Mini Construction Machinery 708 wheel loader
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 15 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description
0.6cbm standard bucket with teeth
Chanchai 490 Engine(38KW) with pre-heater
Hydraulic Transmission with torque converter
Adjustable steering wheel
Tipping cabin is easy to repair
Cabin with Warm Heater and Adjustable Seat
Mechanical joystick
Standard tires 8.25-16
Features:
Min. fuel consuming rate | 37.5 | |
Transmission system | Model of torque converter | YJ240 |
Type | Single-phase single-stage radial-inward turbine triples | |
Gearbox type | Fixed-spindle power shift | |
Gear shift | 4 | |
Max travel speed(km) | 16 | |
Hydraulic system | Valve distributing working | ZL15 |
Working pump | CBG2040 | |
Pressure of working hydraulic system (Mpa) | 16 | |
Steering system | Type | Articulated hydraulic steering
|
Max. turning angle | 35±1° | |
Min turning radius(mm) | 4500 | |
Min ground clearance(mm) | 250 | |
Brake mode | Oil Brake(Vacuum Booster) | |
Tires | Standard tires | 8.25-16 |
Optional tires | 12-16.5 or 14-17.5 | |
Specification
Model | YN710 | |
Specifications: | ||
Basic Parameter | Overall weight(kg) | 3500 |
L×W×H(mm) | 5100x1700x2530 | |
Rated bucket capacity(m3) | 0.6 | |
Rated load(kg) | 1000 | |
Max dump height(mm) | 2650 | |
Max. breakout force(KN) | 36 | |
Wheel base | 2005 | |
Tread | 1400 | |
Max grade ability | 60° | |
Max dump reach | 1020 | |
Performance of bucket being set level | Yes | |
Total of three time: lifting, dumping, lowering(s) | 8.5 | |
Engine | Model | Changchai 490 with pre-heater |
Type | Inline arrangement, Water cooling, four-stroke, 4-cylinder | |
Rated power(kw) | 38 | |
Rated speed(r/min) | 2200 | |
FAQ
Packing details | 1pcs/20GP 3pcs/40HQ |
Delivery time | 15 days upon receipt the deposit |
Warranty time | 1 year since the BL date |
Optional Attachments
Quick Hitch
Hydraulic 3-way Pilot Joystick
Electronic joystick
Reserving Camera
Pallet Fork
A/C(Air Conditioner)
Grass Fork
Snow Blade
Snow Blower
Wide tires 12-16.5
- Q:We do have one lined up already.
- It depends entirely on the area of the country you are in, the weather, and the excavator you have chosen. There is no average wait time. If you are building your own home, you are at a disadvantage with an excavator, and will be at a disadvantage with every subcontractor you deal with during the construction of your home. You are only building one home, while the builders they normally work for build multiple homes per year. Every subcontractor will put off your job and give priority to the builders who hire them month after month and year after year. Unfortunately, you may be a one shot deal. Good luck with your situation.
- Q:So I got a new job and today was my first day. It was horrible, I got no training and it is a pretty dangerous job, it's installing sewer and drainage piping. I don't mind hard work, but I had no idea what to do and felt useless. My co workers are either assholes or idiots. My foreman is nice, but he hasn't trained me to do anything and expects me to figure everything out on my own.So I'm thinking of just not showing up tomorrow. I got a call about another job today and did not answer because it wasn't safe to do so at the time, but they left a message and asked me to call back, so I think I will tomorrow. Thoughts?Also I can't go in tomorrow and call about the other job because I'm always in a trench with excavators all around.
- Just don't show up! Your life is worth more than a job, this job. Go for the other job! Your safety is all that should matter to you.
- Q:How much water % is allowed in Hyd Oil , used in Excavators?
- Well, any water in your hydraulics will cause you problems, including corrosion. And if your running the unit hard, you might cause the water to turn to steam. My suggestion would be to have your hydraulics flushed and replaced if you have water in it.
- Q:What is included in an amalgam tray setup in order from left to right?
- Here's my setup: Mirror, explorer, endo explorer, locking cotton pliers, cotton pliers, small spoon excavator, large spoon excavator, Dycal instrument, amalgam carrier, plugger, discoid cleoid, ball burnisher, acorn burnisher, plastic instrument, spatula, scaler and articulating paper. As you can see, in addition to the 'regular' amalgam instruments, we also have what would be needed if we had to recement/insert a crown or do a post and core in addition to the filling.... we're prepared and won't need to open up another setup... Hope this helped. :)
- Q:I used to believe that it was likely that humans were here at least 40,000 years ago and I assumed the lack of evidence for earlier people was because they were probably not looking in the right place. Since then, I earned my degree in geology and learned that most of North America was either covered in ice or nearly uninhabitable from 80 thousand to about 12 thousand years ago.
- Monte Verda in Chile is not an accepted site because the evidence from that site washed away shortly after its first discovery. Sites such as Meadowcroft, Cactus Hill, and Topper point to a little less than 20000 BP. as the date. But these sites are controversial too. Not any evidence for anytime beyond this. There is a site on the West Coast, Arlington Springs I think that has pretty good dates around 17000 BP, but that is about it.
- Q:People Of The Hunting Section! I need some basic help. I sometimes do a bit of backwoods reloading on shotgun shells and I am trying to make a few door breeching rounds. The door is a 1/8quot; mild steel wrapped hollow door with inside hinges. I need a basic load / shot pattern to be able to penetrate the door and get it off the hinges. We have already tried to kick it down and only succeeded in a broken ankle. I was thinking of just turning either a copper or steel slug and just going at it, but I figure it would be worth some different opinions.Thank You!
- 1/8ths okorder /
- Q:This is the link of a cake that i found. I am wondering if anyone has any other ideas of a cake. i like this type of cake, you know where its not in a quot;regualr cake shapequot; I am seeking any and all of your ideas.. Thanks for all that helps Not sure if the link will show on here.. Search for quot;Edible Excavatorquot; thanks a bunches all
- There are a lot of cool cakes out there on the internet. You can go to kraft kitchen, and they have recipes and videos to show you how to make kids cakes. The cake you were looking at is a cute cake, but I wonder how many people it serves, maybe try making a train.
- Q:Modern 335-7 excavator hydraulic oil temperature at how many degrees normal?
- 6 、 adjust the system pressure according to the requirements, avoid the pressure is too high, make sure the safety valve, overload valve and so on in normal condition work7, regular maintenance, avoid other parts wear too much to cause leakage. Timely replacement of volumetric efficiency of the hydraulic pump, because of its internal leakage will make the pump shell temperature rise, accelerate the system heating up8, regular inspection of engine speed and fan belt tension degree, so that fans keep enough speed, adequate heat dissipation, so that the equipment in good running condition
- Q:the health risks are from it being there
- You may just need you tank or pit pumped, or you could have a broken line. Call an excavator who does that kind of work.
- Q:i threw a track and going to try to replace myself
- You must remove a pin to separate track. Lay track in position so you can get a come along hooked to pull the track together on the top, not on the ground. Replace pin and your on your way.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Mini Construction Machinery 708 wheel loader
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 15 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
