HK 2014 Needle Bearing HK Series High Precision
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Specifications:
Type: | Needle | Brand Name: | OEM | Bore Size: | 20 mm |
Outside Diameter: | 26 mm | Model Number: | HK 2014 | Precision Rating: | ABEC-1 |
Seals Type: | Open or Sealed | Number of Row: | Single Row | Place of Origin: | Jiangsu, China (Mainland) |
Material: | Chrome Steel | Lubrication: | Grease Lubrication | Package: | Plastic Bag and Box |
Equivalent: | HK 2014 |
Drawn Cup Needle Roller Bearing :
The outer ring of drawn cup needle roller bearing is punched with the high-quality steel sheet. The outer ring has thin wall.The drawn cup needle roller bearing has the characterstics of small radial section area, large load carring capacity ,less inertia and economic manufacture. It is suitable for small section heght, or when the housing bore isnot used for raceway , this type is recommended to use .The bearing is assembled into the housing bore under a certain pressure without fu rther axial location.
The draw up needle roller bearing generally takes its shaft diameter as the internal raceway .However , the proper LR type inner ring can be used in accordance with application condition.
Our Advantages:
1. Excellent and high quality control
2. Prompt delivery
3. Competitive price
4. Small order accepted
5. Customers' drawing or samples accepted
6. OEM service
Application Area:
Needle roller bearings are mainly used in car engines, transmissions, compressors, cranes, etc.
FAQ:
WHY CHOOSE US ???
1.More than 28 years export experience
2.Strict quality control
3.Delivery in time
4.OEM service are available with good price
5.Low MOQ
- Q: This may seem like a stupid question as I am just learning to skateboard.I bought a brand new complete board with abec 5 bearings and they seem quite stiff. Am I suppose to oil them before I ride or do they eventually loosen up as I ride? Also I took the riser pads off because I heard it makes it easier to learn to ollie, will this help me? I have 51mm wheels so I dont think they will rub against the board.Thanks for your help.
- spray a little dwi 3 oil on them.
- Q: Well i recently bought a pro scooter and bout ABEC 11 bearings. I want to know if the higher number is better or the lower number?
- The higher bearing number is better for those bearings
- Q: I will teach about bearings/bearing problems (trigonometry),and I'm looking for some good and fun teaching motivations or visual aids to catch the attention and interests of the students...Do you know some?or can you site a specific website on some good visual aids and teaching motivation?....thanks a lot! ^_^
- This will work for any subject category. Give it a try and good luck.
- Q: what bearings are faster? black panter bearings or red bones bearings?
- bones reds are faster, and lasted me longer than black panther did. theres a smiply reasoning behind this. Reds are made by Bones with speicallizes in skateboard bearings and makes the most top of the line bearings out there Black Panthers, made by Shorty's arent nearly as good quality as the majority of shorty's efforts go to things like decks bushings hardwear and bearings so they cant make them of such a good quality.
- Q: On a big truck that holds a 3 pc. drive line and has 2 carrier bearings, is it best 2 keep the bearings level?
- It is important to keep the bearings square with the drive line. The whole point of having the bearings to support the multiple piece drive line is so that the shaft doesn't need to be absolutely level with the frame, or to be absolutely straight from the transmission to the differential. THE ONLY CRITICAL angle is that the mating surfaces of the transmission and the differential must be within a tolerance of 1-1/2° of each other. The OTHER critical issue is that all of the bearing bosses must be square with each other. If the number 1 joint is positioned at 12 o'clock, then numbers 2 3 must also be at the same index or the driveline will grow under load and at speed ( 40 MPH) and will exhibit a server vibration. Good Luck
- Q: i have removed the rear wheel and centre cap do i need to remove the drum
- Hello Tony, When you are replacing your wheel bearings, front or rear, you will need to remove the braking assembly, regardless if it has drum or disc brakes. The bearings are either housed in a hub that has the studs machined into it, or they are part of a hub assembly that also has the studs machined into it. Anything between the lug nuts and these bearing housings (hubs) needs to be removed. Good Luck!
- Q: At speeds above 60km/h (37ish miles/h) my car starts to vibrate and it sounds like my tires are squealing, but when i am turning right vibration disappears and also the sound of the squealing, however when turning left it gets worst then going straight.This happened after i hit a curve and i got both steering and wheel alignment check. Also i installed another set of rims and the symptoms are same.
- It could be a number of things but I would guess the wheelbearings, or at least one is bad. It could also be a bent tie rod, shot ball joints... Most wheelbearings tend to make noise as speed increases...but not in ALL cases. I'd take it in for a front end inspection and go from there.
- Q: Okay so I wanna clean out my bearings, but I dont have any rubbing alcohol, but I do have hydrogen peroxide...I was wondering if it works and how to use it. Plz tell me asap!!! also, does sewing machine lube work to lubricate the bearings?
- first of all NEVER use things like hyd. peroxide or sewing machine lube or WD-40. it clots up, collects more dirt and actually can cause more friction between the ball bearings and the shell. and absoloutly never use water, unless you want rusted shackles. only use actual skateboard lubricants, top kind out there right now is Speadcream by Bones.
- Q: Should i get better bearings and is it ok if your foot is a little turned when you kick the one on the board im regular and i weigh 236
- Try Redz. Your bearings are probably old, so they don't function as well. Another possibility is that you left them out in the weather and they have rusted. Try buying some new ones. Redz are fairly priced ($20) and great durability.
- Q: If there is then please give me a link to them and name of the bearings
- The Seismic Tekton ABEC 7 bearing is one of the better long board bearings. They hold the World Speed Record. Look them up for the full particulars of their design and features.
Send your message to us
HK 2014 Needle Bearing HK Series High Precision
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
