PVC Pressure Pipe PN10&16 ASTM, AS,BS,ISO
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:How long do plastic tubes last?
- The lifespan of plastic tubes can vary depending on factors such as the type of plastic used, the quality of the tube, and its usage conditions. However, on average, plastic tubes can last anywhere from a few months to several years.
- Q:What's the name of that plastic tube used to fold stars?
- (1) the straw is bent back;(2) turn left pipe to the lower right;(3) turn the upper pipe to the left;(4) turn the two pipes together;(5) wrap the left tube over the right tube and fold it to the lower right;(6) wrap the upper tube over the lower tube;(7) the two pipes are turned together, with steps (4), repeating steps (4), (5), (6), (7);(8) stick the first angle close to the two pipes;(9) wrap the left tube over the first corner;(10) turn the top pipe down to the bottom;(11) repeat steps (9), (10) fold the tube to the end;(12) pass one of the tubes through the stars;(13) trim after tensioning;(14) complete
- Q:I remember having it as a kid and am wanting it for some stocking fillers! cant for the life of me remember what its called. have looked up all kinds of things on the net and not found a thing!
- I okorder /
- Q:What's the plastic pipe that the street lamp foundation is exposed to?
- The special lamp type is installed according to the design requirements. The height of the lamp is equivalent to the width of the road which needs to be lit. Only in the side lighting H = L H = L/2 lighting on both sides of the H luminaire mounting height (m): L Lu Kuan (m)
- Q:Our side-by-side, outside water and ice collector barely lets the water come out. We have plenty of ice because it usually never used. We did notice that the plastic tubing inside the refrigerator, is wrapped many, many times in a fairly large circle, plus, there is a kink in the tubing several inches before it disappears inside of the back of the refrigerator.Should I get rid of this extra, extra tubing, along with the kink? How many feet of this tubing should be inside the fridge?Thanks to all that answer.
- ours is rolled in the same position except there is no kink i just went and checked maybe thats why it dont come out good or maybe you have hard water and its clogged hope this helps you
- Q:i want to buy it
- Its not worth it to get plastic tubes. They get smelly really fast and no matter how much you clean them, there is always going to be a smell associated with it. Just use paper towel rolls-they are much cheaper and when they get soiled all you have to do is throw it out and replace it with another!
- Q:UPVC what material is the pipe and the HDPE plastic pipe?
- UPVC is modified polyvinyl chloride. The tubing is brittle, flexible, and has a weak connection. HDPE is high-density polyethylene, flexible tubing, -60 degrees - 40 degrees can be safely construction. The use of hot melt and electrofusion connection method is very strong, generally used for drinking water supply pipe, gas pipe, coal pipe, etc..
- Q:Jump rope in the middle of the cut of plastic pipe role
- Prevent wear. The position of the plastic pipe is the place where the rope is contacted with the ground, and the utility model is easy to be broken, and a plastic tube is added, so that the abrasion can be effectively prevented.
- Q:When i go to my local fish store some tanks have a small piece of PVC pipe in them, its just sitting on the bottem of the tankwhats it for?
- fish hide in them. a make-shift cave.
- Q:Can plastic tubes be used for storing art supplies or materials?
- Yes, plastic tubes can be used for storing art supplies or materials. Plastic tubes provide a convenient and efficient way to organize and protect various art supplies such as brushes, pens, pencils, and paint tubes. They are lightweight, durable, and often come with airtight caps, ensuring the longevity and safety of the stored materials. Additionally, plastic tubes are transparent, allowing artists to easily identify and access the supplies they need.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Pressure Pipe PN10&16 ASTM, AS,BS,ISO
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords