Interior wall coating, inorganic coating, inorganic interior wall primer
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 kg
- Supply Capability:
- 30000000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description：
Inorganic mineral paint primer using silicate, special mica and other natural mineral raw materials, through the special production process processing, with non-toxic without pungent odor, no formaldehyde, benzene, heavy metals and other harmful substances.
Inorganic mineral paint primer is the first layer of the coating system, used as a topcoat foundation. Can improve the adhesion of paint, increase the fullness of paint, provide anti-corrosion function, and can ensure the uniform absorption of paint, so that the coating system play the best effect.
Product Characteristics：
Features of the primer:
1. Strong adhesion of primer and strong penetration ability.
2. The primer is highly alkaline and prevents the alkali powder of the wall.
3. The primer is very water-resistant, which keeps the wall dry at any time.
4. Primer can effectively prevent mildew and algae, with excellent performance.
5. Primer can save finish paint and enhance the adhesion of finish paint.
Product Specifications and Parameters:
Applicable places：
FAQ:
Q1 What is the main role of the primer?
A1 Increase adhesion: because the penetration and adhesion of the primer are relatively strong, so you can also let the adhesion between the top paint and the wall is improved, to avoid the phenomenon of the top paint falling off later.
Improve the base: it can also penetrate into the wall base inside, so that the absorption rate of the wall base is reduced, so that the strength of the wall base becomes higher, providing a uniform and smooth wall bottom layer for the surface paint
Q2 What is the difference between inorganic paint primer and finish paint?
A2 Primer is painted on the wall, is the foundation paint; surface paint painted on the primer, is the last course of coating. The main function of primer and topmer is different, primer adhesion is better. The performance of primer and finish paint is different, finish paint pays more attention to adornment effect more, and primer pays more attention to at alkali resistance, improve adhesion and so on respect.
Q3 Is it possible to do inorganic paint without primer?
A3 It is recommended to do primer, the penetration and adhesion of primer are stronger, which can improve the adhesion between top coat and wall surface.
- Q: What is the meaning of the charge of the polymer?
- Lithium-polymer batteries using solid polymer electrolytes are ultra-thin in shape compared to lithium-ion batteries using liquid electrolytes, with a minimum theoretical thickness of 0.5 mm and any shape and any area The Greatly improving the flexibility of the battery shape characteristics, which can be better made of any shape and capacity of a new generation of lithium batteries.
- Q: What are the dyes that do stained paper cutting?
- Dyeing the stained paper is a Chinese painting pigment.
- Q: What is the difference between thermal transfer ink and sublimation ink?
- Sublimation thermal transfer is the use of disperse dye sublimation characteristics, that is printed on the transfer paper in the dye reaches the transfer temperature, the dye began to evaporate, and constantly penetrate into the fabric gap until the transfer of paper on the dye used or tend to use Finished, transfer paper on the residual dyes less, indicating the transfer on the fabric on the more, that is, the higher the saturation, the more colorful pattern, the more realistic. This is the quality of sublimation transfer paper quality As a core element.Because the thermal sublimation is the process of dye diffusion to the fabric, so sublimation pattern transfer does not change the original texture of the material, printing parts breathable, comfortable, feel and feel good, while the heat transfer is another Of a method: cotton or cotton with a high amount of fabric itself does not absorb the color, if the use of sublimation printing cotton, it is easy to wash away. In order not to be washed out, to use a dedicated thermosetting transfer paper.When the mug, the surface of the mug has been coated with a coating to absorb the color, but the coating can not be painted on the clothes, So it can only be coated on the transfer paper, so the printer is actually the pigment printed on the thermal transfer paper with the naked eye can not see the top of the coating, and then under high temperature and pressure, the actual transfer on the fabric is the coating And pigment mixture, rather than a simple pigment, so after the transfer has a hard feel, printing part of the airtight, transfer paper quality is directly on the thickness of the glial layer, the worse the quality, the greater the thickness , If the printing pattern area is large, as a measure of personalized costumes and functional comfort and beauty will no longer exist.
