Product Description:
Product Description
CMAX ceramic fiber board are manufactured in a wet vacuum forming process by blending the chopped ceramic fiber with inorganic or organic binders for excellent abrasive resistance at high temperature. The products are classified as STD, HP, HA, and HZ respectively corresponding to different maximum service temperature 1000℃,1100℃,1200℃,1350℃ and 1430℃.
Data Sheet
| STD | HP | HA | HZ |
Temperature Grade | ℃ | 1260 | 1260 | 1350 | 1430 |
℉ | 2300 | 2300 | 2460 | 2600 |
Recommended Operating Temp. | ℃ | 1000 | 1100 | 1200 | 1350 |
℉ | 1830 | 2010 | 2190 | 2460 |
Available Density | Kg/m3 | 240-400 |
lb/ft3 | 15-25 |
Color | | White | White | White | White |
Thermal Shrinkage (24hrs) | % | -3.3 | -3.2 | -3.6 | -3.8 |
℃ | 1200 | 1260 | 1350 | 1400 |
Thermal Conductivity (W/m.k) 128Kg/m3 | 800℃ | 0.136 | 0.128 | 0.120 | 0.114 |
1000℃ | 0.152 | 0.150 | 0.143 | 0.146 |
1200℃ | 0.190 | 0.178 | 0.160 | 0.158 |
Chemical Composition |
Al2O3 | % | 45-47 | 47-49 | 53-55 | 38-54 |
Al2O3 +SiO2 | % | 97-98.5 | 98-99 | 98.5-99 | 83-89 |
ZrO2 | % | - | - | - | 10-18 |
Standard Size | mm | Length: ≤1500mm Width: ≤1200 Thickness: 3-150 (Non-standard sizes are available upon request) |
Application:
1.All kinds of industrial furnace hot face and back face insulation
2.Kiln liner of the high-temperature furnace, kiln cars, door damper, furnace temperature to separate plate
3.Deep processing products molding mould, like Craft glass etc
4.Astronavigation,Shipbuilding heat insulation,fireproofing, sound proofing, insulation.
Characteristics:
Low thermal conductivity
Excellent thermal shock resistance
Low heat storage
Resist most chemical attacks
Shorter heat up and cool down time
Easy to cut or install
Pictures:
If you have any question, please contact us and welcome to visit our factory!
We can produce ceramic fiber board according to your requirements!
- Q:plase edit in perfect English???
- carry five grocery bags from the car to the kitchen and put the food away take out the trash wash the dishes and wipe down the kitchen counter
- Q:What are the materials used in thermal insulation?
- A fun (fire cracker) one we used to make is to get two cans - one just slides inside the otherYou fill the larger with some water - and then punch a hole in the bottom of the other - slide it down into the water - and put a firecracker into the hole in the top of the smaller can - light it and runMakes a great rocketThe blast of the firecracker is contained very well against the water in the larger can - and you can blast the smaller can 30 feet into the air sometimesFire crackers are just black powder - carbon, salt peter and sulfur, and it's a fairly rapid oxidizer.
- Q:What types of toddlers are high in fiber?
- I like to use about an 11 needle and if you already have the worsted just double it.
- Q:knitting a mittenHELP pls.?
- That's an interesting way to make a mittenBasically, at this point you're going to focus only on the thumbThat's the kfb, k6, kfb section you just didThe rest of the stitches on the left needle will not be used for nowSo you can set them aside someplaceEither thread them onto a spare needle or onto a piece of dental floss just to keep them from unraveling while you take them off your needleThen purl across those ten thumb stitches, and put the remaining stitches on the left needle onto dental floss againSecure the ends of the dental floss by tying them together with a knotAt this point, you continue working back and forth on the ten stitches of the thumbLater, when you finish the thumb, the pattern will instruct you to pick up or return to those stitches for the hand that you set aside (on the dental floss)Carefully thread them back onto the needles where they were, using the dental floss as a guideThen clip the floss knot and carefully pull it out of the stitches, leaving them in place on the needles- edited to add - You can use waste yarn to thread through your stitches, but be careful it is a smooth yarn and a color that goes well with your main yarn because sometimes it picks up fibers from the waste yarnIt's really sad to see a line of red fibers from a waste yarn embedded on white knitted fabricIt can't pick up fibers from dental floss, and everyone has some, so that's the preferred material for holding stitches when you aren't using them.
- Q:Make rope out of yarn team building activity?
- for a 5 foot piece of rope, you need to measure 12 feet of various kinds of yarns(this requires 2 to 3 people measuring each one.) Then tie the strands together with overhand knot and slip a broom stick through the yarns on each end, making sure the yarns are all the same length., a couple of people down the length of the yarns and one or two in centerEach end twists the yarns clockwise from their endpeople in middle keep the rope from kinkingone end is folded over another broom stick and brought to other endThese are turned loose by remmoving the sticksNow the rope is smoothed out from the middle to both endsNote: I am a spinner and make my own yarns from various natural fibers and some exotic ones tooI use a spinning wheel to do thisThen the yarns are ready to be used on my loom/ the sheeps wool for instance is very fine and fragile pulling apart really easily, but when it is spun into singles it is much stronger and harder to break, when I make it into 2 ply or more yarn, it is really hard to breakMuch stronger yarn than synthetic yarns are.
- Q:how do i do insulation?
- The cheapest way, which is avoiding removing the wall covering on the inside, or removing the exterior material is to drill holes at the top of each wall every 16 (There is a cavity in the wall formed by the studs and wall coverings) and blow in insulationThe machine to do this can be rented at some homecenters.and they of course, sell the insulation This can be done in the attic as wellAs far as the holes you drill, they will have to be repaired, and hopefully will not be noticeableI dont think there is enough room to access from the attic, unless you have a very steep roofAnd, if you can, there will probably be a double plate of 2x4s to drill and blow through Possible, but improbable, take a look and maybe you'll be lucky.
- Q:What is the best kind of yarn for knitting a wonderful scarf?
- if you are talking about aluminum ingots , the price of aluminum is always changing according to the marketYou can call a recycler and ask about the current pricing.
- Q:how can i lose??????
- actual you will could ask for an extension and bypass and do it suitedI understand this will not be the respond you desire to hearken to however no longer something can replace in that trypossibly inspect yet another one?
- Q:Does anyone know how energy efficient rebates work?
- If pan is thick enough and has a cover may work as a dutch oven but likely best to cut up chicken and simmer or fry.
- Q:What materials is a rocket ship/space shuttle made out of?
- Call Skutt, they will help you if you call.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
