Hot Dipped Galvanzied Concertina Razor Wire/ ISO 9001 Factory
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Product Description:
High security
The blade of the concertina razor wire is very sharp, so it has a great security. But at the same time, it is also a little dangerous. But if you want to find a high security wire, the concertina razor wire must be a good choice for you.
Various applications
The concertina razor wire has many applications, it can work with many kind of fences, like the welded mesh fence, chain link fence, 358 mesh fence etc. To prevent that the people will climb over the fence, put the concertina razor wire on the top, it add up the height of the fence and it also increase the security.
Economical
Because of the raw material is less,the cost of the concertina razor wire will be a little lower than the other fencing products. And when you need a big quantity of high security products, and maybe you have a limited budget for your project, then the concertina razor wire is a quite good choice for you.
Concertina Razor Wire Specification Range
| A | outside diameter | 450mm~1000mm |
| B | length | 8m~15m |
| C | blade thickness | 0.32mm~0.6mm |
| D | blade type | BTO-10/BTO-12/BTO-22/BTO-25/BTO-30/CBT-60/CBT-65 |
| S | surface treatment | pre-hot dipped galvanized(zinc 100g/m2) electric galvanized+polyester powder coated(all color in Ral) |
Recommended Specification Options
| Option A | Option B |
outside diameter: 500mm blade type: BTO-22 core wire thick: 2.5mm blade thick: 0.5mm loaps: 56loaps clips: 3 lines clips surface treatment: pre-hot dipped galvanized(100g/m2) | outside diameter: 1000mm blade type: BTO-22 core wire thick: 2.5mm blade thick: 0.5mm loaps: 56loaps clips: 5 lines clips surface treatment: pre-hot dipped galvanized(100g/m2) |
Note: The customized specification is acceptable.
If you want to get a quick quote, please choose one, eg: concertina razor wire Option A, We will get back to you soon~
FEATURES:
hot sale products
see-through panels
hot dipped galvanized available
galvanized + powder spray available
economic products
high security products
easy installation
customer specs available
5.FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your Hot Dipped Galvanzied Razor Wire Galvanized Iron Wire Black Wire？
One of the most biggest manufacturer & supplier of wires and wire mesh，is a large-scale professional UAE Market Electric Galvanised Wire BWG 20 0.7mm Hot Dipped Galvnised Wire factory in China. Annually more than 10000 tons wires and wire mesh are exported to markets all over the world. Different kinds of wires and mesh are available according to customer’s requirements.
②What is your Technical Information of Hot Dipped Galvanzied Razor Wire Galvanized Iron Wire Black Wire?
1).Material: super carbon steel
2).Processing by drawing, hot-dip zinc-plating
3).Standard wire gauge from 8# to 24#
4).Thick zinc-coating layer
5).Super in corrosion resistance
6).Firm coating layer
7).Custom size available
10 to 15g Zinc Coating and 35kg Tensile Strength Iron Wire Electro Galvanized Iron Wire
③How long can we receive the product after payment?
In the purchase of Galvanized Iron Wire within three working days, We will arrange the factory delivery as soon as possible. The pacific time of receiving is related to the state and position of customers. Commonly 15 to 20 working days can be served。
Hot Dipped Galvanzied Razor Wire Galvanized Iron Wire Black Wire
- Q:I am replacing my garbage disposal. I have black, white wires and a black/yellow wire. How do I connect this black/yellow wire. Is this a hot wire as well?
- if you do not have a circuit tester then it is time to buy that $3.00 item === it is a little glow light that will be a dim light at 110volts and a brighter light at 220volts -- has two wires with metal ends and can help you with the disposal and wall sockets or other connections ... any hardware store has this tester. NOW ... we deal with the blk/yellow wire -- it is possible that it is a ground, or it is a hot wire or it could be to a GFIC [[ ground fault interrupter circuit ]] that is in the home panel -- OR -- who knows about the electrician that was the original wiring person --- most I have ever seen in wires to a disposal is two [2] wires a blk and a wht == this is a common mistake that most DIYers make .. they do not take the time to make full investigation and label wires as they take things apart .... get the tester as that is the cheapest way to solve also look at panel for the GFIC or call an electrician ,,,,,,,,, respectfully,,, XTX
- Q:A vertical straight wire carrying an upward 14.2 A current exerts an attractive force per unit length of 7.80E-4 N/m on a second parallel wire 7.60 cm away. What is the magnitude of the current that flows in the second wire?