- Q: I already used vht wheel paint on my wheel but.I heard enamel engine paint will is good and it will last long. So I was wondering if I should just wash the wheel and then spray the enamel engine on it. Or I should first remove the vht paint from the wheel. What tools can I use to.remove the vht paint. Good answers please. When enamel engine paint should I use
- First, the paint on top is only as good as what is underneath it. Start with a thorough cleaning. You don not want to grind the dirt and brake dust into the existing paint. I prefer a strong mixture of Casterol Super Clean. But any good strong detergent will work. Be careful as the Casterol Super Clean will eat the skin from your hands when mixed strong. Rinse well. Next, if you are having problems with the VHT paint you will need to remove it. If this VHT paint is chipping and peeling, anything you put over it will also chip and peel. Use whatever resources available to you. Chemical stripper, media blast, or just some sandpaper and some elbow grease. If the VHT paint is in good condition and sticking well, then just scuff sand. This will give the next coats of primer and paint something to bite into so it does not peel or flake. Next, prime the wheels with the recommended primer. Even with engine enamel you still need some primer or the paint will not last very long. Then paint following the manufacturer's instructions. An issue using engine enamel. It will not fully cure until it is heated. When used on an engine a couple of engine heat cycles cures the paint. How do you intend to heat the rims to fully cure this paint? Your wife or mother may frown upon you putting the wheels in the kitchen oven. Suggestion. Wheel paint would work better on wheels than engine paint. Engine paint is for engines. Wheel paint is for wheels. Duplicolor makes some nice wheel paint. See the link below.
- Q: Bought a cell phone, but also want to buy a mobile power. Looked at the Internet, mobile power in the battery there are three, but also check the investigation do not know which battery is better. The recent explosion of mobile power has occurred, so it is also more worried about this. If there is a good mobile power recommended. Thank you first.
- Soft lithium-ion battery (polymer battery) has a higher energy density, better performance and performance of any shape and other characteristics, as the majority of mainstream digital products, the preferred cell, but compared to steel lithium-ion battery , The price is still high.
- Q: What are the types of ink used in inkjet printers?
- Weak solvent ink When it comes to the solvent ink, you will think of that printing outdoor advertising with a large spray and that a bit pungent ink. Solvent-based ink because of its special ingredients so do not require the media covered with a coating, the evaporation speed The Solvent-based ink is the main component of organic solvents, are generally used ester and ketone solvents, and the process of combining the media first swell the media, and then fusion, the ink in the coloring agent and the substrate closely, so the solvent type The ink does not require the media to be coated with the coating and does the ink volatilize quickly. Solvent-based ink is a large outdoor patent, they are specifically to deal with this ink: from the nozzle to the pipeline to the final cleaning unit, all made to adapt to this ink, of course, the use of solvent-based inkjet inkjet machine produced in general Accuracy is not very high What are the attractive characteristics of the solvent ink that can produce an ink that is relatively environmentally friendly and less pungent and corroded? So the weak solvent ink is in this case began to develop space, A popular solvent ink is mainly due to the fact that weak solvent ink is not only very low taste and the ink particles are fine, the printed picture is fine and the corrosion effect is also small. It is this ink has not picky paper can print out a good photo, so it was transplanted to the desktop Epson inkjet printer, the use of weak solvent ink inkjet printer, also known as "printing press", converted into flat Inkjet printers are called "universal printers" if they use weak solvent ink. The most important feature of using weak solvent ink is that almost any medium takes care. Plain paper on the picture printing is not good, weak solvent ink can; ordinary coated paper can not print it, weak solvent ink can also be. We used a toothpick to dip ink in the iron painted on the painting, after a while is deducted by hand buckle.
- Q: In what company can do?
- Water-based wood paint is a dispersion of water and diluent paint, and commonly used solvent-based paint is different from the formula system is a more complex system. Formulation design, not only to pay attention to the type of polymer, emulsion and dispersion properties, but also a reasonable choice of various additives and take into account the interaction between the various components of a reasonable match. Sometimes for the special requirements of the selection of some special additives, and ultimately the formation of the appropriate formula.
- Q: Definition or condition or structure
- Chinese people to do a literal article, such as English foreigners have long been indiscriminate MADE OF and MADE FROM also taught as "fennel beans," the fen words have four kinds of wording to show off.
- Q: What is the difference between latex paint and whitening? What is the difference between the surface and the surface?
- Scraping and brushing latex paint is the wall decoration in the two processes, are complementary. Brush the latex paint more smooth.
- Q: I OKorder bought a p5, said that the polymer battery, I would like to ask what is lithium, if not, this battery need to fill every time? Or how much can be filled with how much?
- Polymer battery is a lithium battery, lithium batteries are generally divided into steel shell, aluminum, polymer lithium battery These types of batteries industry is generally called the polymer lithium battery for the soft lithium battery real lithium polymer battery, the use of solid Or gel electrolyte, the safety performance is very good, but the current market, the so-called polymer battery is only soft lithium-ion battery. According to the characteristics of lithium batteries, the use of the battery must not be fully charged to use, there is urgent need to use directly on the line but recommended as far as possible full of electricity, after all, lithium battery with the increase in the number of times, the battery capacity is declining, This can reduce the number of charging, increase the service life
Send your message to us
Interior wall coating, inorganic coating, inorganic interior wall primer
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 kg
- Supply Capability:
- 30000000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
