Quick Details
-
Model Number: RP 10"
-
Type: Electrode Block
-
Application: arc furnance industry
-
Diameter: 250mm 10"
-
Length: 1800mm 72"
-
Grade: RP (Regular Power)
-
Resistance (μΩ.m): 8.0
-
Apparent Density (g/cm³ ): 1.65
-
Thermal Expansion: 2.8
-
Flexural Strength (N/㎡): 8.0
-
Ash: 3%
-
Nipple: 3TPI 4TPI
Packaging & Delivery
Packaging Details: |
wooden cases with steel belts |
Delivery Detail: |
3 or 4 weeks after the contract confirmed |
- Q:What is the role of the Pt electrode? What is the difference between the graphite electrode and the graphite electrode?
- In the electrochemical process, the electrode should not affect the reaction on the working electrode, so platinum and graphite are often chosen
- Q:The reason why graphite is used as electrode
- Good chemical stabilityGraphite has good chemical stability at room temperature. It can resist acid, alkali and organic solvent.
- Q:What is the composition of petroleum coke and what is its use?
- Petroleum coke can be used for the manufacture of graphite, smelting and chemical industries, depending on its quality. For example, the quality of cooked sweet coke coke, mainly used in the manufacture of ultra high power graphite electrode and some special carbon products; needle coke in steelmaking industry is an important material new technology development of EAF steelmaking.
- Q:Why should supercapacitors use graphite as electrode material?
- Because graphite material, light weight, good thermal conductivity and conductivity.
- Q:Graphite electrode press device
- Graphite electrode is mainly in the petroleum coke and needle coke, coal tar pitch as binder, calcination, mixing, kneading, pressing, baking and graphitization, and made the processing machine, is a conductor in an electric arc furnace to form arc release electricity for heating and melting of the charge, according to the quality index level, can is divided into ordinary power, high power and ultra high power.
- Q:What are the skills of hardfacing process for wear-resistant alloy powder blocks?
- The power supply adopts the DC arc welding machine with steep drop characteristic, adopts the positive connection method, the electrode is negative, and the electrode is a high strength spectrum pure graphite rod,
- Q:Which department in the steel plant needs graphite in large quantities?
- For steel and iron alloys, graphite electrodes are used, when powerful currents pass through electrodes into the melting zone of the electric furnace to produce an arcThe electric energy is converted into heat energy, and the temperature is increased to about 2000 degrees, so as to achieve the purpose of smelting or reaction. In addition, the electrolytic goldWhen the magnesium, aluminium and sodium are used, the anode of the electrolytic cell is also made of graphite electrode. The resistance furnace for carborundum is also made of graphite electrode as the burnerConductive material.
- Q:Excuse me, why does the graphite electrode flake when electrolyzed salt water is used?
- Device for electrolytic reaction. The electrolysis bath comprises a tank, an anode and a cathode, the majority of diaphragm separates the anode chamber and a cathode chamber. According to the different electrolyte aqueous solution electrolysis, molten salt electrolytic cell and nonaqueous solution electrolysis. When three kinds of direct current through the electrolytic cell, the anode oxidation the reaction solution and at the interface in the cathode and the electrolyte interface reaction, to produce the required products. To optimize the design of electrolytic cell structure, reasonable selection of electrode and diaphragm material is the key to improve the current efficiency, decrease cell voltage and energy saving.
- Q:Thermal expansion coefficient of graphite
- In the graphite electrode, the national standard, the volume density in more than 1.60 of both high power graphite electrode, of course because of the national standard index is low now, the volume density of normal power graphite electrode factory can reach 1.65, such as Chengde and long carbon factory.
- Q:Electrolysis of CuCl2 solutions with graphite electrodes
- The energization is the electrolysis of CuCl2 solutions, i.e., redox reactions. So you can't mix ionization and electrolysis.
Our products have been sold to Europe, Southeast Asia, South America, India, and other countries and regions. Meanwhile, Our Graphite Electrodes and nipples have already been ISO9001:2000 approved.
We will pay attention to product quality and offer you the best price. We hope that we could establish business relationships with all friends on the basis of equality and mutual benefits.
1. Manufacturer Overview |
Location |
Liaoning,China (Mainland) |
Year Established |
2004 |
Annual Output Value |
|
Main Markets |
11.11% North America 11.11% South America 11.11% Eastern Europe 11.11% Southeast Asia 11.11% Oceania 11.11% Mid East 11.11% Eastern Asia 11.11% Western Europe |
Company Certifications |
QUALITY MANAGMENT SYSTEM CERTIFICATE |
2. Manufacturer Certificates |
a) Certification Name |
|
Range |
|
Reference |
|
Validity Period |
|
3. Manufacturer Capability |
a)Trade Capacity |
|
Nearest Port |
|
Export Percentage |
61% - 70% |
No.of Employees in Trade Department |
|
Language Spoken: |
|
b)Factory Information |
|
Factory Size: |
Above 100,000 square meters |
No. of Production Lines |
Above 10 |
Contract Manufacturing |
OEM Service Offered |
Product Price Range |
|