- For a current I1 = 14.2 Amperes and radial separation between wires r =0.076 m, the magnetic field at wire 2 is B =0.000037368 Tesla If current I2 = 21 Amperes then the force per meter is F/ΔL =0.000784 Newtons/m hyperphysics.phy-astr.gsu.edu/hba... Goodbye
- Q:The wire is to the box
- Hi There, Here is the proper way to wire a receptacle: Before starting the very first thing to do before wiring is to make sure the power is turned off at the breaker box. First: The bare (or green) ground wire goes to the green screw terminal on the receptacle. Second: The white (neutral) wire goes to the bright metal screw terminal on the receptacle . Third: The black (hot) wire goes to the brass screw terminal on the receptacle. Finally after the wires are connected and are tight; carefully position the receptacle back inside the box and tighten the two receptacle screws. Then replace the cover plate and turn the circuit breaker back on and plug a lamp or something in to test your work. Hope this helps, Al
- Q:Well I have a mono D and it has - - + + on it and I want to to wire my dvc 4ohm sub to 2 ohms but I'm not sure what terminals I hook the speaker wire up to?
- wire okorder /... and than wire it to any of the negatives on the amp its all one channel internally so it really doesn't matter which negative u use. than wire the positive to any positive on the amp.
- Q:A wire has resistance 56.8 ohms. If another wire consists of the same material but has twice the length and half the diameter of the first, what is the resistance of the 2nd wire?
- The two wires are composed of the same material, so we can concern ourselves solely with their respective dimensions. The second wire has half the diameter of the first, which means a cross section of the second wire has only 1/4th the cross-sectional area of the first wire (the area of a circle being proportional to the square of the diameter). The second wire is also twice as long as the first wire. Since electrical resistance is inversely proportional to the cross-sectional area of the wire and directly proportional to the length of the wire, we must have the resistance of the second wire to be 1/(1/4)*2*56.8 = 4*2*56.8 = 8*56.8 = 454.4 ohms
- Q:function of a fire-wire for backing up data
- a firewire is just a port on your computer, mind you they are currently slightly faster then a usb. But what helps do a backup is the program you have on your computer, not the connection to the computer.
- Q:In a telephone splice case, do you have to strip the 2 wires you want to splice, and put them together, or does each wire that you want to connect attach to terminals in the case? I am talking about the black cases on a utility pole, that the residential phone wiring connects to.
- You are only responsible for the wiring to the dmark - on my house, it is a small green box attached to the side of my house. If you are talking about something beyond that, I can not / will not assist you. Can you please clarify?
- Q:I noticed when looking at the wiring sticking out of the end of one of my laptop power cables (the end that enters the battery), that of the green, grey and pink cables there, the green one had snapped. However, my laptop power still works fine, so what does that green wire do exactly?? Is it dangerous to use it even with that wire snapped?
- Power requires two wires, but a third wire called a ground wire is sometimes added. Usually the plug that goes into the wall has two or three prongs. If it has two prongs, no ground wire added. If it has three prongs, the ground wire is added. The ground is usually used when metal frames or cases are used. The purpose is to ground or short out the live (hot) wire should it accidentally come into contact with the metal frame, causing the circuit breaker to trip. If the ground wire was not there, it would allow a person to get shocked should they touch the metal frame.
- Q:the 2 wires that is connected from the key hole is cut .. how to fix or replace?
- If there enough wire left on each side of the cut, say 1, then you could bear about 1/4 of the wire on each side and solder the wires back together making sure you are soldering the same wires together and wrap each soldered connection in electrical tape so they are not able to touch each other. Then a final wrap of tape around them both. If you are not up to soldering you could go to an auto parts shop and get a crimp connector to do the job, again bearing of wire is needed to get a contact through the cut area. If the cut is closer to the switch then there is no option but to replace the switch.....
- Q:I Have a 02 Dodge ram with the 5.9L engine and i purchased a O2 simulator because i wanted to remove the cats. what i need to know is which wire is the Signal, 12 volt, and the ground wire on the oxygen sensor. If anyone has any idea please share some info.
- The wires should be color coated. Usually if it is a 4 wire o2 there are two white wires and two black wires and the blacks are both grounds. Same should go with the 2 wire o2 the black is usually the ground and the wite is the 12v wire.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Hot Dipped Galvanzied Concertina Razor Wire/ ISO 9001 Factory
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
