NN3032K Double Row Cylindrical roller Bearings mill roll bearing
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification of Double Row Cylindrical roller bearings:
Double row Cylindrical roller bearings belong to separable bearings, whose inner and outer rings are linearly contacted with rollers. They have small friction coefficient, bigger capacity of bearing radial load and are applicable to both bearing heavy load and impact load and high-speed rotation. Cylindrical roller bearings have the advantages of compact structure, strong stiffness, big bearing capacity, small deformation after loaded etc.
CNBM has already successfully developed split cylindrical roller bearings which can be freely installed at any time and any place, to meet the demand of driving and conveying rollway bearings at cooling area of continuous casting. CNBM also can provide special cylindrical roller bearings according to requirement of customers.
Product Application:
- Iron and steel metallurgical industry
- Medium and large motor
- Generator
- Combustion engines
- Machine tool spindle
- Speed reducer
- Loading and unloading machinery and all kinds of industrial machinery
Double row cylindrical roller bearings
- NN double row cylindrical roller bearings
This kind of bearings with inner rid, no outer rid. This assembly part can be separated from another ring, and they have larger radial load capacity than other single row cylindrical roller bearings with the same size, but the axial or housing is free axial displacement, so this kind of bearings can only bear the axial load.
- NNU, NNU…K double row cylindrical bearings
NNU,NNU...K type bearings with outer rid, no inner rid. There are tow kinds of holes, one is cylindrical hole, and another is tapered hole. Axial or housing is free axial displacement, so this kind of bearings can not bear the axial load. But these kind of bearings have larger radial load capacity than other single row roller bearings with the same size.
- NUP single row cylindrical roller bearings
NUP type bearings with double outer rid, single inner rid and loose rid, this design is possible to limit the axial displacement of the shaft or the housing in double direction within the scope of the axial clearance. in addition they mainly used to bear radial load, also can withstand diameter, the axial union load. Therefore this NUP suitable for fixed end bearings.
- NNCF double row cylindrical bearings
NNCF type bearings with three inner rids and one outer rid. They can take a direction axial positioning. There is a fixed ring in the other side of the outer rid, it can make bearing keep as one.
Double Row Cylindrical Roller Bearings Catalogue:
Desiganations | Basic load rating KN | Principal dimensions | Spead ratings rpm. | Weight | |||||||||||
Cr | Cor | d | D | B | r | Ew.Fw | Grease | Oil | kg | ||||||
NN3032K | 345 | 675 | 160 | 240 | 60 | 2.1 | 219 | 3800 | 3200 | 8.39 | |||||
NN3032KTN1 | 345 | 335 | 160 | 240 | 60 | 2.1 | 219 | 3800 | 3200 | 7.86 | |||||
NN3032K/W33 | 345 | 675 | 160 | 240 | 60 | 2.1 | 219 | 3000 | 2200 | 8.38 | |||||
NN3032K/YB2 | 345 | 675 | 160 | 240 | 60 | 2.1 | 219 | 3000 | 2200 | 8.39 | |||||
NN3032 | 345 | 675 | 160 | 240 | 60 | 2.1 | 219 | 3000 | 2200 | 8.38 | |||||
NN3034K | 435 | 860 | 170 | 260 | 67 | 2.1 | 236 | 3600 | 3000 | 12.9 | |||||
NN3034/YA8 | 435 | 860 | 170 | 260 | 67 | 2.1 | 236 | 3000 | 2200 | 13.3 | |||||
NN3036K | 555 | 1090 | 180 | 280 | 74 | 2.1 | 255 | 3400 | 2800 | 16.9 | |||||
NN3036 | 555 | 1090 | 180 | 280 | 74 | 2.1 | 255 | 2800 | 2000 | 16.9 | |||||
4382936 | 337 | 703 | 180 | 250 | 69 | 2.3 | 201 | 2800 | 2000 | 9.8 | |||||
NN3038K | 565 | 1140 | 190 | 290 | 75 | 2.1 | 265 | 3200 | 2600 | 17.9 | |||||
