Laminated Frontlit Flex Banner
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 30000 Meter m²
- Supply Capability:
- 20 Container Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Frontlit flex banner for digital printing
1. 1.02~5.0m wide
2. suit for solvent base inks
Features of flex banner:
1. Glossy and Matt style available
2. Weather resistant (UV, rain, typhoon and frost)
3. White substrate for wide format digital printing
4. Applicable to Vutek, Scitex, Nur, Infinity, Flora printers
Typical specifications of flex banner:
Code |
Description |
Base Fabric |
Weight |
LFG23/340G |
Frontlit Banner |
200D*300D/18*12 |
340g/sqm (10oz) |
LFG35/440G |
Frontlit Banner |
300D*500D/18*12 |
440g/sqm (13oz) |
LFG55/440G |
Frontlit Banner |
500D*500D/9*9 |
440g/sqm (13oz) |
Package: Each roll is wrapped with kraft paper or packed in paper tube.
Application of flex banner:
1. Billboard (frontlit)
2. Exhibition booth decoration
3. Displays (indoor and outdoor)
4. Building murals and instore displays
- Q: Foam concrete for the roof cushion generally do much bulk ah
- in recent years, the density of 160kg / m3 ultra-light foam concrete is also used in construction projects.
- Q: Why do the basics of the cushion waterproofing
- As for the bottom of the bar thickness of the protective layer is generally 4cm, but if the basic floor of the concrete label is relatively high, the protective layer can be appropriately reduced.
- Q: The top floor made waterproof playing cushion layer of how to do
- 4. The second layer to do mortar waterproof (mortar waterproof), waterproof at the same time can protect the bottom of the flexible waterproof.
- Q: The roof cushion is waterproof on the slope roof
- Most of the slope roof itself is not waterproof. The role of the slope roof is used for drainage,
- Q: Is it possible to make a waterproof layer
- 2, waterproof layer: In order to prevent the rain into the roof, groundwater into the wall, basement and underground structures, indoor water into the floor and walls and other materials layer.
- Q: What is the difference between leveling and cushion?
- Commonly used materials are, cement mortar leveling layer, fine stone concrete leveling layer, asphalt mortar leveling layer and so on. Leveling layer and the difference between the cushion, which is a very easy to confuse the two engineering concepts.
- Q: Is foam concrete suitable for use as a cushion?
- And then through the foaming machine pumping system for cast-in-place construction or mold forming, the formation of natural conservation with a large number of closed pores of the new lightweight insulation materials.
- Q: Large area ground concrete cushion seam Why is the separation of joints generally concrete
- hird, the relevant parts Different types of rigid waterproof layer separation spacing in addition to meet the calculation needs, but also in the following parts set sub-grid joints. 1. The deformation of the roof structure sensitive parts; 2. Roof and roof drainage direction changes; 3. The junction of the waterproofing layer and the protruding roof structure; 4. Under normal circumstances, each bay load-bearing walls should be set sub-grid seam. 5. Between the waterproof layer and the load-bearing or non-load-bearing parapet or gable should be set sub-grid joints, and in the node structure for proper treatment.
- Q: What is the waterproof layer and the waterproof cushion in the tile roof?
- Waterproof: In order to prevent rainwater from entering the roof, groundwater infiltrates the wall, the basement and the underground structures, and the indoor water penetrates the floor and the wall.
- Q: Basement floor mattress dry to what degree can do coil waterproof?
- First, the basement moisture treatment structure is usually: first in the basement wall outer surface wiping 20mm thick 1: 2 waterproof mortar, basement walls should be used cement mortar masonry, gray seam must be full; and in the basement floor and the first Floor floor is divided into two walls of the level of moisture-proof layer. The outer wall of the basement wall should be tampered with the soil with poor permeability.
1. Manufacturer Overview
Location | Zhejiang,China |
Year Established | 2002 |
Annual Output Value | Above US$ 10 Million |
Main Markets | 30% South America 20% Southeast Asia 20% Africa 10% Mid East 10% Eastern Asia 10% Central America |
Company Certifications | ISO 9001:2008;CE |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | Shanghai |
Export Percentage | 21% - 30% |
No.of Employees in Trade Department | 21-50 People |
Language Spoken: | English; Chinese |
b) Factory Information | |
Factory Size: | 30,000-50,000 square meters |
No. of Production Lines | Above10 |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | High; Average |
Send your message to us
Laminated Frontlit Flex Banner
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 30000 Meter m²
- Supply Capability:
- 20 Container Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords