DN225mm HDPE Pipes for Water Supply on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
Length: 6m, 12m or In compliance to your requests
Pipes are available in the form of coils or straight lengths
A comprehensive range of pipe fittings are always held in stock.
2.Packaging & Delivery
Packaging Detail: | standard packing for export or as requested |
Delivery Detail: | 1~5weeks |
3.Features:
· Facilitating high resistance to loadings, pressure and vacuum with high tensile strength,
· Enabling high resistance to corrosion,
· Not requiring cathodic protection,
· Less operating cost since cast pipes have larger nominal diameter than polyethylene pipes.
· Being the best pipe in case of an earthquake, with its ability of resilience and resistance to impacts without deformation,
· Long product life, exceeding 50 years,
· Preserving the quality of water with healthy interior coating.
4.size range
Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | |||
Wall thickness(mm) | Wall thickness(mm) | PE80 | PE80 | PE100 | PE100 | |
Nominal Outside Diameter(mm) | SDR17.6 | SDR11 | SDR17.6 | SDR11 | SDR17.6 | SDR11 |
20 | 2.3 | 3.0 | 0.132 | 0.163 | 0.133 | 0.164 |
25 | 2.3 | 3.0 | 0.170 | 0.211 | 0.171 | 0.212 |
32 | 2.3 | 3.0 | 0.222 | 0.278 | 0.224 | 0.279 |
40 | 2.3 | 3.7 | 0.283 | 0.430 | 0.284 | 0.432 |
50 | 2.9 | 4.6 | 0.438 | 0.666 | 0.440 | 0.670 |
63 | 3.6 | 5.8 | 0.686 | 1.053 | 0.689 | 1.058 |
75 | 4.3 | 6.8 | 0.975 | 1.470 | 0.980 | 1.478 |
90 | 5.2 | 8.2 | 1.411 | 2.130 | 1.419 | 2.141 |
110 | 6.3 | 10.0 | 2.084 | 3.159 | 2.095 | 3.176 |
125 | 7.1 | 11.4 | 2.670 | 4.098 | 2.684 | 4.120 |
140 | 8.0 | 12.7 | 3.347 | 5.108 | 3.364 | 5.135 |
160 | 9.1 | 14.6 | 4.368 | 6.705 | 4.391 | 6.740 |
180 | 10.3 | 16.4 | 5.549 | 8.474 | 5.578 | 8.519 |
200 | 11.4 | 18.2 | 6.817 | 10.451 | 6.853 | 10.505 |
225 | 12.8 | 20.5 | 8.596 | 13.228 | 8.641 | 13.298 |
250 | 14.2 | 22.7 | 10.611 | 16.268 | 10.666 | 16.354 |
280 | 15.9 | 25.4 | 13.274 | 20.396 | 13.343 | 20.502 |
315 | 17.9 | 28.6 | 16.804 | 25.818 | 16.892 | 25.953 |
355 | 20.2 | 32.3 | 21.398 | 32.861 | 21.510 | 33.033 |
400 | 22.8 | 36.4 | 27.164 | 41.706 | 27.306 | 41.924 |
450 | 25.6 | 40.9 | 34.320 | 52.688 | 34.499 | 52.964 |
500 | 28.4 | 45.5 | 42.311 | 65.135 | 42.533 | 65.476 |
560 | 31.9 | 50.9 | 53.169 | 81.583 | 53.447 | 82.010 |
630 | 35.8 | 57.3 | 67.134 | 103.347 | 67.486 | 103.888 |
5.size range (water pipe)
Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | |
SDR11 | SDR13.6 | SDR17 | SDR21 | SDR26 | SDR33 | |
Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | |
PE80 | PN12.5 | PN10 | PN8 | PN6 | PN4 | |
PE100 | PN16 | PN12.5 | PN10 | PN8 | PN6 | |
Nominal Outside Diameter(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) |
20 | 2.3 | |||||
25 | 2.3 | |||||
32 | 3.0 | |||||
40 | 3.7 | |||||
50 | 4.6 | |||||
63 | 5.8 | 4.7 | ||||
75 | 6.8 | 5.6 | 4.5 | |||
90 | 8.2 | 6.7 | 5.4 | 4.3 | ||
110 | 10.0 | 8.1 | 6.6 | 5.3 | 4.2 | |
125 | 11.4 | 9.2 | 7.4 | 6.0 | 4.8 | |
140 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 | 4.3 |
160 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 | 4.9 |
180 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 | 5.5 |
200 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 | 6.2 |
225 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 | 6.9 |
250 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 | 7.7 |
280 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 | 8.6 |
315 | 28.6 | 23.2 | 18.7 | 15.0 | 12.1 | 9.7 |
355 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 | 10.9 |
400 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 | 12.3 |
450 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 | 13.8 |
500 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 | 15.3 |
560 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 | 17.2 |
630 | 57.2 | 46.3 | 37.4 | 30.0 | 24.1 | 19.3 |
710 | 52.2 | 42.1 | 33.9 | 27.2 | 21.8 | |
800 | 58.8 | 47.4 | 38.1 | 30.6 | 24.5 |
- Q:Light enters a solid tube made of plastic having an index of refraction of 1.69. The light travels parallel to the upper part of the tube. (See the figure .) You want to cut the face AB so that all the light will reflect back into the tube after it first strikes that face.