NN3038K/W33 | 565 | 1140 | 190 | 290 | 75 | 2.1 | 265 | 2600 | 1900 | 17.1 | |||||
NN3038 | 565 | 1140 | 190 | 290 | 75 | 2.1 | 265 | 2600 | 1900 | 18 | |||||
NNU4938B-W33 | 560 | 1250 | 190 | 260 | 69 | 3 | 212 | 2600 | 1900 | 11 | |||||
NNU6038 | 1260 | 3200 | 190 | 290 | 180 | 2.1 | 219 | 2600 | 1900 | 43.6 | |||||
NN3034K | 675 | 1340 | 200 | 310 | 82 | 2.1 | 282 | 3000 | 2400 | 22 | |||||
NN3034 | 675 | 1340 | 200 | 310 | 82 | 2.1 | 282 | 2400 | 1900 | 22.1 | |||||
NN3044K | 795 | 1610 | 220 | 340 | 90 | 3 | 310 | 2800 | 2200 | 30.1 | |||||
NN3044K/W33 | 795 | 1610 | 220 | 340 | 90 | 3 | 310 | 2200 | 1800 | 30 | |||||
NN3044 | 795 | 1610 | 220 | 340 | 90 | 3 | 310 | 2200 | 1800 | 31 | |||||
NN3048K | 810 | 1690 | 240 | 360 | 92 | 3 | 330 | 2600 | 2000 | 32.7 | |||||
NN3048 | 810 | 1690 | 240 | 360 | 92 | 3 | 330 | 2000 | 1700 | 31.6 | |||||
482752U | 605 | 1500 | 260 | 360 | 80 | 2.1 | 282 | 1600 | 1900 | 28.2 | |||||
NN3056K | 1060 | 2290 | 280 | 420 | 106 | 4 | 384 | 2200 | 1800 | 49.7 | |||||
NN3056 | 1060 | 2290 | 280 | 420 | 106 | 4 | 384 | 1700 | 1400 | 52.3 | |||||
3182160 | 1290 | 2790 | 300 | 460 | 118 | 4 | 418 | 1200 | 1500 | 76.2 | |||||
3282160 | 1290 | 2790 | 300 | 460 | 118 | 4 | 418 | 1200 | 1500 | 77.9 | |||||
31821/600 | 4050 | 9850 | 600 | 870 | 200 | 6 | 805 | 600 | 800 | 384 | |||||
32821/600K | 4050 | 9850 | 600 | 870 | 200 | 6 | 805 | 600 | 800 | 403 | |||||
31821/630 | 4350 | 10600 | 630 | 920 | 212 | 7.5 | 850 | 550 | 750 | 438 | |||||
32821/630K | 4350 | 10600 | 630 | 920 | 212 | 7.5 | 850 | 550 | 750 | 460 | |||||
NN3030K | 330 | 650 | 150 | 225 | 56 | 2.1 | 206 | 4000 | 3400 | 7.7 | |||||
NN3030/YA8 | 330 | 650 | 150 | 225 | 56 | 2.1 | 206 | 4000 | 3400 | 7.7 | |||||
NN3030 | 330 | 650 | 150 | 225 | 56 | 2.1 | 206 | 3200 | 2400 | 7.75 | |||||
NN3030/C9 | 330 | 650 | 150 | 225 | 56 | 2.1 | 206 | 3200 | 2400 | 7.75 | |||||
NN3030/C9YA8 | 330 | 650 | 150 | 225 | 56 | 2.1 | 206 | 3200 | 2400 | 7.79 | |||||
NN3030K/C91W33 | 330 | 650 | 150 | 225 | 56 | 2.1 | 206 | 3200 | 2400 | 7.7 |
- Q:Attention problems of cylindrical roller bearings
- 1. The installation of bearings must be carried out in a dry, clean environment. Before installation, the machined surface of the shaft and shell, the shoulder end, the groove and the joint surface shall be carefully inspected. All mating surfaces must be carefully cleaned and removed, and the cast surface must be clean. 2, before the installation of bearings, should be cleaned with gasoline or kerosene, dry after use, and ensure good lubrication, bearings generally grease lubrication, oil lubrication can also be used. Grease lubrication, grease, anti rust, extreme pressure and other excellent greases should be used. Grease filling capacity for bearings and bearing box volume of 30%-60%, should not be too much. Double row tapered roller bearing and water pump shaft bearing with sealing structure have been filled with grease, which can be used directly by users and can not be cleaned again. 3, bearing installation, must be applied equally in the circumference of ferrule end face pressure to press into the ring, and may not directly tap bearing end face to the top tool, so as not to damage the bearing. Small amount of interference in the case, at room temperature can be used to suppress sleeve bearing ring face, beating with a hammer sleeve, the sleeve will be pressed into the ring balance. If installed in large quantities, use hydraulic press. When pressing, the outer end surface of the outer ring and the outer shoulder of the shell face shall be ensured, and the inner ring end face is tightly pressed with the shoulder end of the shaft platform, and no gap is allowed.
