DIN Standard End Suction Water Pump for Water Irrigation
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
End Suction Centrifugal Pump
1.Structure of End Suction Centrifugal Pump Description
End Suction Centrifugal Pump complies fully to the European Standard BS EN733 / DIN24255 of performance and dimensions. They are used for pumping clean water or liquids similar to water, achieving wide application on plants, mines, city water supplies, air-conditioning coolers, firefighting system and irrigation. Pumps of the same model have different performance levels basing on different diameter after impeller trimming. Overall the whole series, there are only four sizes of shaft and five of bearing housing. As long as their bearing housings are of the same size, different pumps can interchange chief parts such as shaft, shaft sleeve, shaft seal, impeller nut, etc.
End Suction Centrifugal Pump is also very easy to be installed and maintained. Back pull-out design, driven through flexible coupling, so that pump casing and motor can remain in position while other spare parts are removed.
2.Main Features of the End Suction Water Pump
• very easy to be installed and maintained
•Back pull-out design
•Driven through flexible coupling
•Customized design is available, OEM and ODM are welcomed.
•Horizontally and vertically installation as different pipeline system
3.End Suction Water Pump Specification
4.Picture of End Suction Pump
5.FAQ
① What is your product range?
Centrifugal pump, slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, single stage
pump, double suction pump, industry pump, oil pump, paper pulp pump, mud pump, self-priming pump, pipe
water pump, boiler water pump, etc.
② Are you a manufacturer?
Yes, we have been in manufacturing and marketing industry centrifugal pump over 20 years.
③ What information should I let you know if I want to get a quotation?
Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also provide the pump model you are using now, price will be calculated as per the pump model, if not, we will recommend relevant product for reference.
- Q:When the pump is connected in parallel, will the head and flow change?
- 2 pumps parallel, lift the same, pump head is not stacked?;Answer: the head can not be superimposed, that is, a lift and a pump, but the pumping speed (flow) is two times a taiwan.2 pumps in series, the same flow, pump head is not stacked?.Answer: the head can be superimposed, that is, the pump head is two times as much as a pump, but the pump speed is the same as that of a pump.A pump is a machine that transports liquids or pumps liquids. It will be the prime mover of the mechanical energy or other external energy transfer to the liquid, the liquid energy increase, mainly used to transport liquids including water, oil, alkali liquid, emulsion, suspension emulsion and liquid metal, but also transport liquid, gas mixtures and liquids containing suspended solids. Pump performance of technical parameters are flow, suction, lift, shaft power, water power, efficiency, etc.; according to the different principles of work can be divided into volume pumps, vane pumps and other types. Displacement pump is to use its studio volume changes to transfer energy; vane pump is to use the rotating blade and water interaction to transfer energy, there are centrifugal pumps, axial flow pumps and mixed flow pumps and other types.
- Q:For what reasons can water pump in car break? Thanks
- Mechanical water pumps break because they have a shaft that goes directly into a water pump housing. That shaft is driven on the outside by the accessory drive belt. on the inside of the water pump housing their is a impeller(a disk like that of a old mill house in the forest next to a stream). between inside the pump housing and outside there is a rubber seal to keep the coolant in. Because the rubber seal is exposed to heat drying occurs on the outside causing the rubber seal to on day get hardened. On the inside the hot coolant keep the seal pliable and soft. when air gets inside the coolant system with water it causes the seal to dry on the inside of shaft seal. When heat is on both sides of the seal exposed to air cracking occurs faster causing the seal to crack all the way through and spill water. Electric water pumps for cars are some of the most compact and powerful water pumps around for their size. Due to the extreme under hood temps and the constant turning on and off to save gas the electric water pump for cars have a short life. It used to be electric water pumps were only used in the drag race area; due to electric failure. Not until recently have companies started to deploy them among small cars and also as secondary pumps for turbo and supercharger applications with having a main water pump being mechanical.
- Q:Plumber quotes installing system using cross-over valve which some way ties the recirculation through the cold water pipes. This sounds like a short-cut. Are there any disadvantages to this system?