- Hello The angle for total internal reflection is Θc = arcsin(n2/n1) in the case where n2 = 1 (air) Θc = arcsin(1/1.69) = 36.27° -- ans. this is the angle with the normal of the surface. The angle that you are asking for is 90°-Θc = 53.73° ---------- in the case where n2 = 1.333 (water) Θc = arcsin(1.333/1.69) = 52.06° and Θ = 90 - 52.06 = 37.94° -- ans. Regards
- Q:Considering it sort of a plumbing project... also, if possible, keep it as cost-effective as possible? Is there a particular fitting I need to use? And I want the tube to connect internally (tube is inside fitting) as opposed to externally.Thanks in advance!
- You would be looking for a Compression fitting that is suited for plastic tubing. Ask at your hardware store.
- Q:replacing fuel filler neck with jy replace it has 2 smaller tubes that change to plastic that are cut off 3
- my answer is try to check it out on auto repair shop..dude
- Q:I had pains in my vagina, so my Dr. had to see if there were any lumps that were causing the pain. He had to stick this tube thing up my vagina to look inside. It hurted really bad. My hymen isn't there anymore, so I was wondering if I was still a virgin?
- Yes you're still a virgin. You loose you're virginity when a penis is inserted into your vagina, or you have sex.
- Q:What is the weight of plastic tubes?
- The weight of plastic tubes varies depending on their size, thickness, and material composition. Generally, plastic tubes can range from a few grams to several kilograms in weight.
- Q:Steel wire mesh composite plastic pipe, how many meters a root?
- 6m is generally the standard section, you can also do 3M, 3M, then more flanges, but the transport is more convenient.
- Q:What are the disadvantages of welded steel pipe and plastic pipe?. More points, bonus points
- Compared with the seamless steel tube is cheap, but can not withstand the pressure, generally used in the pipeline. In the seamed tube pressure is calculated according to the thickness of the same seamless tube and not bear pressure tube (advantages) thickness more balanced seamed tube (CoNS) have bead in the use of a fluid no problem
- Q:Can plastic tubes be used for insulation purposes?
- Yes, plastic tubes can be used for insulation purposes. They provide a protective covering and can effectively insulate pipes, wires, and other materials to prevent heat loss or gain.
- Q:Are plastic tubes resistant to pressure?
- Yes, plastic tubes can be resistant to pressure depending on the type of plastic used and the thickness of the tube walls. Some plastics, such as PVC or high-density polyethylene (HDPE), are known for their ability to withstand high-pressure applications. However, it is important to consider the specific characteristics of the plastic material and the intended pressure range before determining its suitability for a particular application.
- Q:Can plastic tubes be used for electrical insulation?
- Yes, plastic tubes can be used for electrical insulation. Plastic materials such as PVC (polyvinyl chloride) or HDPE (high-density polyethylene) tubes have excellent electrical insulating properties and are commonly used in various electrical applications to protect and insulate wires, cables, and other electrical components.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
DN225mm HDPE Pipes for Water Supply on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords