Simple Thermostat For Floor Heating System
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description:
Electric thermostat for floor heating or hot water radiator heating systems
Model Number: TR90
Specifications
TR90 floor heating room thermostat
Temperature range:5-30 C
Contact capacity: 16A(4)/250V
Sensor type: gas filled sylphon
Diamension: 80X80X37MM
Voltage: 110(± 10%)VAC / 220(± 10%, -15%)VAC, 50/60Hz 24VAC ( option)
Differential Temperature: 1 ° C Max
Setting Temperature Range: 5° C~35° C
External Limitation: 5°C~60°C( factory setting 35°C)
Mounting: Mounts directly onto wall or wall-box
Temperature range: 0° C - 40 ° C
Sensor type: NTC
Color: White ivory
Relative humidity: < 85% (23 ° C)
Housing material: anti-flammable PC
Dimensions: 86mm× 86mm× 13mm(H/W/D)
Basic function:
1. Recommended for control of underfloor heating and electrical heating.
2. Electronic on/off control up to 3600W, 16A or 6000W, 30A
Photo:
FAQ:
① why from okorder？
Okorder is a qualified supplier of all kinds of building matierials in China. All products have been showed in Okorder website are under well controlled by okorder QC team.
All products had been produced under a clear quality standard and the quality is consistence among the shipments.
Okorder has already setted up more than 20 warehouses in different markets to show the products. You are convenient to know the products from your local place and it will help you to make decision easyly.
②How to guarantee the quality of the products？
We have established a perfect quality management system，as for raw material and semi parts all are under strict quality test and we have a IQC system to control the purchases.
QC on site is very strict and all steps of process are measured per drawings. Before delivery, we set a OQC system to make sure each piece meet the standard of order.from design to delivery,
③How long can we receive the product after purchase?
Lead time depending on order quanity, The normal order can be deliveried with 3 weeks.
- Q:Which brand is good to warm?
- First of all you have to understand, to warm is a system, not just a component or a product, to warm the brand is almost the quality of the company to warm and the installation process to decide. The heating company is indeed a difficult problem, need to consider a lot of factors, first, the company good reputation; second, the company size to large; third , With the quality of the material reliable, the best choice of a level of energy efficient boiler, and now high gas costs, can save a lot; Fourth, the construction should be standardized, have their own construction company or construction team; fifth, have special Of the after-sales department; this is my own home in the election heating company summed up, hoping to help you.
- Q:Public bath with water heating
- The cost is too high to operate.
- Q:I see the panel has a "cycle of digital time relay", the United States called microcomputer controller, as well as seismic pressure gauge, the rest is the switch indicator light, and there is no knowledge of what (estimated that there are two A solenoid valve a tube of water a gas), this thing on the market to sell more than 2000, I feel the cost of 200 to 300 yuan (guess, because I do not know where the burden of the child to pay the nuclear shop is too much money). Hope to tell the internal structure, which there are any components, I would like to do one, have a better picture, as well as cleaning, "time relay" set parameters (water and ventilation time), hope you greatly educated, brother Thank you The More
- come on, come on, come on...
- Q:One hundred and seventy square meters of house electric heating to use much of the furnace?
- One hundred and seventy square meters of house electric heating to use much of the furnace?...
- Q:Do you want to turn off the water return switch when the geothermal pipe is exhausted?
- Geothermal (floor warm) water separator: We are exposed to the only equipment, but also we need to operate the exhaust equipment. Divided into the supply (into) water pipes and back (out) water pipes, in general, the top of the water supply pipe, the bottom is the return pipe, each have a valve, the ball valve: the horizontal direction is open, vertical helium float Feng Tong Feng is off. Gate valve: screw clockwise screw is off, counterclockwise twist is open. Another tool: a soft leather tube, the size and exhaust valve port similar to the elastic, can be tight in the exhaust valve port, to prevent the discharge when the pop, affecting health. A basin. 1. It is best to determine the exhaust in the normal heating 2. The best one by one system exhaust, in the geothermal first run process, because the pipeline pressure and water resistance is easy to produce air plug, resulting in water supply is not recycled, the temperature is not equal , Should be carried out by road exhaust. The method is: turn off the heating of the total return valve and the loop control valve, (the total return valve in front of the water separator, the pipe below the tube, the low temperature of the pipe is the return pipe.) First open the water separator A control valve, and then open the drain on the drain valve on the exhaust valve exhaust, drain the air and then close the valve, while opening the next valve. And so on, each way the air is drained and then all the valves open, the system is running. 3. The number of exhaust and heating are directly related to the length of time, such as running water and heating time, just started heating and fast heating because of heating time is short, circulating pump and heat transfer station also has time to stop, easily lead to gas block, so everyone Should be more exhaust, generally completely after a gas can be. In the later exhaust do not have to close the valve, you can directly discharge a small amount of air
- Q:Home gas boiler why the circulating pump is always non-stop turn?
- Gas boiler water pump will automatically start and stop according to the water temperature, under normal circumstances during the water pump is kept non-stop. Because the pump operation can make the system temperature uniformity, the temperature inside the furnace can reflect the system temperature. But not all brands of fireplaces are so. So the pump motor is not working properly.
- Q:Precipitation of pulverized geothermal cleaning machine
- 1, pulse cleaning machine is a high-pressure gas-water mixing equipment, the body parts are strictly prohibited twist, or easy to produce leakage leak phenomenon, man-made machine failure. 2, air compressor boost is relatively slow when you can determine the air compressor piston ring need to be replaced. The expansion of the piston and the cylinder gap of the air compressor will cause the air compressor lubricating oil to flow into the tank and convey it to the pulsator via the gas tank, possibly causing the pulsator intake control device to fail. At this point need to clean the intake control device. 3, had to use the ground drain direct sewage will be sewn off the hook burst of feedback. It is therefore strongly recommended that the sewage sludge be used to prevent contamination of the environment or to cause damage to the quality of the drainage system. 4, cleaning, such as the discovery of poor sewage, should immediately stop the intake air, remove the solid impurities before they can continue to clean. 5, pulse generator, if gas, water leakage, please stop working, please contact us for maintenance. 6, winter construction, in order to prevent the process of outdoor transport within the machine pipe fittings freeze, please after the completion of the washing machine will be clean water inside the sweep; summer construction, because the air humidity, the machine internal pipeline may occur condensation Water out, this is a normal phenomenon. 7, during the winter heating heat, the ground needs 1-2 days of heat storage and heating process, geothermal return pipe will not immediately heat, should be explained to the customer.
- Q:Components of solar water heaters
- The main part of the water tank, bracket, vacuum tube composed of three parts. But the whole, the light solar water heater host this part is only a semi-finished products, there should be part of the parts should contain the control system, electric heating and piping part.
- Q:The working principle of the heat transfer station
- A heat source through the pipeline to the heat transfer station, and into the heat exchanger, heat exchanger through the heat exchanger, the primary heat exchange to the secondary heating pipe, the secondary heating pipe leads to hot users.
- Q:To warm the type of too much, do not know what kind of election, and now the most is the kind of ah?
- You can try under the hot geese to warm.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Simple Thermostat For Floor Heating System
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