- You may contact with Guru Contracting Ltd. They have 30 years of experience, with fully qualified plumbers and fully stocked vans. They do Plumbing repair, services and installation.
- Q:Here we have 3 sets of centrifugal pumps, as production water, 2 by 1, because the production is not allowed to stop, so we want to change for a pump, the original two pumps to stop, and three water pumps on the amount, and then stop the pump, but not on the third pumps the amount, do not know what the reason, the master to help, thank you very much..
- The problem you are experiencing is stressThe above answer is only considered in the case of water absorptionJust imagine, two pumps are normal work, the same suction pipe, how can there be dissatisfaction with water or vacuum state?.According to my experience analysisYour system is three sets of parallel, lift and flow should be the same, if not the same, not in this discussion, the topic should be set up.Lift is the same, that is, in two or three units at the same time, the resulting system pressurization is the same, and water will increaseBut now your traffic is increasing at two units, but it will not increase at threeYou have selected pipeline system design, in the design of head flow under single condition is constant, if the increase in open water pump, the pressure is constant, increasing water content, according to the continuity equation Q = A X V, then the flow velocity in the tube will increase;But when the third pumps, 2Q becomes 3Q, normally velocity should be larger, but the Darcy formula shows that the velocity increases, extension resistance and local resistance will be increased, and the double square, so you can open third pumps for reasoning, when the resistance effect caused by the pipeline the increase of water flow in the pipeline can not be reused, the general formula of constant current, now the whole pipeline in turbulent stateThat is, third pumps to do the work in the water and pipe wall friction in the loss, and actually did not play a role in water supplyThe solution is to increase the flow rate by increasing the water supply pipeline
- Q:Yang Chengtai big, the pump power is too small, the water pump will be bad?
- Generally not only affect water output, followed by what water pump. Generally small water pump buried too much, sealed less than required, easy to water, causing the motor to burn down.
- Q:I have a '97 Grand Prix with a 3800 V-6. There is a single bolt on the left side of the water pump that is directly behind the power steering pump pulley. How do you get the PS pump pulley off? I pulled a tricep trying to get this thing loose, and I'm no further now than when I started on it. Can anybody give me a tip on removing the pulley or the whole PS pump? I have a brand new water pump that I can't get on because of this fine piece of design by the brilliant engineers at GM!
- here is a step by step on how to re move the pump is a lot easier than tring to pull off the pulley plus it will not come off when it on the engine there is no room for thr puller.
- Q:Fire pump control cabinet installation distance, ground height should be how much?
- We know that the fire pump control cabinet has the distinction of floor and wall mounted, wall mounted control cabinet installation height generally is determined by the employer departments, without any special labeling, proposed control cabinet frame under the 120cm from the ground, this is the installation height compared to the commonly used, can be used for your reference.
- Q:I have a 1.5 horse Power Hit and Miss engine? Is it possible to buy a water pump I could run off of the hit and miss engine that would pump water from a river over a big hill and little ways and into a water tank or is this just a waste of time. How much water could I pump at a time? A trickle or a gush of water? When I say hill I don't mean like a little hill in your yard I mean a hill you have to hike up? If you don't know are there any resources I could access? Where could I buy such a pump if there is one?
- A horse and a half won't do much. You would be better off with a hydraulic ram type pump if you can get about a 10 or 15 foot fall before the ram. It will pump about 4 or 5 times the height of the fall, but in small quantities. It will run 24/7 without gasoline, so it will fill a tank over a long period of time. The railroads used them during the steam era when they had huge water towers out on the plains.
- Q:I am planning to build a koi fish pond, and I know I need a water pump. All I know is that a water pump will circulates water. Does it do anything else? does it act like a filter? does it provide aeration or oxygen to the pond?
- It only circulates the water, nothing else. Also, make sure your pond won't be in sunlight the whole day. Sunlight makes algae grow. ~ZTM
- Q:what is the actual capacity of 15 stage 1 H.P. Borewell submersible pump. I mean can it draw water if it at 300 ft depth. Is 15 stage 1 H.P pump capable to draw water
- thanks for th information
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
DIN Standard End Suction Water Pump for Water Irrigation
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
