CMAX tower crane with CE ISO certificate QTZ315
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Descriptions of our tower crane:
1, QTZ315 have competitive price and excellent quality, suitable for all kinds of construction project and can work under all kinds of work condition. With their working radius from 3.15m to 71m, QTZ tower cranes are famous for their large operating ranges, varied working methods and wide uses.
2,This series of tower cranes has a horizontal jib frame, a jib-trolley radius-changing mechanism and a hydraulic self-raising mechanism.
3, It is original in design, reliable in operation and satisfactory in shape.
4,Equipped with all necessary safety devices, these cranes show a good speed-control capacity,, satisfactory operating stability and high work efficiency.
5,They are widely applied for the construction of high-rise hotels, resident buildings, high-rise industrial buildings, large-span factory buildings and tower like buildings like tall chimneys. Best after sales service will be offered which will get rid of all your worries in the purchase of our products
Advantage of our tower crane:
1, boom relief Angle is big, greatly widened the equipment capacity and scope of work.
2, suitable for the group of tower cross homework.
3, boom stability is good, combination amplitude range.
4, suitable for height have special requirements occasions construction.
5, lifting capacity big, effectively solve the high steel structure construction team crane big lifting capacity requirements.
Specification of our tower crane:
- Q:If a crane fly loses a leg will he be okay? Is it painful for him or do they just 'release' them like a lizard can release it's tail?
- Only lizards can release a part of their body, but only the tail. It probably lost its leg while it was flying because it had a string tightly wrapped around it for a long time and it finally just fell off. It would probably hurt them a little because the bloodflow would be cut off and it would be somewhat numb.
- Q:i am making a wired crane robot to pick and drop a wooden block of about 5*5*10cm dimension. I would like to know wat r the different possible lifting mechanisms by which i can lift the wooden block.Ideas other than the normal claw shaped lifters
- There are different attachments that you can put on the end of your crane to pick up this block. You can make a set of forks (like a forklift) that would slide under the block (block would have to be elevated on a skid). You can pick up this block with a suction cup. You can also pick up the block by clamping the sides of the block by replicating a scissor type mechanism.
- Q:crane:300t lift 100t pad sizes:4.5x2 mtrs.ground bearing capacity required?
- This depends on the angle of the lift and the distance away from centre of the crane. With the lift at tipping range all 400t will be distributed along the outer half of the pad or on the extreme legs. Rule of thumb is all the load is placed under the one pad. so one pad is 9 sq metres and the load is 400 tonnes so the bearing capacity must exceeds 400/9 tonnes per square metre. 44.44444t/m^2
- Q:A crane lifts a 2355 N bucket containing 1.81 m3 of soil (density=2084 kg/m3) to a height of 7.56 m. Calculate the work the crane performs.
- W=Fdcos(angle) W=mgh=2355(7.56)=17803.8 J
- Q:How many meters is the tower crane installed on the edge of the deep foundation pit?
- Hello, it depends on your design requirements, generally have the pit bottom, straight out of a tower crane base do. Or elevator shaft is also more. Generally, the foundation pit is shallow foundation pit or relatively small foundation pit.
- Q:dynamic force on crane when a load of 37k falls 1',2' 3'or 4'?
- Need more information. In general, the answer is that the dynamic load depends on how quickly the payload decelerates. The dynamic load will be the mass of the payload times the peak deceleration rate. In a strength calculation, do not forget to include the static weight component of the load. The deceleration depends on the elasticity of the cables supporting the load. If the crane has a flexible supporting structure, then that could also affect the result. (You didn't say whether the crane is the traveling overhead hoist type usually seen in a factory - which typically has a stiff support - or the cantilevered truss type seen on construction sites - where the support might have a little flexibility.)
- Q:I am looking for what the breeding season is for sandhill cranes?
- Mid-April to mid-June is breeding season for Florida Sandhill cranes lasts from December-June. For most other cranes, like those here in the midwestern U.S., the breeding season is March and April. I'm fortunate enough to live not too far from the Jasper Pulaski Fish and Wildlife Area where the Sandhill Cranes migrate every spring and fall. I always go to see this spectacular event.
- Q:electromagnetic crane
- Current sent through a coil of wire creates a magnetic field, which can be used to pick up ferromagnetic objects. Turn off the current, and the field will turn off (although it might take a few seconds to turn off all the way), dropping the object.
- Q:What does a track type tower crane look like? In that case, use?
- With a trolley, it can move in a straight lineSuitable for short range movement
- Q:this wind speed refers to that height of wind speed?
- This is not on the project department climbed to tower crane to measure wind speed, regardless of height, is listening to the local meteorological station forecast, more than five winds, should stop working.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
CMAX tower crane with CE ISO certificate QTZ315
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