- Q:Why does cylindrical roller bearings fail abnormally?
- 5, improper reinforcement of uranium bearing seat, so that the bearing capacity of the axle is uneven, the bearing seat is provided with holes, or some fasteners, such as a compression screw, etc., are supported, and the supporting parts are provided with grooves or printing places near the roller track of the cylindrical roller bearings.
- Q:In the car there is a cylindrical roller, the size of the diameter of 25mm, the outer diameter of 32mm, width of 9.5mm, who knows what the standard size, have direct purchase Mody, thank you!
- This could be a car only bearing! NSK sample short column can not find the corresponding model!
- Q:Full use roller bearings
- INA full capacity roller bearings have many uses and many applications. Germany FAG bearing group global production of rolling bearings and linear products leading enterprises, not only FAG bearings of good quality, but more importantly, FAG industrial services. In order to extend the life of the railway axle box bearing unit, it is decided that the new FAG axle box bearing unit industry service will be added. We will go to Shanghai FAG bearing China general agent to learn about FAG new axle box bearing units, reprocessing industrial services and other industrial services. The FAG industrial services reprocessing service itself includes thorough cleaning of all bearings, as well as inspection of the dimensions and functions of the entire bearing units. Will re adjust the crankcase clearance, re lubrication SKF bearings, any wear parts will be replaced, if requested by the client, bearing data can also be recorded in the database, for future tracking and review.
- Q:The thrust cylindrical roller bearings do not need the bearing seat, and the thrust bearings, shaft rings and seat rings on our unit are all in the bearing seat, often broken. The rotation of the 1. shaft in the bearing seat will not be affected, moreover, the shaft will have radial runout. 2. do not use the bearing seat, usually how to refuel?.Are there any field installation drawings or data on thrust bearings?. Thanks a million!
- In general, this kind of bearing does not use the bearing seat
- Q:My notes is the former has a taper hole on the cone position preload, the latter is a nut. But the online information seems a little different. Are the preload methods for two direction thrust angular contact bearings and angular contact ball bearings the same?
- The latter is mainly used as a precision screw shaft for the radial motion and axial runout requirements are very strict, generally used when they are two back-to-back, when pre tightening have strict requirements, general requirements for the radial motion and axial runout should not exceed 5 per thousand mm.
- Q:What are full cylindrical roller bearings?
- Full cylindrical roller bearingCommon cylindrical roller bearings1, single row full cylindrical roller bearingsNCFNJG2 、 double row full cylindrical roller bearingNNCLNNCFNNCNNFTwo, not common full cylindrical roller bearings1, full spherical cylindrical roller bearings2, CARB ring roller bearings
- Q:The Russian bearing suffix No. ZST is a cylindrical roller bearing
- The suffix code is not used to distinguish the bearings, but it helps to explain the structure of the bearings and the material.
- Q:KOYO cylindrical roller bearings, //KOYO cylindrical roller bearings, how to determine the accuracy level?
- Bearing accuracy grade standards for, divided into 0, 6X, 6, 5, 4, 2, six grades.The accuracy of bearings is increased in order of magnitude 0, which is adequate for general 0, but requires 5 or higher accuracy when used in other conditions or situations.In most cases, it is sufficient to apply KOYO bearings (tolerance grade PN) with general dimensional accuracy and rotational accuracy. When higher requirements are required, the bearings require higher levels of accuracy, for example, the spindle axis of the machine toolBearing. In order to achieve higher precision requirements, the standard specifies the tolerance levels of P6, P6X, P5, P4 and P2. KOYO also specified P4S, SP and UP tolerances for some special bearings in accordance with company standards.
- Q:What are the components of cylindrical roller bearings?
- Cylindrical roller bearings are usually guided by two blocks of a bearing ring. The cage, roller, and guide ring form a composite, generally separable bearing.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
NN3032K Double Row Cylindrical roller Bearings mill roll bearing
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords