Q:how to wire a receptacle with 6 wires?

use 3 wire nuts and 3 jumpers, color to color and then connect the others together. Black wire to the dark screw, white color to the silver screw and the green to the ground connection. If this does not make sense to you contact a local qualified professional electrician to do the work.

Q:I attempted to change a bathroom fan to a new one with the help of a friend. He disconnected all the wiring without paying attention to what he was doing and what was wired where. We have a set of wires coming from somewhere (I presume the fuse box) to the fan that is hot regardless of the switch being on or off. That has a black, white and naked wire in it. Then we have another wire that comes from the switch that has black, white and naked as well. The fan has black, white and green. Can someone please tell me how to connect these as we have tried everything and the only thing that works is wired to the constant hot which of course won't allow us to turn the fan off with the switch...

You need to pull your wall switch to see how it is wired. I suspect the original wiring used the black and white on the switch itself which would make the white actually black or hot instead of neutral. If on one side of the wall switch the black wire is wired and the other the white then you need to wire the black from the fuse panel to the black going to the switch. Then the white coming from the switch to the black on the fan. The white on the fuse panel wire would be wired to the white from the fan and all grounds(bare and green) wire together.

Q:If someone were holding onto a high-voltage wire by both hands, why would his/her body have the same potential as the wire? How come his/her body would attain the same potential as the wire?

No however the guy`s physique would be on a similar voltage skill because of the fact the intense voltage cord and as a result would be situation to arching off to any conductor this is related to floor and as a result inflicting intense present day to bypass during the guy`s physique inflicting electrocution. the guy would be risk-free putting directly to a single intense voltage cord as long as he would not come close to or touch yet another merchandise that conducts present day back to floor. If the cord breaks there will be an astonishing arch on the factor of the wreck and can maximum probably leads to burns intense sufficient to reason death to everybody clinging to the cord at that factor. in case you have survived as a result far then with the aid of all skill throw the cord you're clinging to as far away out of your physique as achieveable because of the fact with the coolest fortune you're having the cord you're conserving stands out as the warm edge of the wreck and you would be electrocuted as quickly as you attain the floor.

Q:i recently replaced my spark plug wires on my 97' lincoln continental. i was wondering if i should get plug wire shielding for them also......thanx

A Dodge Continental?

Q:i need the wire diagram for a kenwood kdcmp4032.... i mainly need to know which wire to hook up the remote wire for an amp.

Blue/white okorder /

Q:What do you use to seal up the hole in the OUTSIDE wall where the cable TV and telephone wires and electrical wires all go thru? I want to replace my telephone wire coming in to the house, because I have DSL and it is really slow. I figured it couldn't hurt to replace the 45 year old wire coming in! :D I'm gonna use the best wire I can find (ANY SUGGESTIONS on what kinda wire to get? :D) to go from the telephone box outside to the DSL jack, but I need to no what to use to seal up the outside hole, when I rip out whatever is plugging it up now! :DThanks! ~Cindy! :D

Cat 5e cable for the DSL. Clear 100 percent silicon calk for the hole. Keep the factory twists in the cat 5 pairs for as close as you can get them to your terminations for speed. Clean the terminal connectors where you connect the wires. Keep the cat 5 away from electric wires as much as possible. Good luck.

Q:Or can stranded wire of the same gauge be subsitituted for solid wire without any consequences? The reason I ask is because its for a massive 4kJ capacitor discharge circuit, and I need all the energy delivered to the power coils im using, cant afford to have much leakage inductance.

Stranded wires have slightly higher inductance than solid wires, but this is noticable only on transmission lines and larger conductors. if you are only using a short conductor, i don't think the inductance of the wire will affect the system, unless the wire is coiled.

Q:how we can predict the maximum load that stainless steel cable wire can achieved?

Hi all… The wire made of stainless steel is mostly used in the balustrade work, fixing tasks, decks and handrails. Due to the heavy duty usage the wire needs to be very strong and long so that there is no scope of breakage. The wire are made up of 316 marine grade the quality of wire is very tough and should be strong enough to cope up with harsh conditions prevalent in Australia.

Q:i have a 2002 pontiac sunfire where is my ground wire located? what does it look like?

Ground wire for what?

Q:I've started cutting wire and bending it into shapes to create animals or images, but the problem is, I need to know how to make each piece stick together without any glues as they make the art dulled and the metal looses its shine :/ any suggestions?

I did wire art in college and we had to use just the wire as well, so I just used needle nose plyers and did a lot of twisting to hold the wires together.