Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 2500000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
1. Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire Description:
Galvanized Iron Wire has the characteristics of thick zinc coating, good corrosion resistance, firm zinc coating, etc.
Galvanized Iron Wire mainly used in construction, express way fencing, binding of flowers and wire mesh weaving. Galvanized iron wire according to manufacturing technique, it includes hot-dipped galvanized iron wire and electro galvanized iron wire. Mainly telecommunication equipment and materials, medical equipment and device, weaving of wire mesh, steel rope, and filtration mesh, high-pressure pipe, construction, arts and crafts.
2.Main Features of Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire :
• Use widely
• Corrosion- resistant
• Durable
• Practical use
• Beauty Surface
• Versatile
3. Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire Images
4. Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire Specification
Chemical composition | C | Mn | Si | S | P |
Guarantee value | ≤0.12 | 0.3~0.6 | ≤0.35 | ≤0.035 | ≤0.040 |
Test Item | Rm(MPa) | ReL(Mpa) | A(%) | KV2(J) | KV2(J) |
Guarantee value | ≥420 | ≥330 | ≥17 | -(normal temperature) | -(0°C) |
General result | 460~540 | ≥340 | 18~26 | 50~80 | ≥47 |
5.FAQ
We have organized several common questions for our clients,may help you sincerely:
①How about your Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire?
One of the most biggest manufacturer & supplier of wires and wire mesh,is a large-scale professional UAE Market Electric Galvanised Wire BWG 20 0.7mm Hot Dipped Galvnised Wire factory in China. Annually more than 10000 tons wires and wire mesh are exported to markets all over the world. Different kinds of wires and mesh are available according to customer’s requirements.
②What is your Technical Information of Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire?
1).Material: super carbon steel
2).Processing by drawing, hot-dip zinc-plating
3).Standard wire gauge from 8# to 24#
4).Thick zinc-coating layer
5).Super in corrosion resistance
6).Firm coating layer
7).Custom size available
Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire
③How long can we receive the product after payment?
In the purchase of Galvanized Iron Wire within three working days, We will arrange the factory delivery as soon as possible. The pacific time of receiving is related to the state and position of customers. Commonly 15 to 20 working days can be served。
Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire
- Q:thats how my after market stereo is hooked up..i just got a system and was wondering if i join the remote wire to the accessory would it be ok? even if the accessory is already joined with the illumination
- You need to first disconnect the accesory wire on the aftermarket radio from the illumination wire from the car harness if you are using hose connection to turn on the radio. You need to connect the accesory wire from the aftermarket radio to the accesory wire from the car radio harness, if you are using a wire harness then it would be the red wire and if the factory radio harness is cut then u'll need a test light to locate the accesory wire. On the aftermarket radio harness/plug locate the blue/white wire that's where u will need to connect the remote wire to, in order to turn your amp on and off. Don't connect the remote wire to the illumination wire from the car, or the radio harness.
- Q:I have a minivan with a flat 5 pin wiring connecter at back. We bought an old utility trailer with no wiring. It has the two rear lights, one on each side with 2 wires sticking out of each. We got the flat 5 pin trailer connector to connect to the van and bought a long piece of cable which has the white, brown, green and yellow wires in it. Where do I connect what? I have the wire that connects to the van with the four colours and 2 wires coming out of each light for the trailer.Thanks!
- ok wiring 101 just think of the road yellow line left side =left hand signal. green grass right side of road = right hand signal. brown = leave the dirt behind =running lights .white ground your trailer is wired
- Q:whenever i try to connect two electrical wires by twisting them together, i hold the two wires paralell to eachother, grab them with needle nose pliers and turn it. it never seems to work though! if anything, it just breaks the wire and i have to strip more insulation! what am i doing wrong? thx
- What gauge is the wire? Is it stranded or solid? Each type of wire has its own method. You can't really twist solid wires because as you have seen, they stress and break. If you do get them to connect they can loosen up create a bad connection. Electronic places have special connectors for these. Stranded wires are not usually a problems with twisting.
- Q:for california electrical code, am i limited to insert no more than one wire per knockout on a box ?
- no. the number of wires in the box is restricted based on the volume of the box but the number of wires entering a knock out is restricted by the size of the conduit or the cable type connected to the knock out.
- Q:What is a wire transfer? Is it when you can send money from one bank to another diferrent bank far away?
- A wire transfer is the electronic transfer of funds from one financial institution (i.e. bank) to another financial institution (i.e. another bank).
- Q:I have this ipod cord in my car to play music off of, and at first it started cutting out. I would move the wire in a specific spot to a position to where it would work. Then eventually it just stopped working all together, so im assuming the wires inside have been damaged. Now as i said before in a specific spot so im pretty positive i know where it is broken at, but ive never actually spliced a wire, or soldered before. This is where i need help. What tools and materials will i need to fix the wire? Also, how would i fix it? Thanks for the help in advance!
- The wires in those little patch cords and headphones and stuff are often very fine and hard to splice or solder. You could get you some wire cutters and wire strippers and a soldering iron and some electrical tape or shrink wrap and go at it, but it would probably be just as well to get another cord.
- Q:how do i wire my sensor to my light
- The sensor is wired in-line. That means the wire coming from the source of electrical current is the starting point, the sensor IN wire hook to the same colored wires from the source wires, and the sensor OUT wires hook up to the same colored wires on the light. The sensor is now getting power, and passing it on to the light.
- Q:alright, 5 speakers with 4ohm svc, what would my wiring options be?
- With 5 speakers there won't be a symmetral wiring pattern for even power distribution. With 4 it would be 2 pair in parallel with both sets in series for a 4 ohm final load or all 4 in parallel for a 1 ohm final load.
- Q:What's the best kind of wire to use that can stand being kilned?
- that really depends what you want to do and how high you are going to fire. Generally nichrome 80/20 wire should be OK until cone 9. Then there is Kanthal which will withstand even higher temperatures but is more expensive than nichrome. You could get either probably in electronics supply houses. If you do lowfire, maybe up to cone 06 or lower steel will probably be OK. The surface of the steel will oxidise and so get clearly thinner, keep that in mind. Generally your wire and the clay should not be in direct contact because they have different thermal expansion coefficients. Depends how rigid your wire is if it will lead to major damage to your piece. But if you wrap your wire with paper before you put clay around it it is probably OK as long as you don't enclose the entire thing with clay into a hollow space. But it also depends on what exactly you are trying to do, e.g. what kind of clay you are using. Mostly people use wire with clay for making beads. If that's what you are doing you can also look up bead making techniques.
- Q:when wiring subs to different ohm levels, does is matter what kind of speaker wire you use to connect to the + and - terminals? i mean like gauge wise of the speaker wire and such.
- i'd use the same as the rest of teh wire, and always go larger never smaller. the cost of wire for teh few feet needed in a car, seams silly to me to go cheap... most places allow you to buy it by the foot. i usually use 12 ga for subs and 16 for mains..
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Electro GI Iron Wire Hot Dipped Galvanized Iron Wire PVC Coated Low Carbon Wire
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 2500000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products