1 8 Inch Diamond Plate Aluminum

Hot Products

FAQ

What are the uses and differences of gate valves, butterfly valves, ball valves and other valves?
The use of the same difference, you can see the shape
What's the meaning of the "single valve"?
There are nuts, plants, flush three parts. The pipeline steel or steel ingot forging molding machine fittings, connection form the socket welding and threaded, socket welding steel pipe is inserted into the socket is in welding, so called "socket joint, thread connection pipe is screwed in the screw through connection.
How does the valve close?
This is a relatively vague ah, like the stem ah, usable spanner clamping, clockwise rotation in the end. The handle should be closed groove and the coincidence place.
The total valve of my natural gas was closed by the attitude I tried. Now I can't open it. I need to use gas. Who knows how to drive it? What skills do I have? I'm talking about the main valve.
General domestic weather is more ball valve, counterclockwise turn 90 degrees can.
What valve is the VENT?
VENT generally use a check valve (resembling a screw, spring preload), also directly using the plugA two-way sealing type ball valve for example, in order to detect the leakage of the pressure after the end, also for pressing the cavity is convenient, usually in the body cavity external to the up position to open a checking leak, which is VENT.
Measure the temperature with a thermocouple, and then how to make the valve open when the temperature reaches a certain value. When the temperature is lowered, will the valve be closed?Or tell my brother what is the knowledge, I can see it myself. Good. How much extra?!
A relay or PID controller can achieve this operation, only need to set out, the valve can use electromagnetic valve, which belongs to a rapid opening and closing valves, only need to control the electric power to the valve can automatically open or closed, but the temperature change is large, if you want to keep the temperature constant. The best selection of regulating valve, constant temperature control valve will be before or after the valve, the main electrical control knowledge, do not know what I said is clear, remember the points, thank you!
What are the advantages and disadvantages of this method? Are there any other ways to adjust the flow rate?
With the advantages of the pump outlet valve adjustment, 1, you can control the pump outlet pressure, 2, you can control the motor current is not more than the process conditions, 3, control motor power, to ensure the normal operation of the pump.
1/2, what does 1/4 valve mean? I don't understand. What does this number mean? Have a valve to introduce me, do not copy a pile of online introduction, I want to concise
1/2, 1/4 valve is our usual popular name. "1/2" and "1/4" refer to the size of the valve bore, in inches. And there are 3/4, 3/8 to 24, 30, and 36 inches. Relative to our country on the valve bore that is "DN."". There are about 1 inches =25.4MM conversion, so in general we are 1 inches of the valve is DN25 valve.