Product Description:
Quick Details
Place of Origin: China
Brand Name:CMAX
Model Number:
Type:Electrode Block
Application:LF,EAF
Length:1600~2700mm
Grade:HP (High Power), RP HD HP UHP available
Resistance (μΩ.m):5.8~8.5 micro ohm.m
Apparent Density (g/cm³ ):1.56~1.70 g/cc RP HP UHP
Thermal Expansion: 1.3~2.5 RP HP UHP
Flexural Strength (N/㎡):8.5~12 Mpa RP HP UHP
Product name:Anti-Oxidation Graphite Electrode for Eaf
Needle coke:15~90%
Application 1:
Electric Arc Furnace
Application 2:
submerged arc furnace
Nipple Type:Conical and taper
Special treatment:anti-oxidation treatment
Advantage:low consumption rate
Services:engineers for technical supports
Supply Ability
Supply Ability:
100000 Ton/Tons per Year
Packaging & Delivery
Packaging Details
Fumigated wooden cases or as customer requirements
Port
Qingdao or As customer request
Product Information
Size: Diameter ranges from 50 to 1200mm, Length from 1500 to 2400mm.
Application: Electric arc furnaces and submerged arc furnaces for steel making and yellow phosphorous production.
Grades Available, RP, HP, SHP, UHP graphite electrodes and nipples
Special Treatment: Anti-oxidation impregnation treatment to extend graphite electrodes service life and reduce consumption rate.
Graphite Electrodes Technical Specifications:
Items | 300~400 | 450~500 | 550~600 | 700-800 |
Specific Resistance | 6.2 | 6.3 | 6.3 | 6.3 |
5 | 5 | 4.5 | 4.5 |
Bending Strength | 10.5 | 10.5 | 11 | 11 |
18 | 18 | 20 | 20 |
Young's Modulus | 14 | 14 | 14 | 14 |
18 | 18 | 22 | 22 |
Bulk Density | 1.66 | 1.66 | 1.66 | 1.66 |
1.73 | 1.73 | 1.75 | 1.78 |
CTE | 1.5 | 1.5 | 1.4 | 1.4 |
1.4 | 1.4 | 1.2 | 1.2 |
Ash Content | 0.3 | 0.3 | 0.5 | 0.5 |
Product Photo
- Q:What do carbon products include?
- High power electrode and ultra high power electrode. The carbon block can be divided into blast furnace carbon block, aluminum carbon block and electric furnace block. Carbon products can be divided into carbon products, graphite products, carbon fibers and graphite fibers according to the depth of processing. Carbon products can be divided into graphite products, carbon products, carbon fibers and special graphite products according to the raw materials and the production process. Carbon products according to their ash content, and can be divided into multi gray products and less ash products (including ash below l%).
- Q:I used 12V direct current, graphite electrode electrolysis sodium sulfide solution, the anode produced a large number of black material, this is why ah?
- The actual electrolysis of hydrogen sulfide, which produces no black, or impurities that are absorbed by the anode, is graphite, because the dots explain the loose particles that are absorbed on the surface
- Q:What is the difference between pyridine type nitrogen and graphite type nitrogen?
- In fact, this problem is very simple, the carbon graphite is six square lattice ordered, natural graphite and artificial graphite is divided into two kinds: the classification of natural graphite flake graphite and graphite is earthy, basically it is not forming soil shaped graphite graphite, are rough machining, the battery core and do more. The use ratio of flake graphite.
- Q:Graphitized anode, cathode and graphite electrode, respectively How can one differentiate and use differently?
- Compared with other materials of graphite anode plate has high temperature resistance, good electrical and thermal conductivity, easy machining, good chemical stability, acid and alkali resistance, low ash content; for electrolytic solution, preparation of chlorine, caustic soda, salt alkali electrolytic solution preparation; application such as graphite anode plate can be used as conductive anode electrolytic salt solution preparation of caustic soda. Graphite anode plate can be used as conductive anode in electroplating industry. It is an ideal material for electroplating. It can make electroplating products have the advantages of smoothness, delicacy, wear resistance, corrosion resistance, high brightness and not easy to change color.
- Q:Excuse me, why does the graphite electrode flake when electrolyzed salt water is used?
- For example, according to connection of the electrode, which can be divided into two types of unipolar and bipolar type electrolyzer (see photo). The electrode is connected with the DC power supply parallel polarity monopolar electrolyzer, electrodes on both sides of the same, at the same time as anode or cathode. At the same time as the positive and negative electrode bipolar type electrolyzer ends respectively with DC power supply connected, as anode or cathode. The current through the electrode through the electrolysis cell in series, each side of the intermediate electrode as the anode, the other side is the cathode, so it has a bipolar electrode. When the total area at the same time, the current bipolar type electrolyzer is small, high voltage DC power supply, the required investment ratio monopolar, bipolar type filter press used. The general structure, more compact. But easy to leakage and short circuit, slot structure and operation management is more complex than the monopolar type. The monopolar electrolyzer section is generally rectangular or square, cylindrical covers a large, empty The utilization rate is low and the adoption rate is less
- Q:Why graphite can be used as conductive material?
- Lubricants can not be used in high speed, high temperature, high pressure conditions, and graphite wear-resistant materials can be at the temperature and at a high sliding speed, without lubricating oil work. Many transporting corrosive media devices are widely used, which is made of graphite material piston ring, the sealing ring and the bearing, they are running, without adding lubricating oil, graphite and many metal processing when good lubricant.
- Q:What is the application of wire cutting with graphite electrode?
- With the development of science and technology, the machine manufacturing technology has undergone profound changes. Due to the social demand for diversification of products is more intense, more varieties, small batch production increasing proportion in WEDM by traditional processing equipment has been difficult to adapt to the processing of high efficiency, high quality, diversified requirements, CNC technology should be used
- Q:What are the losses in graphite electrode?
- In EDM, discharge principle is to remove the workpiece material by using the tool and the workpiece anode spark discharge explosion, spark discharge is bidirectional, not only will the workpiece removal part, forming processing, will cause some loss of electrode. Electrode loss is one of the main causes of machining errors in machining, and is an important technical parameter affecting the accuracy and quality of EDM
- Q:Why should the carbon brush for the trolley be made of graphite?
- What you said is the graphite electrode graphite, there may be a high pure graphite graphite conductive rate so high, strong, high density, the graphite is mostly used in motor vehicles, such as generators, and electric tools.
- Q:Graphitized coke, graphite, broken, mixed up, how to export?
- Graphite fossil oil coke is the best smelting carburizing agent. In the steel-making industry, to produce good steel, there must be good raw materials, including good carburizing agent, and the graphitization of petroleum coke is the best carburizing agent.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
