How can I remove ceramic tiles from a bathroom wall without damage the wall itself, as I want to paint the wall. Would steam help loosen the glue used?
- You need to plan that replacing some drywall is inevitable. I've installed thousands of sq. ft. of tile, and unless your bathroom walls are plywood, or concrete backer board, the act of tile removal will tear at the drywall in the removal process. Tile mortar (Quickset) is designed to bond Usually forever, and in that bonding it isn't going to just fall off at a touch,,,unless the wall behind it is already degraded. One option is to remove by scraping,,,STEAM will not work, though might further damage drywall. After scraping, rough sand as smooth as possible, and install new drywall over old. Then finish. Rev. Steven
- Q: I have never laid tiles before and I would like to work from the ceiling down. In the shower I am going to use thin set. the rest of the bathroom is green board. which I intended to use a tile adhesive.the reason I wanted to go from ceiling down is I think the layout will look better
- The best way to lay it would... measure from floor to ceiling lets say that its 8 ft. if the tile you are using is 12in then you know that you wild need 8 tiles from floor to ceiling. but you have to add 1/4in gap in the tile or what ever size gap you pick. so with 8 tiles 12ins plus 8 gaps (not counting the top and bottom gaps) you will have an extra 2ins that you have to figure for. It would look really bad if you had to cut the top tile to fit cutting the bottom tile will look much nicer. So the best way to do it is use a spinning laser level to find 2 ins off the floor and mark with black lines. Use nails to hold up your til to that line. Start laying the tile up form that line. Uses spacers to get the gap you would like. side note is that tiles are not all 12 by 12ins some can be as much as 1/4 bigger or smaller than that so if you get a tile like that use a nail instead of a spacer to fit the gap so all the tile are even. your eyes won't see a thiner gap but they will see tiles that aren't even. once you get to the top adjust the spaces to make all the tile nice and even at the top. once your done and the thin set is dry remove the nails holding the bottom tile in place and cut the bottom tile to the size you need. you can't really use the floor as a guild goin up cuz most bathroom floors are slopped and some sides are Higher that others and that will mess you up in you start from the floor up. hope this helps
- Q: This is a new house and they put 16 inch tiles in the bathrooms, which I don't care for. The floors are fine as far as leveling goes, but I would like to put 12 inch tiles directly over the 16 inch ones. Would there be any problems?
- I don't think I would, if it is a shiny glazed tile in place now, There wont be a bond between the old and new tiles. If the current tile is a rough slate tile, maybe. Check the recommendations of the manufacturer of the tile you want to install. Another option is to install 1/4 inch concrete backerboard over the existing tile, but it should be screwed down and that's a real chore in your situation. Maybe the manufacturer knows of a type of mortar that will work on those smooth existing tiles (assuming they are smooth). I recommend you to hire a professional if you can hire. I recommend a company ciciliot who are very professional in this regard.
- Q: How difficult is it to strip and reseal saltillo tile floors? Is this something that I can do myself or do I need to hire a professional?
- My reaction here is the following: NOOOOOOO! Well, you can. But I don' t think you should. The charm of Saltillo tile is that earthy, rustic color. That's why people choose it. All of that aside, it is your tile to do with as you please. However, there is one thing to think about before going ahead: resale value. Changing the look of an already distinctive type of tile which many people look for may hurt your chances some on this front. Handmade tiles are a real selling point with some buyers. If you've got 'em, flaunt 'em! :) What ever you decide, good luck with your reno!
- Q: looikng to get a large hall way and medium kitchen floor done been quoted 1100 with fitting for a good quality laminate tile effect would actual tiles be much more or maybe even less due to the undlay needed with a laminate?
- Tiles everytime they last forever.
- Q: How to look at the quality of tiles
- Ordinary people to buy tiles bad identification of two local brick surface and brick quality. Is also the most easily identified. (Not to listen, this is very interesting, the first hit objects can not be measured, the second voice can not be measured, this is not the way most people can use, but also has been said that the errors, but also has been used, This is a professional. Only professional workers to identify.) Most people asked is affixed to the kitchen, bathroom wall, almost all with plywood for paving. Identify the surface of the tiles, only need to take two pieces of the same brick surface together, the gap can not see the better. The porcelain surface has no holes in the surface. (High flatness, posted on the wall will not be uneven) the quality of the tiles, the hand to feel the same type of brick with the heavier the better. If you do not feel it, then try density, pour in the back of the tile, the more the better water seepage. (Kitchen, bathroom, hot summer heat, these factors directly affect the tile will crack, the higher the quality of the more difficult to appear.
- Q: I laid some ceramic tile about 6 years ago in a family room. There are some tile that sound hallow, Like they did not set in the adhesive securely. Nothing else is wrong with the tile, but it does sound hallow when you walk on it. I laid the tile on a concrete slab. How would you go about fixing this? I thought of drilling a small hole in the center of the tile and spraying some liquid insulation (that you put around windows) and grouting the hole closed with some grout the same color as the tile.
- Remove the grout from around the tiles in question. Using a stiff scraper, gently work it under the tile. Remove tile and clean both the floor area and back of tile. Vacuum and thin-set both floor and back of tile. reset and grout after about 12 hours curing time.
- Q: I would appreciate a double check on this problem. I believe I‘ve saved myself a lot of cutting, but I just want to make sure. My shower is 59 inches wide. My tile is 4.25 inches wide and tall. (square)My spacers are .25 inches wide. The middle point of my shower 29.5 inches. If I move my center line to the right or left by 2 and 1/8 inches I should be able to cover the entire width with 13 tile IF I allow for a 1/8th inch addition in each corner. Is this correct?
- too much thinking . . but thanks for the 2 points . . .really . . you are being too analytical here . . let your tile installation crew do it for you . . tell them what you want . . . but if you are so fussy that all must be dead on perfect . . good luck . . because you may still need to float the walls . . and walls are usually not square and ceilings are oft crooked as well . . sometimes you just need to fudge a bit and follow the line that everyone will see.
Send your message to us
Polished Porcelain Tile Crystal Jade Serie White Color JX6002
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
