CNBM Oil Pump
- Ref Price:
-
$45,544.79 - 65,443.63
/ unit
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 Per Month unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
CNBM Oil Pump
1. Application of CNBM Oil Pump
1). Oil refinery, petrochemical industry, coal processing, lower temperature engineering,
2). Chemical industry, paper and pulp industry, sugar industry,
3). Sea water supply and desalination plant, Ship and offshore engineering,
4). Pharmaceutical industries, environment protection engineering
Medium:
Various acid, alkali, salty solution, liquid petroleum products, organic compound corrosive and certain percentage particle contained, crude oil and its products.
2. Specifications of CNBM Oil Pump
Size: DN 25 to 400 mm
Capacity: Q: up to 2600M3/H
Head: H: up to 300Meter
Operating pressure: P: up to 2.5Mpa
Operating temperature: T: -80 to 450
Speed: n: 2950/1475rpm
Pumping media
Sulphric acid, nitric acid, hydrochloric acid, phosphoric acid, various organic acid and inorganic acid at various temperature
Sodium hydroxide, sodium carbonate and alkaline liquid at various temperature,
All kinds of sale solution
Various liquid petrochemical products, organic compound and corrosive raw materials
3. Description of CNBM Oil Pump
Horizontal single stage radial split volute casing pump with feet, end suction and radial upward discharge, Hydraulic balance provided by front or rear wear rings and balance holes, shaft seal by packing or mechanical seal, connections for cooling, flushing or seal liquid, Pump clockwise rotation viewed from the driven end
The pump is designed and made under API610, latest edition, and VDMA2497
Flange is made as per DIN or AISI standard
- Q: Is the car oil pump electrically controlled?
- Mechanical, with gear pumps and rotary pumps
- Q: My car oil pump pressure is low, engine oil alarm idling always ring, how to do?
- 1, lack of oil2, the oil leak, resulting in oil spills3. engine oil sensor fault causes oil lamp to be often bright
- Q: What's the cause of the indicator light of the car oil pump?
- It's the oil pressure indicator, not the oil pump indicator light.This indicator is used to show the pressure of the engine oil. Open the key door. When the vehicle starts to self check, the indicator light is on and off after starting. The indicator light is always on, indicating that the engine oil pressure is lower than the required standard, you need to repair.If it's on all the time, just see if the oil is enough. How about the oil pressure switch, the wiring harness and the plug?. If it is flashing at some point, the possibility of a problem with the oil pressure switch itself is greater.
- Q: A S195 diesel engine has changed main shaft, main shaft tile, engine oil pump, connecting rod tile, engine oil also does not burn, engine oil power is also new, half an hour indicator will not come up, beginning indicator pressure is very enough. No, the spindle will go down in 5 minutes. It has been broken several times. You've been driving for ten or twenty years. Can you do me a favor?Don't pull up indicator will score, gear edge
- The only reason the indicator does not come is that the oil pressure of the indicator is not enough. According to this principle, the reasons for insufficient oil pressure are eliminated one by one. It should be noted that the replacement of new parts may not necessarily be good. As long as the oil pressure is not enough, or the oil pump problem, or the problem of oil, or that there is a certain place of normal leakage of oil, causing the arrival indicator oil pressure is small.First make sure the oil pump, the method is very simple, to another machine try glance. When installing the oil pump, be sure to pay attention to the leak. Check whether the oil is fake and shoddy. By the way, check the indicator and you'd better change it to another machine. If the above is no problem, you can basically determine the normal leakage of oil. For many reasons the oil leakage is very complex, with the main bearing and the crankshaft, the new fit is not necessarily good, with the clearance of additional oil, there is the crankshaft oil plug, whether tightening. As long as you check the oil path carefully, you will find the cause of insufficient pressure.
- Q: What will happen to the old Bora oil pump?
- Hello, oil shortage occurs, I suggest you check as soon as possible, oil is the engine's blood, there is not enough pressure to clean the oil, the engine will soon be damaged. It is recommended to go to the repair shop to check the oil pressure immediately. If the pressure is not enough, the vehicle will not be opened for the time being. The pressure will be enough, it may be a pressure switch or a related line fault. Or advise you to overhaul as soon as possible, so as not to cause great losses!
- Q: TOYOTA oil pump not going off
- Replace a lot of oil, try to see if the oil can not be oiled to prove that the oil road is blocked or the oil pump screen is blocked
- Q: Audi a6l2.0 engine oil pump timing, right?
- A little, see, simple
- Q: Do you need to disassemble the chain for replacing the oil pump of TOYOTA corolla?
- Hello, you need to remove the timing housing, you do not need to remove the chain.
- Q: How to solve the blockage of the automobile oil pump?
- Remove the oil pan, remove the oil pump and clean the strainer with gasoline
- Q: What are the fuel pump inspection items for diesel generator sets?
- The main inspection items are as follows:1, the outer rotor and pump casing pump clearance;2, the internal and external rotor meshing clearance;3, rotor and pump cover face clearance;4. Flatness of pump cover.[diesel generator unit oil pump inspection notice]1, check valve planes such as abrasion, sag, pitting phenomenon, application of grinding paste on the plate grinding, severe cases should be renewed.2. The surface of the one-way valve seat on the shell should be replaced when worn or not smooth.3, the top rod and the top sleeve wear seriously, so that the gap increases, the seal becomes worse, diesel leakage seriously, you need to replace with the shell, or choose the enlarged size of the top rod, but need to pass mutual research.4, the coarse strainer tubing joints within the core, and easy to be cottony sundries plug, effect of fuel supply, it should always pay attention to the clean fuel and remove the dirt on the filter core.5, the hand pump piston rubber ring damaged, should be replaced in good time. After the center of gravity of the oil pump is assembled, the moving parts of the piston, the ejector rod and the other parts of the oil pump are required to be in good motion during the whole journey, and no blocking and blocking are allowed. The hand pump should be light and flexible. Pay attention to the installation of the one-way valve spring. The check valve spring must be accurately embedded in the spring slot.
1. Manufacturer Overview
| Location | Liaoning,China |
| Year Established | 1990 |
| Annual Output Value | |
| Main Markets | Russia, Iran, north Korea, Vietnam, Sudan |
| Company Certifications |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b) Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
CNBM Oil Pump
- Ref Price:
-
$45,544.79 - 65,443.63
/ unit
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 Per Month unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
