nuts joint Braided Metal Hose absorb the vibration, noise, thermal expansion from pipeline system,good anti-fatigue performance
Features of nuts joint Braided Metal Hose
1. To absorb effectively the vibration, noise, thermal expansion from pipeline system;
2. To resolve minor deviation because of piping connection and eliminate the pipeline residual stress;
3. Applied to repeated motion region in high-temperature areas, good anti-fatigue performance;
4. Good flexibility, resistant to high temperature, resistant to corrosion
Applications of nuts joint Braided Metal Hose
For the chemical industry, metallurgy, electricity, shipbuilding, construction and other industries.
- Q:Principle of fast pipe joint
- The application with a one-way valve, a one-way valve end is connected with the gas source, when the check valve closes automatically when connected to a one-way valve open end of the thimble.Self locking is the use of steel balls embedded in the groove, while the "cone - cylinder" sleeve to lock the ball.
- Q:What is the difference between a D-LD2000 clamp type flexible pipe joint and a KRJ clamp flexible pipe joint?
- Four, flexible pipe joint internal structure and KRJ internal structure is slightly different, flexible pipe joint no retreat or small platform, and the latter is large return platformFive, flexible pipe joints, standard clamp type flexible pipe joints, disassembly can be worn down, shoulder type flexible pipe joints can not be.Note: some units in the market now confuse the two products with the aim of selling high priced products at lower prices so that they can make more profit margins. To ask for the data parameters of the drawing, to judge whether it is a flexible pipe joint or a flexible pipe joint.
- Q:How tight is the gas pipe joint?
- A section of the pipeline connected with the household is mainly connected from the pipe joint to the ends of the gas cooker. The most common is the use of oil resistant, pressure resistant reinforced plastic pipe. The plastic pipe shall be inserted into the pipe joint so long as to avoid leakage.The plastic tube is inserted, should use the hose clamps or other hoop, or wire tie, then use soap (do not use fire to leak detection)
- Q:Can the pressure vessel pipe joint adopt G thread? Why?
- 3, pressure vessel, English: pressure vessel, refers to contain gas or liquid, carrying certain pressure airtight equipment
- Q:Connect with stainless steel tube with 304 stainless steel clip type pipe joint,
- I personally think that the installation problem, that is, the card sleeve and steel pipe only after installation to reach the sealing effect, the installation quality can not meet the design pressure requirements.To avoid this situation, it is recommended that after installation 1.25 times higher than the design pressure test, test pressure can be put into use
- Q:Hydraulic pipe quick coupling principle of hydraulic pipe joint
- Quick change joint, one is with one-way valve, and the other is without one-way valve. The application with a one-way valve, a one-way valve end is connected with the gas source, when the check valve closes automatically when connected to a one-way valve open end of the thimble. Self locking is the use of steel balls embedded in the groove, while the "cone - cylinder" sleeve to lock the ball.Type, type, structure diagram, characteristic table and standard number of pipe joint, welded pipe joint is welded by pipe and pipe. The sealing surface of the O sealing ring is sealed between the joint body and the pipe. The utility model has the advantages of simple structure, easy fabrication, good tightness and low requirement for the dimension precision of the pipe. High welding quality, inconvenient assembly and disassembly. The working pressure can reach 31.5MPa and the working temperature is -25 to 80 degrees. It is suitable for the piping system with oil as the medium. Table 6~14The JB966 ~ 1003-1977 card sleeve pipe joint is jammed and clamped by the deformation of the clamping sleeve. The utility model has the advantages of advanced structure, good performance, light weight, small size and convenient operation, and is widely used in the hydraulic system. Working pressure up to 31.5MPa, requiring high dimensional accuracy of the pipe, cold drawn steel pipe is required. The card sleeve is also of high accuracy. Piping systems for oil, gas and general corrosive media 15~26
- Q:Hydraulic hose joint is spherical and cone sealing, threaded connection, what is the form of joint?
- Hydraulic joints are often spherical joints, concave and convex.2 types of teeth with imperial teeth and unf.
- Q:What are the standard drawing numbers for hydraulic couplings?
- Jacket type pipe joint installation(1) in accordance with the requirements of the ninth chapter, the pickling pipe should be washed first;(2) tube machine tools for cutting pipe sawing or special cutting length required, absolutely not allowed by fusing (such as flame cutting) or grinding wheel cutting; remove pipe end burr, cylindrical metal chips and dirt; remove the rust and dirt pipe joint; and also to ensure pipe roundness;(3) the sleeve nut, successively sheathed in the pipe sleeve front edge (small end) from the pipe mouth at least 3mm, then the pipe is inserted into the connector body bore, until the top;(4) tighten the nut slowly, and turn the pipe at the same time until it does not move. Then tighten the nut 2/3 ~ 4/3 ring;(5) open the check that the sleeve has been cut into the pipe and the position is correct. The sleeve doesn't allow axial movement, but it can be rotated slightly;
- Q:The union bonnet (Union Bonnet) and bolted bonnet valves (Bolted Bonnet) the same?
- There is no bonnet flange that is threaded directly.
- Q:Standard Specification for jacket type pipe couplings for card sleeve couplings
- Specification sheet, thick tube, B (water gas pipe), thin steel tube, A (wire pipe), metric, English, nominal, nominal diameter * wall thickness mm nominal
Our products are of advanced design, rational structure, stable performance, and flexible and high anti-fatigue properties. With our quality assurance system, we improve comprehensive test means and attain the ISO9001 quality system certification and pressure pipe component production license.
1. Manufacturer Overview
||Jiangsu, China (Mainland)
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||5,000-10,000 square meters
|No. of Production Lines
||OEM Service Offered Buyer Label Offered
|Product Price Range