Rated voltage 8.7/15 kv crosslinked polyethylene insulated PVC sheathed power cable
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product standards:
This product according to GB/T12706 the rated voltage 1 kv ~ 35 kv extrusion insulated power cables and accessories, standard production, at the same time can also be based on user needs according to the international standard of IEC, English, German and American standard production.
Available scope:
This product is suitable for rated power-frequency voltage up to 3.6/6 kv ~ 26/35 kv power transmission and distribution lines with.
Using features:
Rated power-frequency voltage U0 / U for 3.6/6 kv ~ 26/35 kv.
The allowable working temperature, cable conductor: 90 ℃.
, when short circuit (the longest not more than 5 s) cable conductor does not exceed the highest temperature of 250 ℃.
, when cable laying temperature should not below 0 ℃.
The bending diameter: 3 core cable is not less than 15 times the cable diameter; Single core cable should not less than 20 times the cable diameter.
The selection of rated voltage
, the rated voltage of the cable shall be suitable for the operation condition of the cable system, using U0 / U (Um) kV said.
U0 - cable design, use of the conductor to ground or between metal shielding rated power frequency voltage;
U - cable design with rated power frequency voltage between conductors;
Um - equipment can withstand a maximum of the "highest system voltage".
A system ─ ─ the system phase conductor and earth and the grounding conductor, separated from system within 1 min;
B system ─ ─ the class system is single-phase earth fault in a short run, but in any case the longest run time does not exceed 8 h, ground fault total duration of not more than 125 h every year;
C system ─ ─ don't belong to the class A and class B system.
●Type of cable
| Type | Name | Scope of application |
| YJV YJLV YJY YJLY | Copper cross-linked polyethylene insulated PVC sheathed power cable | For laying indoors, in tunnel and in cable trench, place, unable to bear external mechanical forces. Single core cable in magnetic duct is not permissible. |
| YJV22 YJLV22 YJV23 YJLV23 | Copper core with cross-linked polyethylene insulation tape armored PVC sheathed power cable | For laying indoors, in tunnel, cable trench, or direct buried, able to bear external mechanical forces, but unable to bear large pulling force. |
| YJV32 YJLV32 YJV33 YJLV33 | Copper cross-linked polyethylene insulated fine steel wire armored PVC sheathed power cable | Indoors, in tunnel, cable trench, well or direct buried, able to bear external mechanical forces and cer |
- Q:Please, its urgent. Is it possible to use another wire? I don't have money btw.
- Disconnect the power cable to the CD or DVD drive for a while and use it on the hard disk for now if you have no money. That way you can use it.
- Q:I have a Technics SL-D20 Turntable recently purchased from a garage sale that lacks a power cable. The turntable has a 2 prong adapter, but it is not one that has a square and semi-circular portion, but rather seems to accept an elliptical two pronged cable. It is listed on the back as Power Source AC120V 50 or 60hZ 6wThank you
- Man that could be tough. It sounds like a belt drive turntable, I'm sure of the name of the part, but it's basically there to move the belt; it isn't metal so it isolates the belt, thus reducing vibration and transmission of motor noise. That's what I think it is anyway. I'll bet if you go on some audiophile web sites, you can find a parts listing for that model, and get a name and part number. Technics were very popular, I've got a belt drive one myself that I haven't hooked up in 10 years.
- Q:What are the cycles and requirements of the experimental project of the power cable experiment?
- In addition to considering the security issues, there is no problem, you can use this, there is no impact on the charging situation, rest assured
- Q:Okay so I am trying to upgrade my graphics card and In order ti di That I need a new Power Supply Unit. The PSU I was looking at is a 850 watt one and it has six pin connectors. The problem is all my componets are 4 pin connectors. If I get the new power supply can I somehow get a 6 pin connector to fit in a four pin like a adapter or something. BTW in order for the graphics card to function I need a six pin but all my other stuff in 4. So is there a way to work that out
- exchange the PSU, for a extra powerful one. 430W @80percentefficiency = 344W 500W @80percentefficiency = 400W 600W @80percentefficiency = 480W 650W @80percentefficiency = 520W 700W @80percentefficiency = 560W 750W @80percentefficiency = 600W 800W @80percentefficiency = 640W 850W @80percentefficiency = 680W 900W @80percentefficiency = 720W 950W @80percentefficiency = 760W 1000W @80percentefficiency = 800W minimum PSU 700W-800W.
- Q:I have a power adapter that goes to a mixer (Denon DN-MC6000) and reads: INPUT 100-240V ~ 50/60Hz 1.5A, OUTPUT: 12V - 3A. Now I know this is the right adapter but I don't know if I have the right cable that goes from the adapter to the wall. I have one that says 6A 250V~ but I dunno if its the right one. I have a few others but can someone tell me what will be the right one so I don't blow up my mixer :P thanks
- This type of power cable can be plugged into any household power between 100 and 240 volts. So, any plug that fits into the wall plug is the right one. In the US and Canada the voltage is 110-120 volts. In the rest of the world 240 volts are used The plug and wire you mention is for the rest of the world. Now look at the adapter where you plug the cable into. Do they fit together? If yes go for it. If not keep looking.
- Q:I'm referring to the older models of both the PS2 and PS3, not the slim models.
- The USB adapter works for me. On some video games like Soul Calibur you are able to press the analog button previously the controller will initiate working, and it gets fussy some situations having to unplug it and placed it back in.
- Q:then directly to the capacitor. or should the resistor be in the middle of the power cable.
- The resistor just has to be in line somewhere between the battery and the capacitor, and it is TEMPORARY. Its' only purpose is to slow down the initial charging of the capacitor so you don't get a giant spark. Once the cap is charged (which shouldn't take much more than a minute, depending on the size of the capacitor) the resistor gets removed. What I always do is remove the main power fuse at the battery, then connect the uncharged capacitor into the system near the amp, mount it, ground it, and then just place the resistor across the fuse holder's terminals to charge the cap before I put the fuse back in. Actually, I use a 12v test light instead of a resistor; when the light goes out, the capacitor is fully charged.
- Q:I have a cam camcorder battery charger power cable and I want to use it as a ps1 power cable. Is It possible. The both look the same.
- The charger isn't meant to be a capacity source, purely a charging source. As such, with out battery, this is voltage will selection badly whilst a load is utilized and would land up adverse the stereo and/or the charger.
- Q:Like I lost my power cable, so can I get one somewhere?
- most amps use the same cable, so it shouldn't be a problem, through your amp in a car, (to double check) and check the local music stores, electronics shops, or Radio shacks
- Q:3 (WDZBN-YJV-4x240 + 1x120) cable how to interpret
- Should be such a model it WDZB-YJV0.6 / 1kV4x240 + 1x120 power cable halogen-free low smoke flame retardant B grade refractory cross-linked polyethylene insulation - polyethylene jacket 0.6 / 1kV power cable, 4 core 240mm + 1 core 120mm copper Core cable.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Rated voltage 8.7/15 kv crosslinked polyethylene insulated PVC sheathed power cable
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
