Aluminum Channel Stock

Hot Products

9/16 Galvanized Suspension Ceiling Tee Grid for Ceiling

Plain Ceiling T Grid Flat Ceiling System T15 T24 Ceiling Grid

Suspended Ceiling Grid Wire - Plane Tee Grid Suspension System

Ceiling Grid Hooks for Suspension Ceiling Tee Grid System

Groove Ceiling T Grid Exposed Ceiling System

Suspended Ceiling Grid Clamps - Suspension Ceiling Tee Grid-Metal Ceiling Grid

Usg Ceiling Grid - Suspension Ceiling Tee Grid Ceiling System

Usg Ceiling Grid Home Depot Suspension Ceiling Tee Grid for Acoustic Ceiling

Usg Ceiling Grid Accessories for Suspended Ceiling T Grid System

Suspension Ceiling System, Ceiling T Grid

FAQ

What is the distance between the main keel? How much is the distance between the keel? What is the spacing of the hanging bars?

The main dragon spacing is 1 meter, vice-long distance is 30CM, hanging spacing is 1-1.2 meters

Describe your system and architecture. How do you COOL your house? My biggest concern is how to cool a home off the grid.

open the windows and use a fan.

I have recently installed a new suspended ceiling. I have scraped or chipped the corners on a few of the tiles when installing it into the grid system. Is there a product available that can be used to touch-up the scraped off paint?

We usually use white shoe polish to hide the brown material visible from damage in ceiling tiles. You could go through the trouble of trying to fill with a filler material but the texture will never match and it can get messy. Just use either white shoe polish or spackle that comes from Home depot in a bottle with a foam applicator pad at the end, water clean up and white color makes easy repairs

Construction Process of Light Steel Longguard Paving

Keel installation 1) large keel available welding method and hanging rod welding. But it is best to use the hanging rod and the boom connection, tighten the screw card. Large keel can be connected with a long connection. After installation to be leveling, consider the height of the ceiling from the arch, not less than the room short span of 1/200. 2) in the keel with a hanging piece with a large keel fixed. The spacing of the keel depends on the size of the plate. When the spacing is greater than 800 mm, the keel should be added between the keel, which should be parallel with the keel, and hanging with a large keel and fixed, the lower surface and the keel at the same level. 3) in the seam joints should be installed in the cross, the keel, cross-keel with a flat connection with the small keel fixed. 4) the final installation of special-shaped roof or curtain box shaped keel or teach aluminum keel.

Do you want to install light steel keel

The kitchen should not be very big, you say the aluminum plate is a square or long? The use of light steel keel is nothing more than the main dragon and boom, the other does not need light steel keel, what do not know in asking me,

Light steel keel ceiling when to add crossed keel

Two gypsum boards overlap with keel

Like trying to dig a hole in a lake. Is this done in the industry? I have a client who wants me to replace the fans in their bathrooms with suspended ceilings (2x4 grid and acoustical tile). I intend to cut the doors up an inch above the floor but what keeps the air above the suspended ceiling, above the ceiling? It seems like the air would easier come through the ceiling and/or over the tops of the walls. Then under the door.

A very, very high percentage of restroom walls either run to the floor or roof above and / or have a drywall ceiling above any suspended ceiling. Otherwise it would be like having a restroom in the center of a low partition open concept office area. The exhaust fans must be ducted through the ceiling above the suspended ceiling and to the outside of the building. The exhaust make up air will come in the room at your door undercut.

What are the methods for fixing light steel keel?

The ceiling is fixed with the expansion of hanging bars, cut off can be directly nailed