Polished Porcelain Tile Yulip Stone Serie Pink Color CMAX68618
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 700 m²
- Supply Capability:
- 1000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Yulip Stone Serie Pink Color CMAX68618 is one of the most popular color of Yulip Stone Serie, which is one popular serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line&Packing
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
- Q: I‘m installing 13x13 floor tile on a slab. Any tips on how to do it right
- If your not overly familiar with doing tile a diagonal isn t the easiest to start on. Lay out and proper tools are a big help in your preplanning. Right size trowel and large enough wet saw and had cutter is a must. Get the longest straight site line and split the room in 1/2 with a chalk line. Lay tile back to the wall and figure the size of pc(pcs) you need. You can cut a few of these pcs as a starting point. Knowing you split the room you should be equal when you get to the other side. A perfect straight edge will help keep your lines straight. Use this on all sides as you build out from that wall and lay as though your doing a straight lay just that your on a 45 degree. Or if you are doing an open ended area , you can cut several tiles in 1/2 and work back. A bit trickier but overall look is better. Don t cut tiles directly in 1/2, you must cut just off center if this is a starting point. Very hard to do and takes experience. Any specific questions you can e mail me through my avatar and check my qualifications there. GL
- Q: What purpose does it serve? Is it safe to assume the tile will settle half of the trowel thickness? For example, if using a 1/4 inch trowel, will the tile settle 1/8 inch when set in place? Thanks for any help/advice!
- Guitar is mostly right. You need the correct size trowel to spread it uniformly to set the tile in place so the thin set will both bond the tile to your substrate and provide the correct coverage to support the tile . Different trowels for different applications. You don t rely on the tile settling into place you have to set it, slightly press it and use a slight twisting motion to get the coverage you need to conform to specs in the ATC tile hand book, Any questions you can e mail me through my avatar and check my qualifications there. GL
- Q: My friend‘s bathroom floor is light-colored marble tile. His new navy blue shower mat bled navy dye and stained the tile. It‘s pretty soaked into the tile and won‘t wipe off. Is it a lost cause to try to remove it, or does anyone have any ideas to get the stain out? Thanks a lot!
- Try cleaning it with some oxidizer but that can even result in minimizing the grace of your floor. Polishing it again may help, but you can call the marble installer for a review. He can tell you the better option to do away with the stains from your floors.
- Q: best way to install floor 12inch by 12 inch floor tile
- First you decide if you want a seam or a row of tiles in the middle. Make sure the floor is clean and without divots (fill in any holes). Drop a chalk line down the center of the room and lay a row of tiles dry (no stick) along the line to see how they look. You don't want one end to leave a sliver and the other end to leave almost a full tile - try to balance the ends that have to be cut. Now dry-lay a perpendicular row from the center to check the ends going across the room. Lay a full tile or its edge down on the chalk line. This first tile will be used to orient all your tiles so make sure you're satisfied with the placement. Then lay a whole permanent row of full tiles down the center. Now you have to decide if you want the tiles layed side by side or brick wall pattern. Next lay the perpendicular row down permanently. Now all you have to do is fill in the quadrants as far as you can go with full tiles. After all your full tiles are down, it's the cut ones that remain. Slide a full tile in place up to the wall and mark where you have to cut. Peel and stick tiles usually can be cut with a sheetrock knife and a metal straight edge or a good pair of shears. Some of the cuts can be tricky - I can't see them so you'll have to muddle through.
- Q: I need some tiles to replace on my roof. They type of tile, I‘m told is Santa Rosa tile and is made from a reddish orange color clay, does anyone know where to get this type of tile in central California?
- Tile roofs are far more common in your part of the country than they are in mine. Your best bet is to look for roofing supply businesses in your local yellow pages. If it turns out to be impossible to get the exact same tile, a substitute can always be found. If the tiles you need replaced are on a highly visible part of the house, consider removing tiles from another part of the house to make the repair match, and use the new tiles in the less visible area. Good luck with your repair.
- Q: What is the use of ceramic tile?
- Use: the construction of the wall to be wet (outside the wet dry), and to maintain a certain degree of flatness, uneven or extremely rough parts of the application of cement mortar and other materials leveling; grass-roots must remove the floating ash, oil, wax, so as not to affect the stick Knot tiles in 5 to 15 minutes after the move can be corrected. Water-cement ratio of about 1: 4, after mixing the binder should be used within 5 to 6 hours (the temperature is about 20 degrees); the mixed adhesive applied to the back of the adhesive brick, and then Press hard, until the plain so far. Due to different materials and the actual consumption of different, generally at least about 4.5 to 6 kg per square meter, paste thickness of about 2 ~ 3mm. Use of common sense: 1, deacetal type: vulcanization speed, transparency is good, but in the curing process Release of acetic acid; with a pungent odor, but also on the metal, coated glass and some inorganic materials corrosion.
- Q: How to use ordinary drill drill on the tiles to hang things hanging?
- Ordinary drill can, but must use a metal head of the hole drill (hardware store to sell). First with the tools to drill the center of the porcelain glaze broken, cracked on the line to facilitate the drill bit positioning, and will not slip on the tile, 6mm above the hole do not hit a bit, According to the required aperture and then drill again, the hole will not be broken.
- Q: How do I clean the grout on my tiled floor. It has become quite discoloured over the last two years, especially in the kitchen. I live in a company apartment and it is very important that it is kept sparkling clean. There are very pale, large, limestone tiles throughout with matching grout. Thank you.
- There is fairly new cleaning technology out that uses peroxide based cleaners, which do an excellent job if used on a regular basis. I have only seen it in the commercial sector so far, but it replaces alot of the cleaning supplies used for numerous tasks. Hopefully it will soon come out for residential use. The biggest upside? It is 100% environmentally safe. Go to a custodial supply distributor to see if they carry some. Spartan Chemical has a product called Clean by Peroxy.
- Q: Can a ceramic wall tile be applied directly to a greenboard surface with mortar or is a cement backer board required?Thanks for your help
- Yes you can just be patient and remove the loose tiles which should not be hard to do. The reason that they have turned loose is because of moisture behind the tiles. Be sure you have a good stable surface for the tiles that you put back to adhere to. You may have to lay a film of masonry of something to give you a solid surface to hold the replaced tiles. As for as glue, I would use a adhesive that is called F26 and it is multipurpose to reattach the tile. I will guarantee that those tile will never come off again.
- Q: Okay so i live in an apartment and i cant EVER get mant. out here to fix this... the stuff thats between the tiles is missing and it looks gross and then the white rubber stuff that sits between the tub and the tile is coming off in random places.... what is this stuff called and would i be able to fix this junk myself???The white stuff that connects the tubs looks like that white stuff they use to connect the base boards to the hardwood floor...
- White Shower Tiles
Send your message to us
Polished Porcelain Tile Yulip Stone Serie Pink Color CMAX68618
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 700 m²
- Supply Capability:
- 1000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
