GRP FRP Pipes Sea Water Pipe Series DN 1000
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Features & Benefits of GRP FRP pipe sea water pipe series
Corrosion-resistant
•Long, effective service-life materials
•No need for linings, coatings, cathodic protection, wraps or other forms of corrosion protection
•Low maintenance costs
•Hydraulic characteristics essentially constant over time
Light weight
(1/4 weight of ductile iron; 1/10 weight of concrete)
•Low transport costs (nestable)
•Eliminates need for expensive pipe handling equipment
Long standard lengths
(6, 12 metres)
•Fewer joints reduce installation time
•More pipe per transport vehicle means lower delivery costs
Extremely smooth bore
•Low friction loss means less pumping energy needed and lower operating costs
•Minimum slime build-up can help lower cleaning costs
Precision sealability
With elastomeric rubber rings
•Tight, efficient joints designed for bell & spigot to eliminate infiltration and ex-filtration
•Ease of joining, reducing installation time
• Accommodates small changes in line direction without fittings or differential settlement
Flexible manufacturing
•Custom diameters can be process manufactured to provide maximum flow volumes with ease of installation for rehabilitation
lining projects
High technology pipe design
•Lower wave celerity than other piping materials can mean less cost when designing for surge and water hammer pressures
High technology pipe manufacturing system producing pipe that complies to stringent performance standards (AWWA, ASTM, DIN, EN, etc.)
•High and consistent product quality worldwide which ensures reliable product performance
Control Testing of GRP pipe sea water pipe series
Raw Materials
Raw materials are delivered with vendor certification demonstrating their compliance with Zhongfu Lianzhong quality requirements. In addition, all raw materials are sample tested prior to their use. These tests ensure that the pipe materials comply with the specifications as stated
Physical Properties
The manufactured pipe’s hoop and axial load capacities are verified on a routine basis. In addition, pipe construction and composition are confirmed.
Finished Pipe
All pipes are subjected to the following control checks:
• Visual inspection
• Barcol hardness
• Wall thickness
• Section length
• Diameter
• Hydrostatic leak tightness test to 1.5 rated pressure (only PN6 and above)
On a sampling basis, the following control checks are performed:
• Pipe stiffness
• Deflection without damage or structural failure
• Axial and circumferential tensile load capacity
Thickness and Weight of Standard Pipes based on Internal Pressure of GRP pipe sea water pipe series
1. Internal liner (thickness 1.0 – 2.0 mm)
In tables bellow thickness include 1.5mm of liner and minimum pipe Stiffness 1250 Pa
2. Mechanical resistant layer in glass filament winding (based on internal pressure)
3. Top coat (0.2 – 0.3mm) . In tables bellow thickness include 0.2mm of top coat
Unloading,Handling,Transportation and Storage of GRP pipe sea water pipe series
Unloading and Handling Pipes
Unloading the pipe is the responsibility of the customer. Be sure to maintain control of the pipe during unloading. Guide ropes attached to pipes or packages will enable easy manual control when lifting and handling. Do not drop, impact, or bump the pipe, particularly at pipe ends.
If at any time during handling or installation of the pipe, any damage such as a gouge, crack or facture occurs, the pipe should be repaired before the section is installed.
Transporting Pipes
Strap pipe to the vehicle over the support points using pliable straps or rope. Never use steel cables or chains without adequate padding to protect the pipe from abrasion. Bulges, flat areas or other abrupt changes of curvature are not permitted. Transport of pipes outside of these limitations may result in damage to the pipes.
Site Pipe Storage
It is generally advantageous to store pipe on flat timber to facilitate placement and removal of lifting slings
around the pipe.
When storing pipe directly on the ground, be sure that the area is relatively flat and free of rocks and other
potentially damaging debris. Placing the pipe on mounds of backfill material has been found to be an effective
way of site storing the pipe. All pipes should be chocked to prevent rolling in high winds.
FAQ of GRP pipe sea water pipe series
Q1: What’s the performance standards?
Lianzhong pipe is designed to meet all of these ASTM , AWWA, BS, DIN standards.
Q2: What’s the qualification testing for the products?
