fully automatic HDPE blown film machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1.HDPE extrusion
2.2-16L with single station
3.PE,PP bottle
4.full-automatic
blown film machine
The ZS series extrusion blow molding machine is used to produce all kinds of the hollow plastic containers for foods, toys, beverages, medicines, chemical products, pesticides, detergents, etc with material of PE,PP,PVC from 5ml to 20L,such as water bottles,milk bottles,medical bottles,oil bottles,plastic balls,cosmetic bottles,lubricant bottles,plastic containers. The machines are low investment, high efficiency, quick and safe operation, easy for trouble shooting, maintenance and other benefit.
Specifications | Unit | ZS-65B |
Material |
| PVC PE PP ABS EVA |
Max.Product Volume | L | 5 |
Number of Die | Set | 1,2,3,4,6 |
Dry Cycle | PC/Hr | 900x2 |
Machine Size (L x W x h) | M | 3.6x2.1x2.3 |
Machine Weight | KG | 3000 |
Clamping Unit |
|
|
Clamping force | KN | 30 |
Platen Opening Stroke | MM | 200-400 |
Plate Size | MM | 350x350 |
Mold Thickness | MM | 140-210 |
Max.Mold Size (W x H) | MM | 300x350 |
Extruder Unit |
|
|
Screw Diameter | MM | Ø65 |
Screw L/D Ratio | L/D | 23:1 |
Plasticizing Capacity | Kg/Hr | 62 |
Extruder Heating Power | KW | 18 |
Number of Heating Zone | Zone | 3 |
Extruder Driving Power | KW | 11 |
Die-Head |
|
|
Number of Heating Zone | Zone | 3-5 |
Power of Die Heating | KW | 6 |
Center Distance of Double Die | MM | 160 |
Center Distance of Three Die | MM | 80 |
Center Distance of Four Die | MM | 60 |
Max Die-Pin Diameter | MM | Ø75 |
Power |
|
|
Max Drive | KW | 5.5 |
Total Power | KW | 38 |
Fan Power for Screw | KW | 0.3x3 |
Air Pressure | Mpa | 0.8 |
Air Consumption | M3/min | 1.0 |
Average Energy Consumption | Kw/Hr | 18 |
- Q:Seeking a set of oil filter drawings, the effect of good points, thank you, you can discuss
- Oil filter related drawings are numerous, there are structural schematics, technical principles, flow charts, electrical control charts, electrical schematics, etc., you do not say clearly what you need.If you need an inquiry oil filter, you can look for the relevant enterprise and let them send it to you
- Q:The working principle of vacuum oil filter and centrifugal oil filter in oil filter and the difference between them
- I. application and characteristics of oil filterThe oil filter is a vacuum oil filter, which is mainly used for purification and regeneration of turbine oil in power plants and power stations. Make the oil meet the operating standards. The oil filter is characterized by:
- Q:I change the oil machine! I recently changed my false engine oil! It ran 2000 kilometers! Can you change the oil filter instead of the engine oil?
- Hello, replace the oil, you must replace the filter, filter oil filter impurities, or you change the new oil, filter impurities will cycle up, the new oil on the white change.
- Q:The first filter is not clear! Very cloudy! The second time is almost enough! Does it still have anything to do with temperature? The filtered peanut oil! The virgin oil, which has just been squeezed out of the machine, has not been filtered by vacuum!
- Salt water and sludge are thrown to the wall, and out of the net oil, with centrifugal filtration, the first temperature must be 80 degrees for the best
- Q:Points for attention of vacuum oil filter
- 1, the power supply, you must connect the ground wire to operate.2, before the operation, pay attention to the direction of motor rotation, in line with the arrow direction.3, no oil circulation, shall not turn on the heater, otherwise it will burn the heater, heavy will be fried.4 、 drain all the oil outlet valve before draining.5, the working environment temperature is lower than 30 DEG C, higher than +40 degrees centigrade, should not use.
- Q:Characteristics of vacuum oil filter
- Two, main use 1, can be used for various oil immersed transformers, oil immersed current transformer and high pressure less oil circuit breaker, on-site oil filtration and oil filling. 2. It can be used for on-site hot oil circulation drying of the equipment, especially for oil field current, voltage transformer and high voltage less oil circuit breaker on-site hot oil circulation drying is more effective. 3, can be used for sealing oil immersed equipment on-site vacuum oiling and oil filling and equipment vacuum pumping. 4. It can also be used for regeneration and purification of slightly deteriorated transformer oil, so that its performance can reach the standard of qualified oil. 5. It can also be used in power plants, power plants, power companies, power transformation industry, metallurgy, petrochemical, machinery, transportation, railway and other industries. PSDZJ series vacuum oil filter product overview PSDZJ series vacuum oil filter is the ideal equipment for the maintenance department of the electric power field to inspect and repair all kinds of high and low voltage (500KV or less) insulation oil for power transmission and transformation equipment.
- Q:What is the trouble with the vacuum pump used in the oil filter? How can it be removed so that the oil filter works properly?
- 3. long time shutdown, before starting the vacuum pump, should be interrupted repeatedly start the vacuum pump;4. after using the vacuum pump, vacuum pump should be put on;5. in the vacuum pump operation, the oil temperature should not be higher than 75 degrees, such as the cause of the fault, please contact the vacuum pump manufacturers immediately;6. if the vacuum pump is inhaled impurities, dust, moisture, chemicals and other potential dangers, should be equipped with precision filter in vacuum pump inlet position, if the impurities, dust, water is too large, must be filtered with piggy bank, in order to prevent dust and water chemical substances and other impurities in the vacuum pump;7. if the vacuum pump takes 24 hours to operate, the vacuum pump must be maintained and repaired every six months;8. vacuum pump in the normal operation, should keep the pump vacuum oil is not less than oil marking, should be in the oil mirror 2/3, refueling, strictly prohibited with different grades, models of vacuum pump oil mixed use9., regular replacement of vacuum pump oil, usually 3~6 months for a replacement, such as the discovery of pump oil, emulsification, carbonization and other circumstances, should also be timely replacement of vacuum pump special oil
- Q:Working principle and operation instructions of vacuum oil filter for oil press
- Vacuum pump to vacuum tank air to form a vacuum, outside the oil under the influence of the atmospheric pressure through the entrance pipe into the primary filter, remove larger particles, and then into the heating tank, heated by 40 degrees to 75 degrees of oil through the automatic oil float valve, this valve is automatic control into the vacuum tank of oil import balance, after heating the oil whirl through the spray wing separating oil into a mist, oil and water in the rapid evaporation of water vapor into the vacuum pump and continuous inhalation of condenser.
- Q:What are the 3 basic requirements of hydraulic system for hydraulic oil filters?
- The two is to look at the oil situation, to choose whether to filter impurities, or choose to filter water, but also to filter impurities
- Q:Why does the oil filter run out of vacuum? How can we solve it?
- The oil filter in the operation process, occurring commonly used vacuum pump oil phenomenon, this is because the oil in the water too much, vacuum pumping, lead to a bubble too much, and some manufacturers of vacuum oil filter machine is not installed on the oil filter with automatic defoaming device, resulting in excessive foaming due to vacuum separator. The oil ejected from the exhaust of the vacuum pump in the mouth
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
fully automatic HDPE blown film machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords