PE physical foaming insulated coaxial RF cable SYWV(Y)-75-7
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product properties:
Uses: This product is applicable to shared antenna systems, closed circuit television system and other signal transmission, and such cable has the characteristics of small attenuation and strong anti-interference
Structure and size of YWV (Y) PE physical foaming insulated coaxial RF cable products
Items | Sizes | ||||
SYWV(Y)-75-5 | SYWV(Y)-75-7 | SYWV(Y)-75-9 | SYWV(Y)-75-12 | ||
Inner conductor diameter | 1.00±0.02 | 1.66±0.02 | 2.15±0.03 | 2.77±0.03 | |
Outer diameter of foaming medium (insulator) | 4.80±0.20 | 7.25±0.20 | 9.00±0.25 | 11.50±0.30 | |
Outer conductor | Aluminum-plastic composite belt or aluminum foil + tinned soft copper wire braiding, and the nominal diameter when the tinned copper wire is used in braid | 0.12~0.15 | 0.12~0.15 | 0.12~0.18 | 0.12~0.20 |
The maximum diameter braided angle of outer conductor ≤ 45 °, filling factor of 0.23 (minimum) | 5.8 | 8.3 | 10.1 | 12.6 | |
Jacket | Thickness | 0.70 | 0.85 | 0.96 | 1.00 |
Outer diameter | 7.2±0.30 | 10.3±0.30 | 12.2±0.40 | 15.40±0.40 | |
Delivery length | Length of each volume | 100 | 100 | 200 | 200 |
Short break | 20 | 50 | 50 | 50 | |
As for length of each conducting wire of -7, -9, -12, the order requirements shall prevail |
Electrical performance of SYWV (Y) polyethylene physical foaming insulated coaxial RF cable products
Items | Sizes | ||||
SYWV(Y)-75-5 | SYWV(Y)-75-7 | SYWV(Y)-75-9 | SYWV(Y)-75-12 | ||
Core cable dielectric strength | 1.6 | 1.6 | 1.6 | 1.6 | |
Insulation Resistance 500V DC > | 10000 | 10000 | 10000 | 10000 | |
Sheath dielectric strength | Spark test | 3.0 | 5.0 | 8.0 | 8.0 |
Water immersion test | 2.0 | 3.0 | 5.0 | 5.0 | |
Characteristic impedance 200MHZ | 75±3.0 | 75±2.5 | 75±2.5 | 7.5±2.0 | |
Voltage decrease constant | 50MHz | 4.9 | 3.1 | 2.6 | 2.0 |
200MHz | 9.9 | 6.5 | 5.2 | 4.1 | |
550MHz | 16.8 | 10.7 | 8.5 | 6.7 | |
800MHz | 21.0 | 13.9 | 11.5 | 92 | |
Return loss | VHF | 20 | 20 | 20 | 23 |
VHF | 18 | 18 | 18 | 20 |
- Q: this 40gb ps3 has no power computer cord or hdmi cable and i would like to know how much money i would spend all in all with allt he stuff i need...
- I okorder /... Please note that the power cable linked above is out of stock on their online store, but your local place should have other brands available for you. All in all you're looking to spend at least $25 or more, depending on the length you'll need for the HDMI cable. Hope it helps.
- Q: YJV three-core cable and the difference between the four-core cable
- This phenomenon is generally the audio input has an AC signal amplified by the amplifier after the results, supplies a little short and good quality of the input of the smooth exchange of spring spring to help Tong burst Kun line test, if not improved that is the receiver problem.
- Q: Hifor the last days a strange thing happened. Every time I start my PC it say no video input and there is just black screen. The mouse and the keyboard is dead too. but every fan in the chase works. BUT when I unplug the power cable from the power supply and then plug it back again after 2 seconds the PC starts again without a problem. Anyone knows what is the thing that cause such a problem?THanks for the help!
- did you check the power cord and socket . because if it is a problem of power supply unit (psu) in your cpu cabinet than the whole system wont start.
- Q: I want to tidy up all of the cables behind my desk. I have some of that special plastic wrap to do it, but I'm worried about overheating and induction.How many mains voltage power cables can I safely have in a single bundle? What about speaker cables and TV/monitor cablesHow can I tell if I have bundled up too many cables together, are there any warning signs?
- get you some zip ties to tie together the wires tie power cables with power cables all other wires speaker keyboard mouse together it will be fine.as long as air can get to a good portion of the wires
- Q: So i left my xbox on over night (i know i know) and during the night there was either a power outage or surge, cuz all the electronic clocks had been reset. So i went to my xbox, and the light on the power cable box was red and my xbox wouldnt turn on. I havent tried unplugging it yet cuz the wires are behind my tv and a pain in the *** to get to, but i have a feeling this wont help.do i need to get it repaired?
- It's probably way to hot so plug it out for about an hour and a half and that will probably cool it down then and then it might be ok then.
- Q: So my old power cord cable is no longer working and i need a replacement but i cant find one. does anybody know where i can find one? PLease include links
- The picture in the manual shows a standard IEC type power cord, which you can get at any electronics or computer store.
- Q: Hello,I recently bought a kotatsu and I really need some help. The power cable is of course Japanese And I need some type of converter.On the part of the cable that plugs into the radiotaor it says:PSE (It's in some square box)JET MR7A 250VOn the end that plugs into the wall it says:PSE (It's in some square box)JET MR7A 125VI''m not sure if a simple small converter to let me put the Japanese cable into my wall is enough, I think I need something extra to make sure nothing goes into flames.Inside the Japanese instruction manual I found some info However, I'm not really sure if it is related to the power supply or notAC100V 50-60Hz400W3.1 (Probably the length of the cable) 1.3 (Same here I think)140Wh 60 Wh55C 37CPlease help me, what should I get to be able to use the cable in Europe. Any links at all will be helpfulThanks.
- Don't worry too much about what the cord says. Worry about the power requirements on the appliance label, and making sure you are feeding it with the voltage required, with a capacity within the range. In your instance, you will need a converter transformer that converts your outlet voltage to 100V, and has 550 or larger watt capacity.
- Q: When i want to connect two SATA hard drives do I need some power cable on slave or just to connect it with sata cable and that'it? Because I did it like that and it's not recognized. And I don't have second SATA power supply cable in my computer.
- Don't have to worry about master/slave with SATA, however, if you also have EIDE hard drives in your system, you may have to set your BIOS to enhanced or some other cooperative mode to use them all at the same time.
- Q: what would happen if i used a 10 guage power cable on a 2400 watt amp, would it blow the fuse of would the amp just creat less power? thnx
- Hope you like bon fires!
- Q: I am using a Peavey Windsor half-stack that I've had for a little over a year now. It's 300 watts, 120 VAC (whatever that means), and 60 Hz. I lost the power-cable so I bought a new one, but I wanted to make sure there's no risk in using it. I'm pretty sure it's safe but I'd hate to overpower it if that's possible.
- It means that it has 300 watts of power . Thats a lot of power. 120VAC means that you connect it to a regular wall plug. If you can connect it to the amp and the wall socket , you got yourself an amp.
Send your message to us
PE physical foaming insulated coaxial RF cable SYWV(Y)-75-7
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords