Coletanche Geomembrane

Hot Products

Waterproof Membrane Roll for all Types of Ponds

Low-density Polyethylene Waterproof Membrane Roll Manufacturer

Polypropylene Waterproof Roll CMAX in China

Waterproof HDPE Geomembrane with ASTM Standard

HDPE Geomembrane Liner for Aquaponics Construction

2mm HDPE Geomembrane for Pond Liner and Landfill Project

ASTM HDPE Geomembrane for Aquiculture and Landfill Project Use

Waterproof Polyethylene Membrane Roll for Masonry and concrete dams

Geomembrane Waterproof Roll for the Agriculture Industry with High Stabilization and Stabilization

Hdpe Geomembrane for Aquaponics Construction

FAQ

When selecting a geomembrane for industrial storage facilities, several considerations should be taken into account. Firstly, the chemical compatibility of the geomembrane with the stored materials is crucial to prevent any potential leakage or contamination. The desired strength and durability of the geomembrane must also be considered to ensure it can withstand the environmental conditions and potential mechanical stresses in the facility. Another important factor is the installation ease and efficiency, as well as the geomembrane's ability to be inspected, maintained, and repaired if necessary. Additionally, cost-effectiveness and long-term performance should be evaluated to make an informed decision on the most suitable geomembrane for the specific storage facility.

nan

the mixed application of geotextile and geomembrane reaches the engineering requirements. Firstly, introduce geotextile: Geotextile is a kind of new construction materials in civil engineering, silk or short fiber are paved in nets through equippments and technology, then the needle puncture technology will make fabrics interwoven together, making the fabric standardization, making the fabric soft, full, thick, hard and satisfy the thickness requirements, short fiber geotextile or short fiber geotextile's tear-resistance strength is higher than short fiber. fiber is soft and has certain tear-resistance ability. main function: Filtration, drainage, reinforcement function specification 100 grams per square meter, 800 grams per square meter, it's main material polyester fiber has excellent water permeability, filtration, durability and ability to adapt to deformation, and surface drainage capacity. geomembrane plastic film as seepage-proof base material, the seepage-proof performance of non-woven composite soil engineering impermeable material, two cloths and membranes mainly depends on the seepage-proof performance of plastic film. geomembrane is a kind of flexible?material polymeride basic material, high waterproof material proportion, good extensibility,high?adaptability?to the?deformation, corrosion resistance, low temperature resistance, frost resistance.

nan

Membrane keyboard repair method: 1. Rub the discolored place with an eraser, and check if it can energize with an ammeter. If not, swipe that place with a 2B pencil and have another test. Then it may return to normal. 2. Use conductive silver paint. 1. First scrape off the black portion; 2. Then coat with the silver paint in the original line location.

nan

Use air heater to heat the film. And then it can be teared off directly. If there is a layer of wax on the surface of ceramic tiles, wipe the film with bean flour. The plastic film can be teared off gradually by hand, wiped by steel wool gently or teared off after heated by air heater.

nan

the main material of high definition film is PET, and the glass film material is glass. Each has its advantages and disadvantages: The production process of the high definition film is simple, and the cost is low; the glass film process is relatively complex, and the cost is high. But the high definition film still has all the shortcomings of the PET film, such as the durability problem. But the biggest problem is the thickness of the glass film, and the main advantage of the glass film is: 1, it is true to prevent scratches, unless you put the glass membrane dry broken, otherwise it is not possible to injure the screen (the internal damage will not be discussed), PET film if it is sharp scratch, there may the film scratch and injure to the surface of the screen. 2, it can achieve real no bubbles. PET film attached to the needs of experience, the average person can not do it well, but also it is very easy to leave the bubble; glass film is generally operated by a more careful people, and don't worry about the problem of exhaust bubble. 3, the translucency of glass film and the hand?feeling of the operation is uncomparable with the high definition film.

nan

The open cut method refers to a construction method that first the rocks (soil) of the part of the tunnel are all removed, the barrel and tunnel portal is built and then the tunnel is backfilled. The advantage of this method is that it is simple, rapid, economic and safe. It is chosen as the first excavation technology in the early stage of urban underground tunnel project.The disadvantage is that it may have larger impact on the surrounding environment.

nan

Clean water such as reservoir, and the pool also uses flexible impermeable geomembrane which is a typical representative of the flexible seepage proof material. seepage-proof geomembrane is preferable to a large area needs leakage pollution prevention like residue field. Cost-effective. The advantage is to prevent liquid leakage, mining waste water, sewage, petrochemical wastewater.

Geomembranes prevent contamination of drinking water sources by acting as a barrier between the water and any potential contaminants in the surrounding environment. They are impermeable materials that are installed in water storage facilities, reservoirs, or landfills to prevent the migration of harmful substances such as chemicals, bacteria, or pollutants into the water. This protective layer ensures the integrity and safety of the drinking water source, safeguarding it from potential contamination and ensuring the quality of the water supply.