DN63mm HDPE pipes for water supply on Sale
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
1. Length: 6m, 12m or In compliance to your requests
2. Pipes are available in the form of coils or straight lengths
3. A comprehensive range of pipe fittings are always held in stock.
2.Packaging & Delivery
Packaging Detail: | standard packing for export or as requested |
Delivery Detail: | 1~5weeks |
3.size range
Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | |||
Wall thickness(mm) | Wall thickness(mm) | PE80 | PE80 | PE100 | PE100 | |
Nominal Outside Diameter(mm) | SDR17.6 | SDR11 | SDR17.6 | SDR11 | SDR17.6 | SDR11 |
20 | 2.3 | 3.0 | 0.132 | 0.163 | 0.133 | 0.164 |
25 | 2.3 | 3.0 | 0.170 | 0.211 | 0.171 | 0.212 |
32 | 2.3 | 3.0 | 0.222 | 0.278 | 0.224 | 0.279 |
40 | 2.3 | 3.7 | 0.283 | 0.430 | 0.284 | 0.432 |
50 | 2.9 | 4.6 | 0.438 | 0.666 | 0.440 | 0.670 |
63 | 3.6 | 5.8 | 0.686 | 1.053 | 0.689 | 1.058 |
75 | 4.3 | 6.8 | 0.975 | 1.470 | 0.980 | 1.478 |
90 | 5.2 | 8.2 | 1.411 | 2.130 | 1.419 | 2.141 |
110 | 6.3 | 10.0 | 2.084 | 3.159 | 2.095 | 3.176 |
125 | 7.1 | 11.4 | 2.670 | 4.098 | 2.684 | 4.120 |
140 | 8.0 | 12.7 | 3.347 | 5.108 | 3.364 | 5.135 |
160 | 9.1 | 14.6 | 4.368 | 6.705 | 4.391 | 6.740 |
180 | 10.3 | 16.4 | 5.549 | 8.474 | 5.578 | 8.519 |
200 | 11.4 | 18.2 | 6.817 | 10.451 | 6.853 | 10.505 |
225 | 12.8 | 20.5 | 8.596 | 13.228 | 8.641 | 13.298 |
250 | 14.2 | 22.7 | 10.611 | 16.268 | 10.666 | 16.354 |
280 | 15.9 | 25.4 | 13.274 | 20.396 | 13.343 | 20.502 |
315 | 17.9 | 28.6 | 16.804 | 25.818 | 16.892 | 25.953 |
355 | 20.2 | 32.3 | 21.398 | 32.861 | 21.510 | 33.033 |
400 | 22.8 | 36.4 | 27.164 | 41.706 | 27.306 | 41.924 |
450 | 25.6 | 40.9 | 34.320 | 52.688 | 34.499 | 52.964 |
500 | 28.4 | 45.5 | 42.311 | 65.135 | 42.533 | 65.476 |
560 | 31.9 | 50.9 | 53.169 | 81.583 | 53.447 | 82.010 |
630 | 35.8 | 57.3 | 67.134 | 103.347 | 67.486 | 103.888 |
4.size range (water pipe)
Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | |
SDR11 | SDR13.6 | SDR17 | SDR21 | SDR26 | SDR33 | |
Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | |
PE80 | PN12.5 | PN10 | PN8 | PN6 | PN4 | |
PE100 | PN16 | PN12.5 | PN10 | PN8 | PN6 | |
Nominal Outside Diameter(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) |
20 | 2.3 | |||||
25 | 2.3 | |||||
32 | 3.0 | |||||
40 | 3.7 | |||||
50 | 4.6 | |||||
63 | 5.8 | 4.7 | ||||
75 | 6.8 | 5.6 | 4.5 | |||
90 | 8.2 | 6.7 | 5.4 | 4.3 | ||
110 | 10.0 | 8.1 | 6.6 | 5.3 | 4.2 | |
125 | 11.4 | 9.2 | 7.4 | 6.0 | 4.8 | |
140 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 | 4.3 |
160 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 | 4.9 |
180 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 | 5.5 |
200 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 | 6.2 |
225 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 | 6.9 |
250 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 | 7.7 |
280 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 | 8.6 |
315 | 28.6 | 23.2 | 18.7 | 15.0 | 12.1 | 9.7 |
355 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 | 10.9 |
400 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 | 12.3 |
450 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 | 13.8 |
500 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 | 15.3 |
560 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 | 17.2 |
630 | 57.2 | 46.3 | 37.4 | 30.0 | 24.1 | 19.3 |
710 | 52.2 | 42.1 | 33.9 | 27.2 | 21.8 | |
800 | 58.8 | 47.4 | 38.1 | 30.6 | 24.5 |
5.FAQ
Q:What the Raw material?
