Q:my rear wheel on my 2008 crf 450r is wobbling and one of the spokes popped out of the socket on the wheel. What do I do?! Should i put a whole new rim/wheel becuase im gonna buy a new tire for it anyway. I‘m not sure if it‘s the wheel or the swingarm that‘s wobbling. I tightened my spokes last week which stopped the wobbling. But it‘s wobbling again. And one of the spokes is out. Help me?

properly the most inexpensive approach might want to be to interchange those 2 lacking spokes, which isn't a complicated interest if you're slightly accessible. i take advantage of to interchange and regulate my spokes on my mountain and racing motorcycles yet than a motor-airborne dirt and airborne dirt and dust motorbike is slightly trickier yet merely the same. it really is in fact suggested that you do not vacation any motorcycles without lacking or incorrect adjusted spokes, or you would possibly want to harm the wheel. And than you would possibly want to ve extra paintings! per chance you could carry the motorbike to a nearest motorbike provider station to get it fastened, that could be more less expensive than paying for a clean one. Motor motorbike wheels might want to correctly be quite severe priced!

Q:It is better to look better at night. Also, to see a very domineering front, is the 8-shaped, what kind of front called?

Tire no good decoration, in the mouth of a mouthpiece installed (gas nozzle has three, light, dynamic and rotary switch) or add a fire wheel, which are decorated at night, riding at night " twinkle Twinkle Little Star".

Q:4.7 liter v8 four wheel drive with four wheel disk brakes

Most pickup trucks built before 2010 only had ABS on the REAR brakes. That was to keep the rear end from skidding in a hard stop. You could try reading your owner's manual to see what it has to say about the subject.

Q:A wheel-like, look at foreign TV software?

PPNTV is the first aggregation of P2P network television software, only one installation, you can watch online Including PPlive, PPstream, QQlive, TVKoo, boiling point and other 11 kinds of P2P network television.

Q:ok i mainly skate street some time i go to skate parks my friend said i should get the smallest wheels i can find ?

Transition / Vert Larger skateboard wheels roll a lot faster, and when riding ramps this is what you want. Try 55-65mm size wheels (though many ramp skateboarders will use even larger wheels -- try something like a 60mm wheel first, as you learn), with a hardness of 95-100a. Street / Technical Skateboarders who like doing flip tricks often like smaller wheels, as they are lighter and closer to the ground, making some skateboarding tricks easier and faster. Try 50-55mm skateboard wheels, with a hardness of 97-101a. Both / All Terrain You'll want something in the middle, with slightly softer skateboard wheels. Try a wheel size 52-60mm, with 95-100a hardness. This should give you a balance between speed and weight. Cruising Usually cruising wheels are much larger for speed (64-75mm) and much softer for riding over rough terrain (78-85a). Other wheels for cruising are available, such as huge dirt wheels with knobs, but these aren't recommended for skateboards (try longboards or dirtboards).

Q:can any kind of aftermarket rim be powdercoated to a color of my choice?I am interested in the tenzo DC5 rim, but I don't like any of the colors. can you explain the proccess of powdercoating, and if it can be done to this wheel?thank you.

powdercoating is applied by applying a coat of paint in the form of a powder, which sticks to the surface by way of an electric charge, the wheel is then baked. powdercoat is a tough coating and well worth investing in. bear in mind that wheels will proberly have to be sandblasted before process.of applying the paint particles. there are only certain paint colours avalible in powder coat so make sure before you buy your wheels, that the company can cater for you colour needs as its an expensive operation,

Q:Doors need to use a hammer to check the train wheel, foreign locomotives, such as Japan, also need such a check?

Steam locomotive inspection of Japan is also some, and even can say that China is also followed the Japanese school.

Q:Tire tires should rely on a pressure ring to force the tire on the wheel, right? I remember a child watching tires, that is, I have a problem, whether it is disc brakes or drum brakes, are to let the wheels stop, but if the tire is not connected with the hub, then a car so heavy, very Easy to cause slippery, when the wheel does not turn the wheel, but the tire or continue to turn, but in fact the tire after the tire is also stopped, how is it done? Just by a pressure ring I think so there will not be so much force to tire tight and the hub connected to a bar? How is this done?

The tire's bead seat is fixed to the hub edge and pressed by the lock ring!

Q:Not as a permanent thing. My scooter now is just your average kick scooter, but the wheels are really worn! I cant afford to get new wheels right now but i can soon. So can i just use my ripstik wheels until i can get new scooter wheels? Thanks :)

Ripstick wheels should be 76mm Most Scooter Wheels such as JD Bug, Madd, Slamm, Razor, Micro etc mainly use 100mm So they wont be any good. You could buy some Blazer Wheels 100mm from as little as ?4.99 each. They come in a wide range of colors but bear in mind alloy core wheels are stronger and cost more. Starting at around ?11.99 Each.

Q:looking at a deisel dodge ram truck and the description says 5th wheel. what exactly does that mean? theres 4 wheels on the trucklol. why call the extra wheel the 5th? or why call it a wheel?

That is the plate in the bed to hook up a trailer. Looks just like a semi fifth wheel. It is called that as it acts as a wheel. Look at a semi with no trailer attached. Same thing