300mm High Power Graphite Electrode for EAF - Factory Direct
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 500 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
HP Graphite Electrode
Graphite electrode introduction
Graphite electrodes are used mainly in electric arc furnace steel production. They are presently the only products available that have the high levels of electrical conductivity and the capability of sustaining the extremely high levels of heat generated in this demanding environment. Graphite electrodes are also used to refine steel in ladle furnaces and in other smelting processes.
Item | Unit | Nominal Diameter | ||||||
UHP | HP | RP | ||||||
Φ300-400 | ≥Φ450 | Φ250-400 | ≥Φ450 | Φ250-400 | Φ450-600 | |||
Electric Resistivity | electrode | μΩ·m | ≤5.0 | ≤5.5 | ≤6.0 | ≤6.5 | ≤8.5 | ≤9.0 |
Nipple | ≤4.0 | ≤4.5 | ≤5.5 | |||||
Transverse Strength | electrode | MPa | ≥15.0 | ≥10.5 | ≥8.0 | ≥7.0 | ||
Nipple | ≥24.0 | ≥20.0 | ≥16.0 | |||||
Young’s Modulus | electrode | GPa | ≤14.0 | ≤12.0 | ≤9.3 | |||
Nipple | ≤18.0 | ≤16.0 | ≤14.0 | |||||
Bulk Density | electrode | g/cm3 | ≥1.68 | ≥1.65 | ≥1.54 | |||
Nipple | ≥1.76 | ≥1.74 | ≥1.70 | |||||
Coefficient of thermal expansion | electrode | 10-6/℃ | ≤1.5 | ≤2.0 | ≤2.5 | |||
Nipple | ≤1.2 | ≤1.6 | ≤2.0 | |||||
Ash | % | ≤0.2 | ≤0.2 | ≤0.2 | ||||
HP Graphite Electrode
1,The high power graphite electrode uses Fushun petroleum coke,Japanese imports of needle coke and temperature modified asphalt as raw material,in accordance with the high power graphite electrode production processes,crushing,screening,dosing,kneading,forming,baking,hi pressure impregnation,the second time of baking,graphitization and machining refined.
2,The nipple uses Japanese imports of needle coke,three times of baking processes.
- Q: Thermal expansion coefficient of graphite
- In the graphite electrode, the national standard, the volume density in more than 1.60 of both high power graphite electrode, of course because of the national standard index is low now, the volume density of normal power graphite electrode factory can reach 1.65, such as Chengde and long carbon factory.
- Q: The reason why graphite is used as electrode
- Good chemical stabilityGraphite has good chemical stability at room temperature. It can resist acid, alkali and organic solvent.
- Q: How long is the graphite electrode machining cycle?
- Industrial graphite is hard and brittle, and the tool is worn more seriously during machining. It is generally recommended to use carbide or diamond coated cutting tools. When the graphite is rough, the cutter can be directly worked on the workpiece. When it is finished, it is necessary to use light knife to walk quickly to avoid the occurrence of chipping and chipping
- Q: The difference between graphite electrode and graphite rod
- Graphite rod for non metal products, as carbon arc gouging cutting process in an essential pre welding cutting supplies, is composed of carbon and graphite with appropriate adhesive, through the extrusion, the temperature of 2200 DEG C after baking rotary plating a layer made from copper, high temperature resistance, good electrical conductivity, is not easy fracture, suitable for metal cutting into required shape.
- Q: Why should graphite paper be placed between the heater and the graphite electrode?
- Heater design, the common heater has three shapes, cylinder, cup, spiral, the vast majority of the current heater is cylindrical, as shown in figure. The spiral heater has complicated processing technology and has been eliminated. Cup shaped heater for hemispherical crucible, the bottom melt temperature is more uniform, because the processing technology is difficult, already no use. Nowadays, most of them use cylinder heaters. The cylindrical heater is not only easy to process, but also is related to the large number of flat crucible used in the direct drawing single crystal furnace.
- Q: How much does a graphite electrode cost about a ton?
- Electrode is divided into ordinary power motor, high power electrode, ultra high power electrode, the gap between the price is still relatively large
- Q: Carbon graphite electrode and what is the difference?
- Graphite electrode is a mixture of natural graphite and petroleum coke and asphalt coke. After being treated by high temperature graphitization, the material is composed of graphite;
- Q: Excuse me, why does the graphite electrode flake when electrolyzed salt water is used?
- Device for electrolytic reaction. The electrolysis bath comprises a tank, an anode and a cathode, the majority of diaphragm separates the anode chamber and a cathode chamber. According to the different electrolyte aqueous solution electrolysis, molten salt electrolytic cell and nonaqueous solution electrolysis. When three kinds of direct current through the electrolytic cell, the anode oxidation the reaction solution and at the interface in the cathode and the electrolyte interface reaction, to produce the required products. To optimize the design of electrolytic cell structure, reasonable selection of electrode and diaphragm material is the key to improve the current efficiency, decrease cell voltage and energy saving.
- Q: How do graphitized electrodes differentiate between high power and low power?
- In an electrolytic cell, the current from a class called graphite anode plate into the electrolyte electrolysis industry, the anode is made of plate shape, so called graphite anode plate, widely used in electroplating, wastewater treatment, industrial anti-corrosion equipment or special materials.
- Q: What are pyrolytic graphite electrodes used for?
- In 1960s, copper is widely used as electrode material, usage rate of about 90%, about graphite only 10%; in twenty-first Century, more and more users start using graphite as the electrode material, in Europe, more than 90% above the graphite electrode material is. Copper, the once dominant electrode material, has almost lost its advantages over graphite electrodes.
Send your message to us
300mm High Power Graphite Electrode for EAF - Factory Direct
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 500 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