A:We use 100%Korea material.
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:How do I bend the plastic pipe?
- If it's a small, thin plastic tube, put it in hot water, soft, bent, and then put in cold water. If it is a hard plastic or large pipe can be bent, roasted, or torch. I hope I can help you out...
- Q:What is the level of rigidity of plastic tubes?
- The level of rigidity of plastic tubes can vary depending on the specific type of plastic used, but generally, plastic tubes are known for their flexibility and ability to bend without breaking.
- Q:Can plastic tubes be used for medical applications?
- Yes, plastic tubes can be used for medical applications.
- Q:What is the thermal fuse sleeve of the wire mesh plastic composite pipe?
- Hot melt connection quota of plastic pipe.
- Q:Just curious, when there is only a bit of toothpaste left, I have to squeeze little by little from bottom up. But then after using it, I'll have to do the same thing next time around. Obviously the toothpaste has to settle down the tube. Why and how does it do that?
- The plastic material has internal stresses that retain the shape it was cast in originally. Since it is attached to a round head it tends to form a sort of flattened cone. The toothpaste moves back up the tube to fill the available space as it is a type of really thick fluid. The shape may also lead to the toothpaste moving upwards due to capillary action (similar to how water moves up a very thin straw) To combat this effect, you can buy a little squeezy thing that rolls over the tube to prevent the toothpaste from moving backwards, or you can fold/bend it over as you use it like many people do. I store mine upright on the cap so the toothpaste settles at the end I squeeze it out of. The tube also uses less counter space when you store it upright as compared to laid over on its side.
- Q:Are plastic tubes resistant to UV degradation?
- Yes, plastic tubes can be resistant to UV degradation depending on the type of plastic used. Some plastics, such as PVC and HDPE, have inherent UV resistance and are commonly used for outdoor applications where exposure to sunlight is likely. However, not all plastics are UV resistant, so it is important to choose the appropriate material for specific needs to ensure long-term performance and durability.
- Q:i leave my oil tubes in a clear plastic bin, but ive left it near the window and the sun hit em most of the day... but the tubes are like some sort of soft metal, maybe aluminum? So i mean, i know its never good to put anything in the sun for long, but the paints are in a tube where i think, sun wouldn't really affect em...as for heat. im not sure what that would do to em.
- I shouldn't affect it, unless it was really really boiling hot then i don't know if it would be very good. (40 degrees+) Other than that it should be fine!
- Q:Can plastic tubes be used for promotional packaging?
- Yes, plastic tubes can be used for promotional packaging. They are versatile, cost-effective, and provide a unique and eye-catching way to package and display products. Plastic tubes can be easily customized with branding, logos, and product information, making them an excellent choice for promotional purposes.
- Q:I got a new syrian hamster two and a half days ago, he has a big wire two storey cage with plastic tubes connecting the upstairs and downstrairs, he's spent mostly all of his time in the tube, taking all the bedding from his little house and his food in it and pooing a lot, I mean the tube is full of poo mixed with food and bedding. (I know this is normal) he's still really shy, he spooks easily, and he's not even been on his wheel yet but he's slowly coming around to me when I hand feed him, I haven't touched him yet though, just leaving him to it for a few days. Should I clean his tubes or is it too early? I don't want to stress him out but I read you are supposed to clean his cage every week and spot clean and clean his toilet area every day and his tubes are his toilet area and I'm seriously not joking when I say he poos a lot.
- I think that you should probably clean it out. Do it at night when he is not in the tubes so you do not disturb him. My hamster sleeps in an attachment that goes on the tubes and she does the same thing with the food, pooping, and peeing in there. She loves when I clean it out for her, I do it about every 2-3 days. If I do not clean it out and wait an extra day if I am busy or something she takes all of the bedding out of it and moves it to the regular cage area herself. So yes I do think that you should clean it, he will probably appreciate it!
- Q:i connected a plastic tube about 7 or 8 inchs long onto a butane can im wondering if when i push down on the can and put a match near it can the fire go back into the can explode
- Yes it will unless you have a regulator between the valve and the tube
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
DN63mm HDPE pipes for water supply on Sale
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords