Tamko Roofing

Hot Products

FAQ

Gypsum board after the ceiling how to brush white ah?
Gypsum board ceiling: 1, the use of light steel keel according to the design requirements, or modeling or put down the light steel keel, 2, the gypsum board with self-tapping screws fixed on the dragon skeleton, 3, oil workers use anti-rust paint will be fixed by a point brush, 4, the use of elastic putty gypsum board and gypsum board patchwork (installation of gypsum board, the patchwork must stay 8-10 mm gap) leveling, naturally dry. 5, with a special gypsum board sealed with a latex paste paste in the gypsum board and gypsum board patchwork, naturally dry. 6, and then putty after 2-3 times leveling, grinding process until the smooth and smooth, 7, brush the first series of latex primer, naturally dry. 8, in the rolling brush 2-3 times the latex finish can be.
What are the applications of building gypsum in architecture?
The glass fiber, paper or mineral wool and other materials and construction gypsum mixed into a paperless fiber gypsum board, its bending strength and elastic modulus are higher than the paper gypsum board. Fiber gypsum board is mainly used for building walls, ceiling and prefabricated gypsum board composite wall panels.
The family has been renovated for 2 years, gypsum top gun nail rust how to deal with
The gun nail eye with a blade out, and then adjust the rusty putty, and so dry to do latex paint. (Mainly because you 2 years ago nail did not use rust-proof putty reasons)
I installed the lights on the gypsum board on the screw, not the kind of embedded lights
Installed relatively light, pull a few support lines on the lamp lock on the screw, expand the force point, you can achieve beautiful and practical function
Stairs on top of the gypsum board ceiling how to install 20KG heavy crystal lamp?
With a little bit of a little thick high-strength screws directly knock on the woodworking board is not on the line, I help others ceiling are placed in the light position put a woodworking board
Gypsum board wall how to paste the footboard
The same with cement. In fact, you can also use plastic, but long-term use of the proposed use of cement,
Causes of Cracking of Gypsum Board Ceiling Joint and Its Treatment
In fact, sticky bandage, kraft paper are not too, the best way is to use nylon cloth 5 ~ 6cm wide, nylon fabric weave texture composed of two directions, cutting time along the latitude and longitude along the cut, not beveled. Grass-roots treatment clean and flat; this can be a long time to keep the surface latex paint does not crack.
The back of the cabinet to do the wall, do not have to use a layer of gypsum board, and then brush latex paint it?
The best way to deal with the back of the wardrobe is to do two layers of woodworking board, between the two woodworking board with wood keel separated by about 3 cm gap, vertical plug point sound insulation cotton, in the outermost woodworking board to do a layer of gypsum Plate, after the meal putty put leveling, so you want to do latex paint or wallpaper is no problem.