Lianzhong pipe has been rigorously tested to verify conformance to the ASTM D3262, ASTM D3517, AWWA C950 and DIN 16868 requirements
Q3: How long can I receive my goods?
A: Usually, we will deliver products within 20 days after the contract is signed. Delivery time is negotiable when necessary.
- Q:Glass fiber reinforced plastic sand pipe backfill 5m, how much kg pressure?
- These two parameters are based on the need and the actual geological situation to determine, not a backfill a few meters can be determined.
- Q:Is there any ventilation duct made of glass fibre reinforced plastic in Baotou?
- Fiberglass pipeacid and organic glass steel fan shell with acid and alkali corrosion resistance, long service life, is mainly used in chemical, textile, printing, metallurgy, underground facilities for discharging corrosive gas places.
- Q:How to prevent the glass fiber reinforced plastic pipe from being damaged by aging or over pressure, causing the liquid to splash and hurt people
- If you are afraid of the glass tube will be such a question, the weak links or parts of the local reinforcement, the conditions can, can re pipe liner, to compression, anti ageing effect
- Q:What kind of material does glass steel ship honeycomb board use?
- The product adopts composite honeycomb structure, prefabricated glass fiber reinforced plastic panel, high strength glass fiber grid cloth and aluminum honeycomb core material, and is compounded by hot pressing. Because of the high strength of the grid cloth, the impact resistance and flexural strength of the composite board are very high.
- Q:What is the standard of flange coefficient for FRP ducts?
- Negotiations did not consider, people reported flange you have to consider, 15% below have been used to see your negotiating skills, there is no standard specification! The above said I have used, and now I generally talk about n yuan / square meter, including the wind pipe, pipe fittings, flanges and valve components to connect the flange are included in
- Q:How is the glass reinforced septic tank and the cement drain pipe connected?
- The interface can be bonded with epoxy resin adhesive. The epoxy resin strongly adhere to the two materials, but the bonding surface must be clean.
- Q:What's the process of continuous winding glass fiber reinforced plastic sand pipe?
- (1) die: the continuous flat steel supported by the reel, winding to form a round mandrel.(2) feeding: when the mandrel moves, advanced packing, glass fiber, resin and surface material are accurately placed under the control of program control (PLC) and microcomputer (PC).(3) monitoring: according to the prepared material input program, only the basic pipeline data can be input; the computer can calculate the mechanical operation settings by itself. Material consumption, pipe thickness and so on will be constantly monitored and recorded.(4) curing: induction heating of the curing process of the product is accomplished by the flat band and the infrared device which is directly heated in the product. The temperature of 20 different parts of the product in the curing zone will be measured and displayed in the form of an image on the computer screen.(5) cutting and trimming: the pipe can be cut from 0.3 meters to 18 meters under the predetermined length. The cutting, chamfering and caliber measurement are coordinated with the longitudinal movement of the product to ensure the accurate vertical cutting of the glass fibre reinforced plastic pipe and the killing of the outer diameter.
- Q:Slurry circulation glass fiber reinforced plastic pipe
- The slurry circulation FRP pipe project has long service life and is safe and reliable. The pipeline is durable and the safety factor is above 6. The pipeline life can reach up to 50 - 100 years. For example, the water supply pipeline from Shenzhen to Hongkong was built on the side of Hongkong, long 50KM, respectively, two kinds of glass pipes with inner diameter, 2.2m and 1.7m, which were installed and used so far in 1965, and they were left intact.
- Q:Galvanized steel sheet and inorganic glass fibre reinforced plastic pipe are calculated according to this norm or norm
- According to the project of quota valuation mode, input the actual quantity according to the quota item number, the following materials will automatically adjust the quota quota project, has been considering material wastage, when engineering calculation does not need additional.
- Q:How to improve the compressive strength of waste glass fiber reinforced plastic profiles (such as square tubes) should be started with resin, curing agent, glass fiber or other aspects!
- Ensure the solidification of glass steel products in a reasonable range, in general, glass fibre reinforced epoxy resin material curing degree if the use of amine curing agent, the best curing degree in the range of 135 degrees --150 degrees, polyester resin, Mohs hardness of about 60 is OK.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
GRP FRP Pipes Sea Water Pipe Series DN 1000
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords