Inorganic Waterproof Material,Plugging Agent
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 kg
- Supply Capability:
- 50000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Structure of Inorganic Waterproof Material Description:
Inorganic waterproof material is to absorb advanced technology at home and abroad development of efficient, moisture, permeability and plugging materials. And it is also very good bonding material. The material of quick-setting type respectively (mainly used for permeability plugging leakage) gentle condensing type (mainly used for moisture, anti-seepage) two kinds, both for single component grey powder.Mainly is suitable for the underground buildings, walls, channel, basin, toilet, waterproof, plugging, etc.
2.Main Features of Inorganic Waterproof Material :
•Avirulent insipidity, non-combustible, can be used for water diversion project
•Moisture, permeability, rapid plugging
•Strong stick relay, anti the compressive
•Not aging, good resistance to water
3. Inorganic Waterproof Material Especification:
Number | Test Item | Index | ||
1 | Solid Content | ≥80% | ||
2 | Tensile Strength Mpa ≥ | 1.9 | ||
3 | Elongation at break | ≥550% | ||
4 | impervious 0.3Mpa,30min | No crack |
4.Inorganic Waterproof Material Images:
- Q:How do you make waterproofing in the kitchen and bathroom?
- Kitchen and toilet is a relatively stable part of the home improvement structure, it is recommended to do waterproof mortar waterproofing agent on it, mortar waterproofing agent not only with the base surface bonding firm, and puncture resistance, high strength, waterproof life and construction Material with the life, the construction of relatively waterproof coating is also relatively simple. A barrel of 20KG mortar installed on the ground can be about 5 square feet, the wall can be done about 10 square feet, the price is relatively high. But to remind, must be in accordance with the product description on the process to match and construction, so as to ensure that once and for all the waterproof effect!
- Q:How does the finished ventilator manufacturer waterproof?
- do not play any silicone and tape, to avoid the silicone tape aging caused by leakage hazards. Can be done once and for all.
- Q:Self-built concrete house finished three years after the use of large-scale housing wall leakage how to do?
- Third, from the indoor water leakage area for waterproof maintenance.
- Q:How to ensure the waterproof quality of the underground shear wall (retaining wall)?
- 4, select the appropriate waterproof material, generally designed for waterproofing membrane.
- Q:Waterproof material water leakage construction should pay attention to what
- 2, wall treatment · Wall treatment to do about 300mm high waterproof coating, to prevent water infiltration wall back tide. · Bathroom between the wall and the ground (plane and elevation) brushing height should be greater than 100mm. · The height of the shower room in the bathroom is not less than 1800mm. · If there is a bathtub, the height of the wall adjacent to the bathtub should be 300mm higher than that of the bathtub. · Waterproof height of tub is not less than 800mm. · The height of the squat should be more than 900mm. For the transformation of the toilet wall and self-built light wall, the proposed height of the waterproof to do the top.
- Q:Oriental rain rain waterproof how to
- Strict selection and the pursuit of excellence in product performance of the East Rainbow waterproof coating long-term waterproof material in the market leading the main reason. In order to test product performance, the East Rainbow company to the product to the plateau, desert, alpine, high temperature and other areas for testing.
- Q:Hello, roof with SBS waterproof material bulk density is how much?
- As the SBS coil finished with pure asphalt is not the same, the coil includes a variety of surface material weight. The following is the different types and different thickness of the SBS coil unit area weight, due to the need to lap and pave the reinforcement layer, calculate the load in the following unit area weight, the general multiplied by 1.2 coefficient.
- Q:Home improvement waterproofing problem
- 4, through the door stone paving need to do waterproof, you can directly use cf-2000 efficient composite waterproofing agent treatment, can play paste, waterproof two effects. Just on both sides of the door to do the character to strengthen the treatment on the line can be foolproof.
- Q:Can acrylic materials be perforated? How to do waterproof after punching?
- It is best not to drill in the finished product on the screen, if it is absolutely last resort, You can use fiberglass material in the hole position paper;
- Q:What is the difference between finished mortar and cement mortar?
- Finished mortar and cement mortar difference: Cement mortar is the synthesis of three main materials, cement, sand and water, and mixed mortar is the synthesis of four major materials, cement, sand, lime and water.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Inorganic Waterproof Material,Plugging Agent
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 kg
- Supply Capability:
- 50000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords